Eric Lindner to Head FBGS

The SSI SCHAEFER Group, an international provider of modular warehousing and logistics solutions, and DS AUTOMOTION, a provider of mobile robotics, signed an agreement under which SSI SCHAEFER will...

Leaders from across Europe’s photonics industry will join an Important Project of Common European Interest (IPCEI) focused on the development of microelectronics and communications technologies...

The need for modern technologies to dismantle existing underwater infrastructure is growing due to increasing demand for renewable energy sources. For example, to bring a wind power plant in the sea...

Although MRI scanners provide 3D images of exceptional quality, the strong magnetic fields used to create these images have fluctuations that can introduce errors and disturbances in scans....

XIMEA's prototype models from the xiX-camera line are equipped with Sony’s Pregius™ sensors that easily replace former Sony CCD sensors. The models’ CMOS sensors are present in the...

The ZEISS ABIS III is designed for reliable and early inspection of the entire component surface, within cycle time. The combination of projector, cameras, lighting, and the new software ZEISS ABIS...

The Aura family from Phlux Technology are avalanche photodiode (APD) infrared sensors based on Phlux’s noiseless InGaAs™ APD technology. The sensors can be operated with APD gains up to...

The SS110 automatic specialty stripper and CT110 and CT111 automatic specialty cleavers from Fujikura were designed with versatility and ease of use in mind. The SS110 is applicable to a range of...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

As system and cable installers try to optimize their links, the preferred method has become high-speed DWDM. This demand for bandwidth has led to the development of new test and measurement...

As bit rates increase to meet expanding demand, systems have become increasingly sensitive to polarization-related impairments. These include polarization mode dispersion (PMD) in optical fibers,...

Adhesives for fiber optic components that perform well on glass, metal, ceramic and most plastic substrates provide excellent chemical and solvent resistance. They also can act as an electrical...

Lumispot Tech Laser Solution - Light source of 1550 nm/1535 nm pulsed fiber laser for laser lidar used in unmanned driving, with the function of ranging, detection etc.

In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market faster. Developing...

Explore Lumispot Tech's advanced remote sensing mapping laser solutions, enhancing geospatial technology and insights. Delve into our capabilities in satellite imagery, aerial mapping, and spatial...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

Optical fibers made of fused silica have many applications, such as communication, sensing, and laser systems. The performance of optical fibers is highly sensitive to the manufacturing processes and...

Optical fibers made of fused silica have many applications, including communications, manufacturing, medical care and diagnostics, and research. These applications are as varied as the requirements...

An increasingly wide range of applications need to be able to function in harsh environments, not only on space missions but also here on Earth, in particle detectors, for example. It is important to...

Since they first appeared in the 1990s, photonic crystal fibers (PCFs), thin strands of glass with an intricate array of hollow channels running along their length, have ushered in a new era of...

Optical strain sensors are devices that utilize optical principles to measure the deformation or strain experienced by a material under mechanical stress. These sensors convert changes in strain into...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

Free-space optics (FSO), also known as optical wireless communication or optical wireless networking, refers to the transmission of data using modulated beams of light through free space (air or a...

Our representative Victoria offers a brief overview of Armadillo SIA. We stand behind every fiber we offer to our customers, providing consistency, quality, competitive pricing and fast delivery. Our...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Light is not always simply light when it comes to clinical diagnoses, light is the key to prediction accuracy in analytical quality. Our solution: a flexible fiber optic multi-branch device with...

Tune into this month’s edition of Light Matters for the complete list of Photonics Media’s Industry Beacon award winners. We’ll also introduce you to an Industry Beacon in the Educator category, and...

In optics and photolithography, a phase mask refers to a device that modifies the phase of light waves passing through it. The phase mask is used to control the spatial distribution of the light's...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A photodiode is a two-electrode, radiation-sensitive junction formed in a semiconductor material in which the reverse current varies with illumination. Photodiodes are used for the detection of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Teledyne Judson Technologies (TJT) is a global leader for IR sensors from the Visible to VLWIR spectrum. Two-dimensional FPAs (InGaAs, InSb, and MCT) and Integrated Dewar Cooler Assemblies (IDCAs)...

Polarization Maintaining Couplers Evanescent Optics Inc. offers low loss (<0.1dB), high isolation (<-25dB) PM fiber-optic couplers in both fixed ratio and variable models. Our small...

Arkwright Technologies design and manufacture application specific fiber Bragg grating (FBG) sensors. Our innovative, award winning designs have evolved from over 30 years direct expertise in the...