Definitions

The modulated transfer function (MTF) is a measure used in optical engineering and imaging science to describe the ability of an optical system to transfer the contrast of an object to an image. It...

A method used to detect internal or residual microstresses in a material by using a laser beam to locate changes in polarization caused by the stress.

A zone plate produced by a computer and having a binary structure that can be etched into a chromium or quartz layer. It often is used in laser machining, in which the machining of small holes with...

In general, changes in one oscillation signal caused by another, such as amplitude or frequency modulation in radio which can be done mechanically or intrinsically with another signal. In optics the...

The highest frequency at which a laser diode can be driven and still be modulated acceptably that further results in the maximum rate of change (modulation) in output frequency that can be obtained...

Rate at which optical radiation or a signal is varied through the use of a mechanical or electronic chopper. Also called chopping frequency.

A method of spectral analysis in which some property of the sample is varied and the corresponding change is measured. The change is induced by a repetitive perturbation such as an electric field,...

MTF analysis/measurement equipment refers to instruments and tools used to measure and analyze the modulation transfer function (MTF) of optical systems. The MTF is a quantitative measure of the...

Also called sine wave response and contrast transfer function. The modulation transfer function is the ratio of the modulation in the image to the modulation in the object as a function of frequency...

A modulator is a device or component that modifies a carrier signal in order to encode information for transmission over a communication channel. The process of modulating involves varying one or...

A nonlinear crystal used to modulate a polarized beam of light by means of the Pockels effect. A Pockels cell is used as a voltage-controlled waveplate by means of applying a known voltage across the...

Material hardness scale that is used to characterize the scratch resistance of various materials. This surface hardness evaluation is determined by scratching the surface to be tested with 10...

An optical interference technique widely utilized as a method of nondestructive testing when determining the ray deflection and the modulation transfer function (MTF) of an optical system associated...

The resulting interference pattern generated from moiré deflectometry, the moiré pattern is a pattern developed from interference or light blocking, when gratings, screens or regularly...

Contour mapping technique that involves positioning a grating close to an object and observing its shadow on the object through the grating. The resultant moiré fringes correspond to a contour line...

A blank whose basic surface curves are attained by heating and forming a given weight of raw glass; a rough glass blank resembling the finished lens in size and shape. After molding, a precision lens...

A molded lens is an optical lens manufactured using a molding process, typically involving the shaping of a material, such as glass or plastic, into the desired lens shape. This process involves...

A method of predicting the nonlinear optical effects exhibited by different molecules without synthesizing the molecules themselves.

A molecular motor refers to a nano-sized device composed of organic molecules or other small-scale components that can convert light energy into mechanical motion at the molecular level. These...

Spectrum analysis concerned with the spectra formed by transitions in molecules.

Graphic evaluation of the operation of a steam thermodynamic cycle of a solar energy system on which enthalpy is plotted against entropy.

Molybdenum diselenide (MoSe2) is a dichalcogenide compound composed of molybdenum (Mo) and selenium (Se). It belongs to the family of transition metal dichalcogenides (TMDs), which have garnered...

In physics, momentum transfer is the amount of momentum transferred from one particle to another during particle collision or interaction. This phenomenon can be utilized in various areas of physics...

In a laser diode, the photocurrent produced by a photodiode that detects the emission from the rear facet of the semiconductor chip. It can be used to provide feedback control of the forward current...

Composed of one color; having only one wavelength of radiation.

A filter that transmits a single spectral line emitted by a line source.

Light consisting of a single wavelength or a very narrow band of wavelengths.

A monochromator is an optical instrument used to isolate and select a narrow range of wavelengths from a broader spectrum of light. The term monochromator is derived from "monochromatic," meaning...

Made up of a single color.

With respect to a crystal, a monoclinic crystal consists of three unequal axes, two of which intersect each other obliquely and yet still form right angles to the third.

A type of tubing used to protect optical fiber cables, consisting of a wire spiral of aluminum, galvanized steel or stainless steel, encased in a polyvinyl chloride or silicon rubber coating. These...

1. Viewed with one eye. 2. Describing an image as viewed from a single angle.

A monocyte is a type of white blood cell (leukocyte) that is part of the innate immune system. Monocytes are produced in the bone marrow and circulate in the bloodstream. They are characterized by...

Pertaining to radiation or particle emission, whereby the emission is produced with minimal energy spread.

A device that is fabricated in a single piece; A device (i.e. circuit) that is operated at a single frequency or a single class of frequencies.

An array of refractive microlenses that are round, square and hexagonal and as small as 15 µm. They are used for Hartmann testing, laser diode collimation and other applications that require...

A molecule that has the ability to chemically combine with other molecules to form a polymer, hence being capable of being polymerized. See polymer; polymerization

Process that occurs when a polymerized soft plastic rod with higher refractive index is placed in a bath of a lower refractive-index monomer to obtain plastic fibers with a nearly parabolic index...

A character generation CRT that functions on the principle of secondary emission. The target holds a set of aluminum characters, select characters being scanned by the electron beam. The secondary...

A matrix-controlled display that has no information storage at the display surface.

Simulation of radiative transfer in which each photon is generated by a source and its path through the medium is statistically simulated with absorption and scattering probabilities as well as with...

A set of algorithms used to study the structural and spatial characteristics of objects in a digitized image for applications including feature extraction and image segmentation in machine vision and...

In image processing, the study of structure or form of objects in an image.

One surface of a nonconducting plate that is coated with many minute particles of photoemissive material that are insulated from one another.

A group of photosensors arranged in a grid-like pattern covering the entire field of view, enabling them to record it all at once (as a camera records an image on film) rather than by scanning parts...

A large telescope mirror fabricated from several smaller sections.

In a crystal, its subdivision into polyhedral blocks of macroscopic sizes, with discontinuities contained in the lattice formation between them.