Systems Installation

Hamamatsu Photonics started construction on a factory at its Shingai site in Japan. The new site will serve to increase overall construction capacity in the post-processing (dicing, assembly, and...

The University of Rochester’s Laboratory for Laser Energetics (LLE) and the U.S. Department of Energy’s National Nuclear Security Administration (NNSA) have finalized a cooperative...

The University of Twente opened its BioImaging Centre, which serves as the core facility for microscopy at the university’s Technical Medical Centre. The facility is equipped with confocal...

Resolve Optics installed and commissioned a new vibration test center adding to the suite of in-house lens-testing equipment the company is able to offer. Lenses used in harsh industrial inspection...

The BC43 WF and SR from Oxford Instruments Andor are widefield and super resolution, respectively, benchtop microscopes for studying single cell and multicellular organoids, tissue sections, and...

The MO2X microscope optics from Optris GmbH are 2× magnification optics meant for use with Optris’ PI 640i infrared camera. Able to capture infrared images of complex structures, the...

Helping engineers develop the scientific instruments of tomorrow. Olympus Scientific Solutions is now Evident, but our commitment to manufacturing high-quality microscopy components and optics is...

The VALO Tidal from HÜBNER Photonics is a femtosecond fiber laser that can be used for simultaneous second and third harmonic imaging using standard microscope objectives, broadband terahertz...

An optical coating engineer is frequently confronted with a difficult specification for a coating. Often the difficulty in the specification results from the particular form of the optical system. If...

Reading and writing systems for polygonal scanners differ in the use of the scanner. However, many performance characteristics are similar for both. In writing applications, a light source, usually a...

A lens collects light from a point on an object and focuses it to a corresponding conjugate point on an image. Under most conditions, the lens fails at this task because of some error in the...

Electrical engineers are very familiar with the effects of shot noise, thermal noise, flicker noise and crosstalk, and recognize how these effects can reduce the signal-to-noise ratio (SNR) in their...

Raman spectroscopy is a powerful non-invasive, non-contact tool capable of identifying molecular constituents of samples. Wavelength selective optical filters are used to block the dominant Rayleigh...

The FISBA READYBeam™ is our answer to customers' increasing demand for compact, powerful, and reliable multicolor laser source that can be easily integrated into existing set-ups. The multicolor...

Shanghai Optics offers first-class Design for Manufacturing (DFM) services. We are proud of our track history helping customers improve product quality and reduce their manufacturing cost...

The Cricket™² is a plug & play camera image intensifier attachment enabling low light level imaging and extreme high shutter speeds for CMOS and CCD cameras. The Cricket™² fitted with a single MCP...

Optical components such as lenses, mirrors, prisms, and windows undergo tight quality control to deliver optimal optical transfer function. Any scratch, dig, chip pinhole, or other defect will...

Microlenses are critical components used in a wide variety of consumer devices and industrial sensors, ranging from cellphone cameras and virtual reality goggles to 3D displays and advanced...

Integrated circuit (IC) manufacturing already requires the use of advanced technology nodes down to 5 nm, and has roadmap plans requiring 2 nm for production within the next couple of years. The...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Micromachining laser systems are advanced tools that use laser technology to perform highly precise material removal and modification at micro and nanoscales. These systems enable the fabrication of...

A detector-Dewar assembly typically refers to a combination of a detector and a Dewar flask used in scientific instruments, particularly in the field of infrared spectroscopy or other applications...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

Fusion ignition refers to the point in a controlled nuclear fusion reaction where the energy released by the fusion reactions becomes self-sustaining, leading to a continuous release of energy...

Optimax announces Joseph Spilman will take over as CEO. Corning offers to make changes following an antitrust investigation. And researchers develop a new system to detect MPox. Hear how this system...

Learn how to assemble a microscope system using Edmund Optics® 120i Plan APO Infinity Corrected Objectives. These are infinite conjugate microscope objectives that offer exception image flatness...

In this month's Light Matters Extra, we give you an in-depth look at the relationship between researchers and scientists at the University of California Davis, and surgeons and clinicians at nearby...

-Nanovolcanoes -QD Microscopy -Nuclear Detection This week on Light Matters: light scattering and nanolithography combine for drug delivery, quantum dots bring together the best of optical and...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Polarization Maintaining Couplers Evanescent Optics Inc. offers low loss (<0.1dB), high isolation (<-25dB) PM fiber-optic couplers in both fixed ratio and variable models. Our small...

DK Photonics is a leading manufacturer of innovative and high quality optical passive components. We provide complete and integrated solutions from 400~2100nm. DK Photonics produces a large array of...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...