Photonics Dictionary

The elimination of magnetic fields from within a material as that material makes the transition from the normal to superconducting state.

A MEMS fiber optic switch is a microelectromechanical system (MEMS) device designed to selectively route optical signals between multiple fiber optic channels. These switches utilize miniature...

Metabolic imaging refers to the visualization and quantification of metabolic processes within living organisms, tissues, or cells using various imaging techniques. It provides insights into the...

Devices in which the lasing medium is a vapor of metal atoms or ions, sometimes mixed with another gas. Metal vapor lasers use a variety of metal types to generate a variety of laser lines for...

A thin layer of metal deposited on the surface of a substrate. The film may serve as a reflector, beamsplitter, neutral density filter or electromagnetic interference filter.

Metamaterials are artificial materials engineered to have properties not found in naturally occurring substances. These materials are designed to manipulate electromagnetic waves in ways that are not...

Metasurfaces are two-dimensional arrays of subwavelength-scale artificial structures, often referred to as meta-atoms or meta-elements, arranged in a specific pattern to manipulate the propagation of...

Micro-robotics refers to the field of robotics that involves the design, development, and application of miniature robotic systems, often at the microscale. These robots, commonly referred to as...

An electromagnetic wave lying within the region of the frequency spectrum that is between about 1000 MHz (1 GHz) and 100,000 MHz (100 GHz). This is equivalent to the wavelength spectrum that is...

A mid-infrared camera is a type of imaging device designed to capture images in the mid-infrared (mid-IR) spectral range, typically spanning wavelengths from approximately 3 to 12 µm. This...

Mie scattering, named after the German physicist Gustav Mie, refers to the scattering of electromagnetic radiation (such as light) by spherical particles. Unlike Rayleigh scattering, which is...

In optics, "mode beating" refers to an interference phenomenon that can occur in laser systems with multiple longitudinal modes. Longitudinal modes are specific electromagnetic field patterns that...

A multiline laser system refers to a type of laser that is capable of emitting multiple discrete wavelengths or spectral lines simultaneously. Unlike single-line lasers, which produce radiation at a...

Multispectral imaging is a technique that involves capturing and analyzing images at multiple discrete spectral bands within the electromagnetic spectrum. Unlike hyperspectral imaging, which acquires...

Nanophotonics is a branch of science and technology that explores the behavior of light on the nanometer scale, typically at dimensions smaller than the wavelength of light. It involves the study and...

Nanoplasmonics is a branch of nanophotonics that focuses on the study and manipulation of optical phenomena at the nanoscale using plasmonic materials and structures. Plasmonics deals with the...

Nd:YAG laser refers to a solid-state laser that utilizes neodymium-doped yttrium aluminum garnet (Nd:Y3Al5O12) as the gain medium. This type of laser emits light at a wavelength of 1064 nm in the...

The area closest to an aperture or source where the diffraction pattern differs substantially from that observed at an infinite distance, or more specifically, the far field. Also referred to as the...

A near-infrared (NIR) camera is an imaging device designed to capture images in the near-infrared region of the electromagnetic spectrum. The near-infrared spectrum typically extends from about 700...

A near-infrared (NIR) spectrometer is an analytical instrument used to measure the absorption, transmission, or reflection of light in the near-infrared region of the electromagnetic spectrum....

Near-infrared spectroscopy (NIRS) is a non-invasive analytical technique that uses the near-infrared region of the electromagnetic spectrum to study the absorption of light by molecules in a sample....

An artificial material, engineered to have a negative refractive index value, such that light or any other form of electromagnetic radiation bends in the opposite direction than it would in ordinary...

A form of liquid crystal with an appearance of moving, threadlike structures, particularly visible when observed in thick specimens with polarized light. During this phase, the molecules of the...

A pollution-measuring device used to detect the presence of nitric oxide regardless of other gases present. It utilizes the principle of laser magnetic resonance (LMR).

A nitrogen vacancy (NV) refers to a specific type of defect or impurity in a crystal lattice where a nitrogen atom replaces a carbon atom adjacent to a vacancy (an empty lattice site) in the diamond...

Any testing method for materials and components that does not damage or destroy the test sample. Some of the methods used are x-ray, ultrasonic, electro-optic and magnetic testing.

A nonlinear crystal is a type of crystal that exhibits nonlinear optical properties when subjected to intense electromagnetic fields, typically from laser light. Unlike linear optical materials,...

Nonlinear optical materials are substances that exhibit optical properties that are not linearly proportional to the intensity of incident light. In other words, these materials produce optical...

Nonlinear polarization refers to the phenomenon where the polarization of a material responds nonlinearly to an applied electric field. In linear systems, the polarization of a material is directly...

A nonradiative transition refers to a process in which an electron or an atom undergoes a change in its energy state without emitting a photon. In contrast to radiative transitions, where a photon is...

A chemical detection technique used to measure molecules that have a magnetic dipole moment. The analysis is directed to nucleuses which have a quadrupole moment which leads to an asymmetric electric...

Optical cements and adhesives are specialized materials used in the assembly and bonding of optical components in optical systems. These materials are designed to provide secure and durable bonds...

A mechanical or electrical-electromagnetic device for periodically interrupting or blocking abeam of light for a brief known interval. The three most common chopper types include the tuning fork...

An optical clock is a highly precise and advanced timekeeping device that relies on the oscillations of electromagnetic radiation in the optical or ultraviolet part of the electromagnetic spectrum....

Optical fiber is a thin, flexible, transparent strand or filament made of glass or plastic used for transmitting light signals over long distances with minimal loss of signal quality. It serves as a...

Optical glass refers to a type of glass specifically engineered and manufactured for use in optical components and systems, such as lenses, prisms, mirrors, and filters. Optical glass is...

Optical memory is a type of data storage technology that uses light to read and write information. It typically involves the use of lasers to encode data onto an optical medium, such as a disc, and...

1.) Generally, the electromagnetic spectrum within the wavelength region extending from the vacuum ultraviolet at 40 nm to the far-infrared at 1 mm. 2.) The wavelength or color distribution...

Optical strain sensors are devices that utilize optical principles to measure the deformation or strain experienced by a material under mechanical stress. These sensors convert changes in strain into...

Optics is the branch of physics that studies the behavior and properties of light, including its interactions with matter and its manifestation as both particle and wave phenomena. It encompasses the...

Any organic substance, that when dissolved in appropriate liquid based solvents will absorb and emit electromagnetic radiation in the near ultraviolet, visible and near infrared spectral regions....

A crystal having the axes of its grains aligned so that they have directional magnetic characteristics.

Parallel scanning refers to a method of acquiring data or images simultaneously from multiple sources or in parallel, rather than sequentially scanning each source one after another. This approach is...