Nippon Sheet Glass Allies with Optical Zonu

INDUS Holding AG has acquired robotics technology company Gestalt Robotics. The company joins INDUS’ engineering segment. Gestalt Robotics is a developer of automation technologies for...

FRAMOS, a provider of embedded vision technology, has completed its new campus building in Cakovec, Croatia. The new facility will increase the company’s production capacity and bring R&D...

Collaborators on the EU-funded LAMpAS project have developed what they report to be the first laser system based on interference patterning combined with a polygon scanner system for high-throughput,...

Researchers from the Fraunhofer Institute for Material and Beam Technology IWS (Fraunhofer IWS) have established a spinoff company to commercialize a measuring system developed at the institute....

The ILX-LR1 from Sony is an interchangeable lens camera designed for industrial use with approximately 61 megapixels 35 mm full-frame image sensor made for inspection, investigation, surveying, and...

PhaseStudio from Phasics is a wavefront measurement software for metrology. With optimized algorithms, the software runs at above average speeds and uses a suite of automated tools to minimize manual...

The A-523 from PI is a Z-tip-tilt stage designed for alignment applications in optics, semiconductors, precision assembly, and photonics. The stage uses a parallel-kinematics, integrated design with...

The Microlux Powders from Meller Optics are high purity, petroleum-free alumina abrasive powders for use with all hard and soft optical materials. The powders come in seven particle sizes from 0.05...

As bit rates increase to meet expanding demand, systems have become increasingly sensitive to polarization-related impairments. These include polarization mode dispersion (PMD) in optical fibers,...

Neodymium-doped crystals and glasses such as Nd:YAG (neodymium:yttrium aluminum garnet) have long been used as laser gain materials. Optically pumped, they produce an output wavelength close to 1...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

What are thin-film coatings? The purpose of any optical thin-film coating is to modify the transmittance and reflectance properties of the substrate material to which they are applied. Most coatings...

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

Telecentric F-theta lenses with large scan fields set new standards for cutting displays.

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

Machine vision provides imaging-based automatic inspection and analysis for many modern industrial applications. This webinar will give you a general overview of machine vision system design...

Optical design concepts used to be “simple.” Designers either ran ray tracing for macroscopic optics or simulated very small domains rigorously. With the arrival of micro- and...

Optical fibers made of fused silica have many applications, including communications, manufacturing, medical care and diagnostics, and research. These applications are as varied as the requirements...

Optical coating is a challenge for even the most well-established optical fabricators and custom coating providers. The field of optical coatings continues to evolve at a rapid pace along with the...

GigE, short for gigabit Ethernet, refers to a standard for high-speed Ethernet communication, capable of transmitting data at rates of up to 1 gigabit per second (Gbps), or 1000 megabits per second...

Microelectromechanical systems, or MEMS, refer to miniature devices or systems that integrate mechanical and electrical components at a microscale. These systems combine elements such as sensors,...

A scanning electron microscope (SEM) is a powerful imaging instrument used in scientific research, materials characterization, and various industrial applications. Unlike traditional optical...

In situ, from Latin meaning "in place," refers to a method or approach where measurements, observations, or experiments are conducted directly at the location of interest or within the natural...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

With offices in Germany and the US, XIMEA develops and manufactures scientific and industrial cameras with CCD, CMOS, and sCMOS that utilize USB, and PCI Express (PCIe) interfaces. Applications...