Search
Menu
PI Physik Instrumente - Array Alignment ROS LB 8/24
Photonics Marketplace
47 terms

Definitions

Clear All Filters xsurface emission xDefinitions x
argon-fluoride excimer laser
An argon-fluoride (ArF) excimer laser is a type of ultraviolet laser that operates using a mixture of argon and fluorine gases. Excimer lasers are a class of gas lasers that emit light in the UV...
beam divider -> beamsplitter
A beamsplitter is an optical device used to divide a beam of light into two or more separate beams, typically by reflecting a portion of the incident light while transmitting the remainder....
beamsplitter
A beamsplitter is an optical device used to divide a beam of light into two or more separate beams, typically by reflecting a portion of the incident light while transmitting the remainder....
blackbody source
A blackbody source, often simply referred to as a blackbody, is a theoretical or practical physical object that absorbs all electromagnetic radiation incident upon it and emits radiation in a...
chemical sensing
Chemical sensing refers to the detection and measurement of specific chemical compounds or substances in various environments or samples. It involves the use of sensors or analytical techniques to...
colloidal quantum dots
Colloidal quantum dots (CQDs) are nanometer-sized semiconductor particles that are dispersed in a colloidal solution. These quantum dots have unique optical and electronic properties due to their...
cosine emission law -> Lambert's cosine law
Flux per unit solid angle leaving a surface in any direction is proportional to the cosine of the angle between that direction and the normal to the surface. A material that obeys Lambert's cosine...
direct time-of-flight
Direct time-of-flight (dTOF) is a technique used in 3D imaging and depth sensing to measure the time taken for light or electromagnetic waves to travel from a source to a target object and back to a...
edge-emitting LED
An edge-emitting light-emitting diode is a type of LED structure where light emission occurs primarily along the edge of the semiconductor chip rather than from the surface. Edge-emitting LEDs are...
fiber laser
A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...
field emission microscope
An image-forming instrument in which a strong electrostatic field causes cold emission of electrons from a sharply rounded point or from an object that is located on that point. The electrons are...
fluorescence correlation spectroscopy
Fluorescence correlation spectroscopy (FCS) is a powerful analytical technique used to study the dynamics and interactions of fluorescently labeled molecules in solution at the single-molecule level....
free-electron laser
A free-electron laser (FEL) is a type of laser that generates coherent, high-intensity electromagnetic radiation by using a beam of accelerated electrons as the lasing medium. Unlike traditional...
hyperspectral resolution
Hyperspectral resolution refers to the level of detail or granularity in the spectral information captured by a hyperspectral imaging system. In hyperspectral imaging, the electromagnetic spectrum is...
image intensifier
An image intensifier, also known as an image intensification tube or image intensification device, is a specialized electronic device used to amplify low-light-level images to make them visible to...
indirect time-of-flight
Indirect time-of-flight (iTOF) is a method used in 3D imaging and depth sensing to measure the distance to an object based on the time delay between the emission of a light pulse and the detection of...
infrared detector
An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...
ion emission
The ejecting of ions from the surface of a material.
Laser scanning
Laser scanning is a technology used to create precise digital representations of physical objects or environments by capturing their surface geometry and appearance. It involves directing a laser...
leading edge spike
In a sequence of laser pulse emissions, the intitial pulse that often helps initiate a reaction at the target surface, whereas the trailing edge maintains the reaction.
lidar
Lidar, short for light detection and ranging, is a remote sensing technology that uses laser light to measure distances and generate precise, three-dimensional information about the shape and...
microchannel plate
A microchannel plate (MCP) is a specialized electron multiplier device used in various applications such as particle detection, imaging, spectroscopy, and night vision technology. It consists of a...
optical materials
Optical materials refer to substances or compounds specifically chosen for their optical properties and used in the fabrication of optical components and systems. These materials are characterized by...
optical testing instrument
An optical testing instrument is a device or system used to evaluate and measure the performance, quality, and characteristics of optical components, systems, and devices. These instruments play a...
optics
Optics is the branch of physics that studies the behavior and properties of light, including its interactions with matter and its manifestation as both particle and wave phenomena. It encompasses the...
photocathodes
Photocathodes are specialized materials or surfaces that exhibit the photoelectric effect, wherein the absorption of photons leads to the emission of electrons. When photons with sufficient energy...
photoelectric effect
The emission of an electron from a surface that occurs when a photon impinges upon the surface and is absorbed. This effect is the means by which photons may be detected.
photoelectric emission
The electron emission from a substance or instrument whose surface has been bombarded by a suitable amount of radiation.
photoelectron microscopy
Surface analysis by means of photon induced electron emission. PEM methods provide high lateral resolution of the observed sample.For surface material sciences PEM allows the investigation of...
photoemission -> photoelectric emission
The electron emission from a substance or instrument whose surface has been bombarded by a suitable amount of radiation.
photoemissive effect -> photoelectric effect
The emission of an electron from a surface that occurs when a photon impinges upon the surface and is absorbed. This effect is the means by which photons may be detected.
photomultiplier tube
A photomultiplier tube (PMT) is a highly sensitive vacuum tube that detects and amplifies low levels of light. It is widely used in various applications where high sensitivity, fast response times,...
photonic crystal surface-emitting laser
A photonic crystal surface-emitting laser (PCSEL) refers to a type of laser diode that emits light from its surface rather than from the edges. Photonic crystals are periodic nanostructures that...
quantum dot thin films
Quantum dot thin films refer to thin layers or coatings composed of quantum dots deposited onto a substrate surface. Quantum dots are nanoscale semiconductor particles typically ranging from a few to...
reflection x-ray microscopy
A means of high resolution study through the application of soft and hard x-rays onto a sample surface in order to obtain image information from 1-10 nm layers and surfaces. The x-ray source emission...
scanning electron microscopy
Scanning electron microscopy (SEM) is an advanced imaging technique used in microscopy to obtain high-resolution, three-dimensional images of the surfaces of solid specimens. SEM achieves this by...
secondary emission photocell -> photomultiplier tube
A photomultiplier tube (PMT) is a highly sensitive vacuum tube that detects and amplifies low levels of light. It is widely used in various applications where high sensitivity, fast response times,...
spaser
A spaser (surface plasmon amplification by stimulated emission of radiation) is a nanoscale device that generates coherent optical radiation at nanometer-scale dimensions. It is analogous to a laser...
thermal detector -> infrared detector
An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...
thermography
Thermography is a technique that involves the use of an infrared imaging device, called a thermal camera or infrared camera, to detect and visualize the infrared radiation emitted by objects. This...
thermophotovoltaic
Thermophotovoltaic (TPV) refers to a technology that converts heat energy into electricity using the principles of thermophotovoltaics. In a thermophotovoltaic system, thermal radiation from a heat...
threshold wavelength
The greatest wavelength of radiation for a specified surface for the emission of electrons.
ultraviolet coatings
Ultraviolet (UV) coatings are specialized optical coatings designed to operate in the ultraviolet region of the electromagnetic spectrum, typically ranging from 10 nm to 400 nm. These coatings are...
VCSEL -> vertical-cavity surface-emitting laser
A vertical-cavity surface-emitting laser (VCSEL) is a type of semiconductor laser diode that emits light vertically from the surface of a semiconductor wafer. VCSELs are commonly used in various...
vertical-cavity laser diode -> vertical-cavity surface-emitting laser
A vertical-cavity surface-emitting laser (VCSEL) is a type of semiconductor laser diode that emits light vertically from the surface of a semiconductor wafer. VCSELs are commonly used in various...
vertical-cavity surface-emitting laser
A vertical-cavity surface-emitting laser (VCSEL) is a type of semiconductor laser diode that emits light vertically from the surface of a semiconductor wafer. VCSELs are commonly used in various...
volumetric imaging
Volumetric imaging refers to the capture, visualization, and analysis of three-dimensional (3D) information from a volume of space. Unlike traditional two-dimensional (2D) imaging, which provides...
Photonics DictionaryDefinitions

Marketplace Help Need Help?
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.