Olympus NDT

The terahertz portion of the electromagnetic spectrum refers to the frequencies between ~100 GHz and ~10 THz. This corresponds to wavelengths between 3 mm and 30 µm. Lying between the...

Jenoptik has completed its new site on Gross-Berliner Damm in Berlin. In the new production facilities and state-of-the-art environment, more than 100 employees will develop and manufacture optical...

Many photonics systems and methods require projecting lasers over an area of interest so that the reflected light can be sensed and interpreted. Among the most prominent examples are in the realms of...

The University of Twente opened its BioImaging Centre, which serves as the core facility for microscopy at the university’s Technical Medical Centre. The facility is equipped with confocal...

The Zebra FS42, Aurora™ Software Suite, 3S40, and 3S80 from Zebra Technologies Corporation are industrial automation solutions for manufacturers. The Zebra FS42 is a fixed industrial scanner...

The LVCM-016-019-01M and the LVCM-016-019-01 from Moticont are metric and imperial, respectively, linear brushless voice coil servo motors that can be used in applications such as assembly, testing,...

The Moose Series from 3DMakerPro are portable 3D scanners that use AI visual tracking. Using mark-free scanning, the scanners capture data at a depth of 100 mm, allowing for the measuring of complex...

The NavVis MLX from NavVis is a handheld laser scanning tool for industrial applications. The scanner captures point cloud data with a 32-layer lidar sensor along with 270° and 360° panoramic...

An interferometer is an instrument that compares the position or surface structure of two objects. The basic two-beam division of amplitude interferometer components consists of a light source, a...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

The use of precision polymer optics is becoming an increasing necessity today as products demand sophisticated light handling components to achieve desired results. Polymer optics can be thought of...

Since their invention in the late 1960s, charge-coupled devices, also called CCDs, have found widespread use in imaging applications. Electronic cameras based on CCD technology are used in...

Raman spectroscopy is a powerful non-invasive, non-contact tool capable of identifying molecular constituents of samples. Wavelength selective optical filters are used to block the dominant Rayleigh...

This white paper will identify the specifications that can influence the scanner’s field of view and also highlight hardware and controller-oriented solutions for improving it. Key topics include:...

Explore Lumispot Tech's advanced remote sensing mapping laser solutions, enhancing geospatial technology and insights. Delve into our capabilities in satellite imagery, aerial mapping, and spatial...

In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market faster. Developing...

Portable and hand-held spectrometers have matured, and in the past few years hand-held devices targeted to the general consumer market have been introduced. This webinar will survey the portable...

Depth or 3D imaging refers to image sensors that measure the distance between the camera and the target object on a pixel-by-pixel basis. While commercial depth cameras come in many shapes and sizes...

Microspectroscopy is the practice of performing various spectroscopies with sampling at the microscale and below. The standard microscope from any of the major microscope manufacturers presents a...

IoT (Internet of Things) applications require smart sensors with dedicated on-board functionalities. To address this prerequisite, component manufacturers are rolling out new sensor designs to...

Noncontact inspection systems are advanced measurement and inspection technologies that evaluate the properties and dimensions of an object without physically touching it. These systems use various...

3D scanners are devices used to capture the three-dimensional shape and characteristics of physical objects or environments. They utilize various technologies to gather data about the geometry,...

A nondestructive testing method for very large scale integration circuits, using a scanning electron microscope to monitor changes in the electronic state of the chip as it is fed test voltages while...

The application of coherent wavefront techniques to the determination of the physical state of a system without appreciably altering that state.

MoviTHERM Composite-Check is a turnkey Infrared Non-Destructive Test System for detecting defects in composite materials. Typical defects are voids, delaminations, disbands, foreign material and...

MoviTHERM's Solar-CHECK solution uses lockin thermography to inspect for electrical shunts and other defects in thin-film as well as in thick-film photo-voltaic cells. The cells can either be excited...

MoviTHERM's Semi-CHECK solutions allow the detection of shorts and other defects in semiconductors. This system uses a FLIR Thermal camera with microscopic lens attachment in order to provide the...

MoviTHERM Lockin Thermography Non-Destructive Test System. This system is a Lockin Thermography System used for defect detection in materials, such as composites, metals, and non-metals. Lockin...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Founded in 1971, Edinburgh Instruments Ltd. is a global provider of sophisticated, state-of-the-art analytical instrumentation for optical spectroscopy. We design and manufacture a range of...

We are a manufacturer of Diffraction Limited Fiber Coupled Laser Systems, Optical Systems, and Fiber Optic Systems from 240 nm to 6000 nm. Unique products include various sizes of Fiber Collimators,...

LaserPoint manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy. They developed the hard coatings to absorb the laser radiation which...