House Republicans Offer High-Tech Agenda

San Francisco-based piece-picking solutions provider OSARO has integrated Cognex DataMan image-based barcode readers into its robotic bagging system. The integration is part of a collaboration...

Ultrafast optical imaging is typically measured in picoseconds, whereas high-speed electronic cameras image at the millisecond and microsecond timescale. To bridge the gap between these technologies,...

Aerospace and automotive manufacturers initially adopted additive manufacturing (AM) methods as a means to rapidly prototype new parts or to fabricate more complex or consolidated components in a...

Femtosecond (fs) fiber oscillators are a standard technology used to generate fs laser pulses. They offer a compact design, outstanding performance, and are cost-effective to use. However, the...

2Pi Optics’ high-resolution fisheye sensor based on optical metalens technology is made for designers who need miniature cameras for use in advanced driver-assistance systems, AR/VR, UAVs,...

The IQ Lens™ System from Theia Technologies is a vision system including a motorized lens, motor control board, average calibration data, and software with graphical interface (GUI). The IQ...

The SX-25 thermal paste from SigmaOx is a thermal interface material meant for use with high-speed chipsets and graphic processors. Formulated as a hybrid phase change material without diluents or...

The OSLON® UV 3535 from ams OSRAM is a UV-C LED designed for mercury-free and efficient UV-C disinfection and treatment solutions. Utilizing flip-chip generation in an open 3535 ceramic package,...

By its original definition, a nanopositioning device is a mechanism capable of repeatedly delivering motion in increments as small as one nanometer. Lately demands from industry and research have...

The optical materials selected for an optical system depend upon the application, the required system performance and the environment in which the system is to perform; thus the materials’...

An optical coating engineer is frequently confronted with a difficult specification for a coating. Often the difficulty in the specification results from the particular form of the optical system. If...

With a specific gravity of 1.85 g/cm3, beryllium is the lightest metal that is workable. It is 45 percent lighter than aluminum and approximately five times as stiff. Its stiffness to weight ratio...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

The ILMS is designed for profiling focused, high-power industrial lasers. This system combines reimaging/magnification optics, a polarization preserving beam sampler, and a DataRay beam profiler to...

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

MKS Newport spectral optics product overview providing a summary of competencies in diffraction gratings, optical filters, optical mirrors, OptoFlash multichannel spectrometer engines, and design &...

Enterprise-level manufacturing customers looking to leverage the power of deep learning and artificial intelligence software to solve their quality inspection applications have unique needs. Large...

Machine vision provides imaging-based automatic inspection and analysis for many modern industrial applications. This webinar will give you a general overview of machine vision system design...

The most common optical thin-film coating produced today (and for more than 80 years!) is the antireflection (AR) coating. This webinar will present the concepts and design principles of AR coatings,...

A vision of self-driving cars propels research and development for automotive lidar, vital hardware providing distance and velocity information about car surroundings. Among several lidar...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

Cutting laser systems are advanced machines that use focused laser beams to cut, engrave, or mark materials with high precision. These systems are widely used in various industries due to their...

Fiber optic bundles consist of multiple optical fibers grouped together within a common protective sheath or coating. These bundles are used to transmit light from one point to another, often for...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

An alexandrite laser is a solid-state laser that utilizes a synthetic crystal made from the rare earth element alexandrite (BeAl2O4:Cr3+). This crystal is capable of emitting laser light in the...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Mega Speed Corporation, founded in 2001 by Canadian Photonic Labs, leads in high-speed imaging technology. We design, manufacture, and market advanced high-speed video cameras, digital video...