Infinite Group and Cutting Edge Optronics Form Alliance

A team at Nanyang Technological University (NTU) developed an electrically pumped, topological, bulk quantum cascade laser (QCL) that operates in the terahertz (THz) frequency range. The THz QCL is...

Co-packaged optics for high performance computing and other data center applications require dense integration of silicon PICs with electronic integrated circuits (EICs). Stacking an electronic chip...

Organic-based optoelectronics have the potential to provide an energy-efficient way to operate low-power indoor devices and wireless IoT sensors. Organic photovoltaic cells (OPVs) and organic...

Optical frequency combs have been transformational for metrology, spectroscopy, atomic clocks, and other applications, but their utility outside of lab and industrial settings has yet to be realized...

The TSLink from TeraSignal is an intelligent chip-to-module (C2M) interconnect for data transmission between large ASICs and linear optical modules. The interconnect can interface with existing ASICs...

The SFT-40 series from Luminus Devices are high power warm white LEDs for applications including stadium, architectural, studio, stage, indoor directional, and surgical lighting. The LEDs utilize...

The Dove 850 from Credo is a 800G digital signal processor (DSP) integrated circuit (IC) that is optimized for linear receive optics (LRO). A unidirectional 8 × 112 Gb/s DSP purpose built for...

The octal channel Seagull 452, quad channel Seagull 252, and dual channel Seagull 152 from Credo are optical digital signal processors with integrated VCSEL, EML, and SiPho drivers. The Seagull 452...

Ultraprecision machining can be defined in general terms as the removal of material from a substrate utilizing a machine tool that operates at a resolution of 10 nm (0.4 μin.) or less. The...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

There are three fundamentally different dispersive phenomena in optical fiber, of which polarization mode dispersion (PMD) is the most complex. In digital multimode fiber systems, a light pulse...

The common polycrystalline materials used for optical thin-film materials do not satisfy the requirements of telecommunications because of the instabilities caused by moisture absorption in their...

Telecentric F-theta lenses with large scan fields set new standards for cutting displays.

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Beam profilers are critical tools for characterizing lasers and light sources, whether the goal is to gain fundamental knowledge during research and development, to set important design parameters...

Dual-comb ranging (DCR) is a powerful optical metrology technique capable of absolute distance measurements at high-precisions and rapid update rates. Unfortunately, data analysis usually requires...

This webinar, presented by OFS, will provide an overview of current in vivo medical procedures performed using lasers and optical fibers. The presentation will begin with a brief history of...

An interferometer is a scientific instrument that utilizes the principle of interference to measure differences in the path length, wavelength, phase, or amplitude of coherent electromagnetic waves....

Optical fiber is a thin, flexible, transparent strand or filament made of glass or plastic used for transmitting light signals over long distances with minimal loss of signal quality. It serves as a...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A beamsplitter is an optical device used to divide a beam of light into two or more separate beams, typically by reflecting a portion of the incident light while transmitting the remainder....

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

In optics and photolithography, a phase mask refers to a device that modifies the phase of light waves passing through it. The phase mask is used to control the spatial distribution of the light's...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

IPG Photonics is the world's leading provider of high power fiber lasers and fiber amplifiers that are revolutionizing performance and utility in a remarkable array of materials processing,...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

We are a manufacturer of Diffraction Limited Fiber Coupled Laser Systems, Optical Systems, and Fiber Optic Systems from 240 nm to 6000 nm. Unique products include various sizes of Fiber Collimators,...