BIOLASE Appoints CFO, COO: People in the News: 07/13/22

Quantum computing firm Quantinuum named Rajeeb Hazra CEO. Outgoing CEO Ilyas Khan will assume the roles of chief product officer and vice chairman of the board of directors. Hazra most recently...

During its Annual General Meeting 2023, the European Photonics Industry Consortium (EPIC) confirmed the selection of Shahida Imani, CEO of Chromacity, to its board of directors. Imani is a chartered...

Sensor technology company Leuze named Xavier Hamers CEO and chairman of the executive board of the global Leuze electronic Inc., effective April 1. Hamers joins the company from BARTEC Safe.t...

TRUMPF subsidiary TRUMPF Photonic Components named Thomas Dobbertin managing director. He succeeds Berthold Schmidt, who now serves as CTO and a member of the board for parent company TRUMPF SE + Co....

The CXP-C3240 (shown) and SFP-C3240 from Imperx are high sensitivity cameras that can be used in applications such as automated inspection, surveillance, traffic monitoring, medical imaging, and...

The LBX-488 LaserBoxx diode laser from Oxxius SA provides a low-noise optical output, ultrahigh beam quality, and fast modulation. The system consists of a laser diode emitter with an...

The Waterlase Fractional Handpiece from Biolase Inc. is a dermatologic laser for skin resurfacing featuring an erbium, chromium, yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser and water...

Evident’s FLUOVIEW™ FV4000 confocal laser scanning microscope and FV4000MPE multiphoton laser scanning microscope, feature advancements in imaging technology that empower researchers to...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

Given the pace at which technology advances, there always seems to be a learning curve. With the abundance of consumer electronics available, there typically is no right or wrong way to use these...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

The Cricket™² is a plug & play camera image intensifier attachment enabling low light level imaging and extreme high shutter speeds for CMOS and CCD cameras. The Cricket™² fitted with a single MCP...

This application note demonstrates the use of ATR-FTIR spectroscopy for the analysis of human serum albumin. An IR5 FTIR spectrometer was used, equipped with a heated ATR accessory, to help tackle...

How to achieve high-performance 7-channel multiplex imaging, with Kromnigon’s multiband filter technology and CoolLED’s precision-controlled LED illumination.

Explore Lumispot Tech's advanced remote sensing mapping laser solutions, enhancing geospatial technology and insights. Delve into our capabilities in satellite imagery, aerial mapping, and spatial...

Anti-reflective (AR) coatings are now entering their second century and have remained virtually unchanged throughout their life. As power level and wavelength range requirements continue to increase,...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Microscope objectives are critical for high-magnification machine vision applications. The numerical aperture (NA) of an objective, or any imaging lens assembly, is one of the most important...

The last 25 years have seen Raman microscopy evolve from a relatively slow spectroscopic imaging technique, which could take days to image a sample, to an accepted rapid and powerful technique. It is...

Gallium arsenide phosphide (GaAsP) is a semiconductor alloy composed of gallium (Ga), arsenic (As), and phosphorus (P). It is commonly used in the fabrication of optoelectronic devices, particularly...

Epitaxial deposition is a process used in semiconductor manufacturing and materials science to grow a thin crystalline layer, known as an epitaxial layer, on a substrate. The term epitaxial refers to...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

An infrared camera, also known as a thermal imaging camera or IR camera, is a device that captures and visualizes the infrared radiation emitted by objects, revealing temperature variations across...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

In this month's Light Matters Extra, we give you an in-depth look at the relationship between researchers and scientists at the University of California Davis, and surgeons and clinicians at nearby...

A coordinate measuring microscope is an instrument used to measure the coordinates of a point on an object such as a photographic plate.

A furnace, generally electrically heated, with a control system capable of following a cam by which the temperature can be made to go through a definite cycle over a period of days, or even weeks, if...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Teledyne Judson Technologies (TJT) is a global leader for IR sensors from the Visible to VLWIR spectrum. Two-dimensional FPAs (InGaAs, InSb, and MCT) and Integrated Dewar Cooler Assemblies (IDCAs)...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...