Search
Menu
Lambda Research Optics, Inc. - Limited Time Offer

Celestial light switch reveals lunar ranging data

Facebook X LinkedIn Email
Sarina Tracy, [email protected]

When certain members of the universe play a linear game of hide-and-seek, humans pay attention: Many don special solar glasses; others stay up late to catch sight of a burnt-orange moon. Solar and lunar eclipses are sights to behold, appearing just a few times a year and visible only to certain geographies. The power of an eclipse, however, can be harnessed for uses other than wonder: On Dec. 21, 2010, a group of scientists exploited the unique qualities of a lunar eclipse for the sake of solving a mystery – and saving its research.

Dr. Tom Murphy, a physicist at the University of California, San Diego, and his team at Apache Point Observatory in Sunspot, N.M., have been aiming laser beams at suitcase-sized reflectors placed on the moon by Apollo astronauts and unmanned Soviet rovers. By timing the laser beam’s return to Earth, the scientists can measure the distance to the moon with millimeter precision. The process, called lunar ranging, has revealed the moon’s slow, spiraling path away from us. The group uses those measurements of the lunar orbit’s changing shape to test Einstein’s theory of general relativity.


The laser beam heads toward the eclipsed moon, reflecting off a thin layer of clouds about 7 km above the lunar reflector site. Photo courtesy of Jack Dembicky.


Under normal conditions, a returning beam signal is faint, with just one photon coming back from a pulse of more than 100 quadrillion photons. In addition, the Earth’s atmosphere nudges some photons off target, hitting the lunar soil, while the reflectors slightly diffract the returning beam. Most photons miss the telescope when they return. These losses are expected and come with the territory of beaming a laser more than 450,000 miles round-trip.

However, Murphy and his team discovered that, over time, those already-faint signals returned by the reflectors had faded even further. They recorded 10 times fewer photons than expected, suggesting something amiss. On full-moon nights, the results were even worse, dropping to just 1 percent of the predicted performance. The researchers dubbed this “the full-moon curse.”

“For a while, we thought we were just victims of bad luck,” Murphy said, “but the trend continued month after month.”

DataRay Inc. - ISO 11146-Compliant

Accumulated moon dust on the reflector’s surface was blamed for the diminished returns, as light must pass through the surface of each prism twice – once on the way in and once on the way out. Although there is no wind on the moon, electrostatic forces and a constant bombardment by tiny meteorites kick up lunar dust, coating the clear glass prisms arrayed in each reflector. Murphy calculated that a dusting covering 50 percent of the glass would be enough to account for the dimming of the return signal they observed on most nights. What the dust didn’t explain, however, was the beam’s dramatic failure during a full moon.


The Apollo laser shines its beam from a telescope enclosure. Photo courtesy of Tom Murphy.


The explanation was surprisingly simple: heat. The prisms are sunk into cylinders so that the sun fully illuminates them only when it shines straight in. Because the arrays face Earth, that happens only on full-moon nights. When it does, the dark dust of the lunar regolith heats up, creating a thermal gradient between the surface and the depths of the prism. The performance is degraded by altering the refractive index, turning the prism into an unintentional lens and shifting the returning light so that even fewer photons return to the telescope.

To test this theory, the team had to turn off the sun. Metaphorically speaking, an eclipse does just that. If the poor performance on full-moon nights resulted from the prisms heating up, then turning off the light should boost the beam’s signal.

And so, for 5 1/2 hours on that night in December 2010, Murphy’s team ranged lasers from the observatory to four reflector arrays on the surface of the moon. When the Earth’s shadow passed across each prism, the researchers saw their predicted tenfold spike in performance, restoring the signal to normal levels.

“Getting rid of the sunlight in an ‘on, off, on’ test was an ideal way to test our primary suspicion,” Murphy said. “And we didn’t have to pay movers to put the moon in front of the sun – one of nature’s freebies.”

Published: May 2014
Glossary
diffraction
Diffraction is a fundamental wave phenomenon that occurs when a wave encounters an obstacle or aperture, causing the wave to bend around the edges and spread out. This effect is most commonly observed with light waves, but it can also occur with other types of waves, such as sound waves, water waves, and even matter waves in quantum mechanics. Wave interaction: Diffraction occurs when a wave encounters an obstacle (e.g., an edge or slit) or a series of obstacles, such as a diffraction...
einstein
A unit of energy equal to the amount of energy absorbed by one molecule of material undergoing a photochemical reaction, as determined by the Stark-Einstein law.
glass
A noncrystalline, inorganic mixture of various metallic oxides fused by heating with glassifiers such as silica, or boric or phosphoric oxides. Common window or bottle glass is a mixture of soda, lime and sand, melted and cast, rolled or blown to shape. Most glasses are transparent in the visible spectrum and up to about 2.5 µm in the infrared, but some are opaque such as natural obsidian; these are, nevertheless, useful as mirror blanks. Traces of some elements such as cobalt, copper and...
gradient
In image processing and machine vision, the rate of change of pixel intensity.
positioning
Positioning generally refers to the determination or identification of the location or placement of an object, person, or entity in a specific space or relative to a reference point. The term is used in various contexts, and the methods for positioning can vary depending on the application. Key aspects of positioning include: Spatial coordinates: Positioning often involves expressing the location of an object in terms of spatial coordinates. These coordinates may include dimensions such as...
telescope
An afocal optical device made up of lenses or mirrors, usually with a magnification greater than unity, that renders distant objects more distinct, by enlarging their images on the retina.
AmericasApache Point ObservatoryApolloarrayastronautsatmospherebeamscylinderdiffractiondistancedustEarthEclipseEinsteinglassgradientheatilluminatelensesLight SourcesLighter SidelunarMaterialsmoonNew MexicoOpticsperformancephotonspositioningPrismspulsereflectorsrefractive indexSan DiegoSHADOWsignalsolarSovietSunsunlighttelescopeTest & Measurementtheory of general relativitythermalTom MurphyUCSDUniversity of CaliforniasoilSunspotroverslunar rangingreturnfull mooncurseregolithLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.