CVI Augments Prototyping Capabilities with Acquisition

With the development of a single-layer, blue-emitting OLED, researchers at the Max Planck Institute (MPI) for Polymer Research demonstrated that one-layer OLEDs can achieve a performance level...

The range of optical systems in which reflective optics appear is an appropriate indicator of the importance of these components. Mirrors are ubiquitous in the optical bench setups that enable...

Researchers have developed a technology that uses meta-optical devices to perform thermal imaging. The approach captures richer information about imaged objects, including spectral and polarization...

Quantum computing firm Quantinuum named Rajeeb Hazra CEO. Outgoing CEO Ilyas Khan will assume the roles of chief product officer and vice chairman of the board of directors. Hazra most recently...

The FLIR CM276 from Teledyne FLIR is a clamp meter that combines thermal imaging with electrical measurement for inspecting and troubleshooting electrical systems, solar panels, pumps, and motors....

The FLIR A6301 from Teledyne FLIR is a cooled midwave thermal imaging camera designed for inspection and automation applications in production lines. Capturing high-speed product movement with up to...

The Mini Blackbird 1280 HFM from SemiConductor Devices is an MWIR high-definition detector for applications in aerial defense and surveillance. The sensor’s accompanying proximity electronic...

Edmund Optics’ line of sapphire aspheric lenses is designed for high-power laser and material processing applications. The lenses deliver diffraction-limited performance with a 50% reduction in...

An optical coating engineer is frequently confronted with a difficult specification for a coating. Often the difficulty in the specification results from the particular form of the optical system. If...

The common polycrystalline materials used for optical thin-film materials do not satisfy the requirements of telecommunications because of the instabilities caused by moisture absorption in their...

With a specific gravity of 1.85 g/cm3, beryllium is the lightest metal that is workable. It is 45 percent lighter than aluminum and approximately five times as stiff. Its stiffness to weight ratio...

What are thin-film coatings? The purpose of any optical thin-film coating is to modify the transmittance and reflectance properties of the substrate material to which they are applied. Most coatings...

Reynard Corporation has all the facilities necessary to design, fabricate and qualify state of the art coatings for numerous applications. Our precision optics are found in high performance systems...

MKS Newport spectral optics product overview providing a summary of competencies in diffraction gratings, optical filters, optical mirrors, OptoFlash multichannel spectrometer engines, and design &...

Dual-Band IR filters for the MWIR and LWIR provide high performance in-band and out-of-band.

Anti-reflective (AR) coatings are now entering their second century and have remained virtually unchanged throughout their life. As power level and wavelength range requirements continue to increase,...

Large reflective optics are essential for high-performance multispectral electro-optics imaging systems in defense, surveillance, and aerospace. These systems capture multiple wavelengths to improve...

Lasers are made of physical matter. Therefore, the natural degradation of their materials can cause variability in performance. Aging optics often cause slow changes in laser behavior and, when left...

Most of us are familiar with the many benefits that laser-based additive manufacturing brings to manufacturing, including reduced tooling costs, easier testing of complex geometries, and faster time...

Infrared coatings, also known as IR coatings, are specialized optical coatings designed to manipulate the transmission, reflection, and absorption of infrared (IR) radiation within a specific...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

Infrared optics refer to optical components and systems designed to manipulate and control infrared (IR) light, which lies beyond the visible spectrum. These components are crucial for various...

Materion engineers advanced materials that help save lives, help explore space, connect people, deliver energy, support defense, and navigate the world. We deliver innovative designs and prototype...

Specim FX120 is an advanced long-wave infrared hyperspectral camera with a full LWIR spectral range of 7.7 to 12.3 µm. This fast push-broom thermal hyperspectral camera is set to redefine chemical...

Join Telops Scientific Product Line Manager for a first look at the next-generation of high dynamic range thermal imaging systems, the HDR M700. Featuring a revolutionary on-chip saturation...

Introducing our latest innovation at MoviTHERM! Join Dave Bursell and Todd Faulkner as they unveil our cutting-edge thermal monitoring solution, the iTL Gateway. Connect infrared cameras and gateways...

A metallic coating is a thin layer of metals deposited on the surface of a substrate. The film may serve as a reflector, beamsplitter, neutral density filter or electromagnetic interference filter.

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Avantier Inc. is an unparalleled leader in providing innovative imaging systems solutions and optical systems solutions. We offer advance precision custom optical design, optical engineering...

ISO 9001 & ISO 13485 certified and D&B DUNS # 113515303 Shanghai Optics is an unparalleled custom system solution provider offering advance precision custom optical design, engineering,...

Experts In Thin-film Coating Design We practice a design-before-quote approach to help customers refine specifications and minimize technical risk. We understand how coated optical elements...