Physik Instrumente Buys Electronics Firm

NASA’s Lunar Flashlight has communicated with mission controllers and confirmed it is healthy after launching Dec. 11 from Cape Canaveral Space Force Station. The satellite embarked on a...

Physik Instrumente (PI) has established an “innovation hub” in Karlsruhe, Germany, as the company looks to intensify its cooperation with leading universities and research institutions....

Physik Instrumente (PI) appointed Laurent Melin senior vice president of global sales. Melin, who previously served as director of sales EMEA for the company, succeeds chief sales officer Stephane...

Automation technology company SICK and machine vision company MVTec Software GmbH fortified an existing collaboration, signing an agreement that aims to increase the level of integration of MVTec...

The P-616 from PI is an XYZ piezo nanopositioning stage based on a parallel-kinetic design for applications such as fiber optics alignment, microscopy, 3D imaging, and semiconductor metrology, among...

Custom air bearing motion systems from Physik Instrumente LP are designed to enhance performance in various industrial applications such as photonics, medical design, aerospace, and semiconductors....

The PIglide A-123 family of wide-body, high-accuracy linear stages from Physik Instrumente LP are low-profile precision positioning stages equipped with preloaded air bearings and integrated linear...

The FiberEdge® GN1816 and GN1848 from Semtech are linear transimpedance amplifiers and laser drivers, respectively, for short reach 400 g and 800 g data center applications. The GN1816 is a 56...

To Isaac Newton the problem was clear, and in 1704 he realized the effects of atmospheric turbulence on image formation. Just as heat waves shimmering above a hot patch of ground can distort our...

In the three decades since its introduction, the CO2 laser has become the workhorse of industrial lasers. Today it is available in a range of designs and sizes with output powers of 20 kW and more....

Illumination design has developed rapidly to include not only automotive headlamps and street lamps, but also backlit displays, fluorescent panel lighting, light-emitting diode or laser sources, and...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

Laser modules play a critical role in many processes, and selecting the right laser module is essential to optimize system performance. Applications will vary widely in their requirements and the key...

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

This webinar will present the latest advancements in precision motion control techniques, system architecture, software, algorithms, hardware, and mechanisms for system designers in the laser...

Alignment time is the largest contributor to the cost of silicon photonics and optical assemblies. New industrial automation technology dramatically shortens the time required to optimally align...

PART 1: Hexapods are 6-axis parallel-kinematic machines often employed to solve complex multi-axis precision positioning and motion applications in fields such as photonics, optics, metrology,...

Over the last decade, material processing using ultrafast laser pulses with pulse durations in the range between 300 fs and about 15 ps has gained in popularity due to the small heat-affected zone...

GigE, short for gigabit Ethernet, refers to a standard for high-speed Ethernet communication, capable of transmitting data at rates of up to 1 gigabit per second (Gbps), or 1000 megabits per second...

A flowmeter is a device used to measure the flow rate or quantity of a fluid passing through a particular point in a system. It works by sensing the velocity of the fluid passing through it and...

The nondestructive analysis and recording of industrial components based on the absorption of relatively low-energy neutrons by material having low atomic numbers. The visible image formed by the...

In chemistry, a halide refers to a chemical compound containing one or more halogen atoms bonded to another element. The halogens are a group of elements in the periodic table that includes fluorine...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Lambda Research Optics, Inc. is a leading manufacturer of laser optics with high power thin-film coatings and high precision fabrications. Lambda serves a wide range of industries, such as Biotech,...