1,2,3,4 & 5….. Q-Switched Nd:YAG Laser At 213 nm

Laser microprocessing covers a broad scope of laser processes used in the machining of ultrafine structures. In this area of technology, micrometer-scale levels of precision and accuracy are required...

Lasers provide many different industries with greater efficiency, less waste, and higher precision, but they are not always as easy to fix as the machines they replace. A blunted drill bit is easier...

Luxolis, a 3D machine vision startup, plans to open an R&D center in Chuncheon, South Korea. The facility will serve as a hub for advanced R&D for Luxolis' capabilities in AI-driven 3D vision...

The metropolitan areas of Orlando and Tampa, Fla., experienced the fourth and fifth largest annual population gains, respectively, in the U.S. in 2023, according to the U.S. Census Bureau. Charles...

Z-Trak™ LP2C 3D profile sensors from Teledyne DALSA are designed for in-line 3D measurement and inspection applications. The devices deliver 4096 samples/profile and an x resolution down...

Valens Semiconductor’s USB3 industrial grade extender can enable industrial-grade USB3 cameras to be extended past the current 5-m limit to distances of up to 100 m over a category 6a cable....

The GP-CVP075P-xxVH-T02 Series from GlacialPower are constant voltage LED drivers that have an AC phase-cut dimming feature. Covering demands for LED strip, neon flex, signage, and light box markets,...

The TL 305 series of tower lights from Leuze electronic Inc. is designed for machine and system construction, as well as intralogistics. The tower lights offer bright and uniform illumination,...

In the three decades since its introduction, the CO2 laser has become the workhorse of industrial lasers. Today it is available in a range of designs and sizes with output powers of 20 kW and more....

What are thin-film coatings? The purpose of any optical thin-film coating is to modify the transmittance and reflectance properties of the substrate material to which they are applied. Most coatings...

Since their invention in the late 1960s, charge-coupled devices, also called CCDs, have found widespread use in imaging applications. Electronic cameras based on CCD technology are used in...

As system and cable installers try to optimize their links, the preferred method has become high-speed DWDM. This demand for bandwidth has led to the development of new test and measurement...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

In the rapidly evolving world of industrial machine vision, hyperspectral imaging (HSI) has emerged as an invaluable tool, offering a wealth of information for various applications. This white paper...

Dynamic Beam Lasers (DBLs) are fiber lasers based on Coherent Beam Combining (CBC) whose operational properties offer a set of parameters that did not previously exist in lasers. DBLs open new...

Machine vision provides imaging-based automatic inspection and analysis for many modern industrial applications. This webinar will give you a general overview of machine vision system design...

Machine vision lighting technology must constantly evolve to meet increasing demands and advancing imaging technologies. Steve Kinney highlights the latest innovations in lighting, including dynamic...

Especially in the fields of the life sciences and medicine, Raman-based technologies have proven their great potential, and they increasingly complement established methods such as fluorescence...

Spectral repeatability refers to the consistency and reproducibility of spectral measurements across multiple trials or instances. It is a measure of how well a measurement instrument or system can...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

Marking laser systems are advanced devices that use laser beams to create permanent marks, patterns, or engravings on various materials. These systems are widely employed in industrial, commercial,...

Actinic radiation refers to electromagnetic radiation that has enough energy to induce photochemical reactions. This type of radiation is primarily in the ultraviolet (UV) range but can also include...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

A digital camera is a device that captures and records still images or video in digital format. Unlike traditional film cameras, which use photographic film to capture and store images, digital...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

IPG Photonics is the world's leading provider of high power fiber lasers and fiber amplifiers that are revolutionizing performance and utility in a remarkable array of materials processing,...