Search
Menu
Zurich Instruments AG - Challenge Us 10/24 LB

Single-Frequency Laser Supports Smaller Optical Systems

Facebook X LinkedIn Email
To overcome the challenges of single-mode lasing with a high Q factor, researchers from Shanghai Institute of Optics and Fine Mechanics and collaborators demonstrated a single-frequency ultranarrow linewidth erbium-doped lithium niobate (LN) microdisk laser. The team achieved this through simultaneous excitation of high-Q polygon modes at both pump and laser wavelengths. To enable applications ranging from lidar to metrology, on-chip microlasers must be operational at ultranarrow linewidths and high wavelength tunability. A high Q factor is used to achieve this. According to the...Read full article

Related content from Photonics Media



    Articles


    Products


    Photonics Handbook Articles


    White Papers


    Webinars


    Photonics Dictionary Terms


    Media


    Photonics Buyers' Guide Categories


    Companies
    Published: August 2022
    Glossary
    lithium niobate
    A crystalline ferroelectric material used primarily as a substrate and an active medium for thin-film optical modulators and switches. It possesses very high electro-optic and piezoelectric coefficients. LiNbO3.
    semiconductor
    A semiconductor is a type of material that has electrical conductivity between that of a conductor and an insulator. In other words, semiconductors have properties that are intermediate between metals (good conductors of electricity) and insulators (poor conductors of electricity). The conductivity of a semiconductor can be controlled and modified by factors such as temperature, impurities, or an applied electric field. The most common semiconductors are crystalline solids, and they are...
    photolithography
    Photolithography is a key process in the manufacturing of semiconductor devices, integrated circuits, and microelectromechanical systems (MEMS). It is a photomechanical process used to transfer geometric patterns from a photomask or reticle to a photosensitive chemical photoresist on a substrate, typically a silicon wafer. The basic steps of photolithography include: Cleaning the substrate: The substrate, often a silicon wafer, is cleaned to remove any contaminants from its surface. ...
    Research & TechnologyLasersnarrow linewidthq factorwhispering galleryMaterialslithium niobatesemiconductormicrodiskmicrolaserpolygon modephotolithographyPLACEShanghai Institute of Optics and Fine MechanicsEast China Normal UniversityUniversity of VictoriaZhejiang UniversityZhejiang LabAsia-PacificAmericasoptoacousticsTechnology News

    We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.