Definitions

A telescope stand equipped with a polar axis that can be set parallel to the Earth's axis of rotation and a declination axis that is at right angles to the polar axis. If the telescope is turned at a...

A telescope that is mounted on an equatorial mount.

1. A contour map of a photographic deposit consisting of lines and curves that join points of equal density. 2. The portrayal of a photograph's points of equal density in hues of yellow, cyan and...

1. The use of an electronic microdensitometer to measure points of equal density on a photographic deposit. 2. A technique that simplifies a picture's density pattern by making a single isodensity...

The length of optical waveguide needed to attain equilibrium mode distribution for a specified excitation condition.

The condition in a multimode optical waveguide in which the relative power distribution among the propagating modes is independent of length.

Colors differing only in chromaticity but not in luminance.

Calculation of the amount of energy extracted from a light beam regardless of its wide range resolution.

When a block of glass (prism, window, filter, etc.) is placed into a converging light bundle, it increases the physical distance to the point of focus. The equivalent air path for that block of glass...

In surface height measurement of optics with steep slopes, the use of two short visible wavelengths to synthesize a longer, equivalent wavelength.

An Er:YAG laser is a type of solid-state laser that uses a crystal made of erbium-doped yttrium aluminum garnet (Er:Y3Al5O12) as the gain medium. The erbium (Er) ions are introduced into the crystal...

Data or encoded information capable of being eradicated, leaving the media free for rewriting. Also called reversible.

An optical fiber that can be used to amplify an optical input. Erbium rare earth ions are added to the fiber core material as a dopant in typical levels of a few hundred parts per million. The fiber...

An image, real or virtual, whose spatial orientation is identical to that of the object. The image obtained at the retina with the assistance of an optical system is said to be erect when the...

An eyepiece combined with an erecting prism or lens system.

Lenses or prisms that serve to erect the image; i.e., to bring the image upright after it has been inverted by the objective.

A telescopic eyepiece comprising five or six simple lenses in the form of three doublets or two doublets and a singlet.

In image processing, a morphology operator in which a structuring element or probe of a particular shape is moved over the input image. Where the probe fits completely within the boundaries of a...

The addition to the information signal in communications of redundant bits that enable the originally encoded message to be decoded without degradation of the data. In compact disc technology, the...

A single number, defined by the computer program or the user that expresses the performance of an optical system. Also known as merit function and defect function, the error function comprises...

Localized redness of skin due to congestion of capillaries; a common result of overexposure to laser radiation.

An etalon is an optical device that consists of two parallel reflecting surfaces separated by a precise and known distance. It operates based on the principle of optical interference and is used to...

Etaloning is an optical phenomenon that occurs in imaging systems, particularly in devices such as spectrometers, interferometers, and cameras. It is characterized by the appearance of interference...

The engraving of a surface by acid, acid fumes or a tool; a process extensively used in the manufacture of reticles.

An acid used to etch the surfaces of particular materials. For glass, hydrofluoric acid is used either as a liquid or a vapor. Metals are etched by means of suitable acids or other liquids, often to...

A product of the area of a light beam (normal to its direction of propagation) and the solid angle that the beam includes; flux per unit radiance or luminance. Alternative terms: geometric extent,...

The material that has the lowest possible constant melting point of any possible combination of the same components.

A high-frequency approach to the propagation of light in graded-index fibers in which the modal field is represented in terms of an inhomogeneous (evanescent) plane wave with a complex phase, so that...

A sensor generally used for infrared imaging. It consists of two chambers separated by a thin, blackened membrane. An infrared image is formed on the membrane by a lens or mirror and produces...

Coating carried out in a sealed chamber evacuated by a mechanical pump in series with an oil diffusion pump to a pressure less than 10-4 mm of mercury, measured by a vacuum gauge. At such a low...

A process, either naturally occurring or mechanically induced, whereby water is changed from its liquid state into a vapor.

An event-based image sensor, also known as a dynamic vision sensor (DVS), is a type of digital imaging device designed to capture visual information in a highly efficient and unique way compared to...

In the SI system, prefix meaning 1018. (E).

A factor, F, indicating the increase in shot noise in an avalanche photodiode as compared with the ideal multiplier, which is noiseless. The noise, which results from variations in avalanche gains,...

A contraction of "excited dimer." The term refers to an excited species made by combination of two identical atoms or molecules, one of which is excited and one of which is at a ground...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

Excimer laser coronary angioplasty (ELCA) refers to a medical procedure used in the treatment of coronary artery disease. This technique involves the use of an excimer laser to perform angioplasty, a...

The term "excimer," strictly used, refers to excited species made by combination of two identical moieties, atoms or molecules. Excited complexes that do not fall into this category are...

1. The process by which an atom acquires energy sufficient to raise it to a quantum state higher than its ground state. 2. More specifically with respect to lasers, the process by which the material...

The difference between the energy of an atom in its ground state and that of the same atom in its excited (quantum) state.

The ratio of the intensities of two specified spectral lines of a source having vastly different excitation energies. This ratio indicates the level of excitation energy in the source.

The amount of energy required to raise the energy level of an atom; a necessity if the atom is to radiate energy. High excitation potential is the amount of energy in the upper state of the...

On the CIE chromaticity diagram, the distance from the achromatic point to the sample point, divided by the distance from the achromatic point through the sample point to the spectrum locus or purple...

The amount of x-rays used to penetrate and diffuse a target sample undergoing electron-probe microanalysis.

The stationary state of an ion, atom or molecule, above the ground state that is produced by the interaction with the radiation field or another ion, atom or molecule. See ground state.

In laser pumping, parasitic absorption that occurs at certain wavelengths, decreasing pump efficiency and gain.

In ultraviolet and fluorescence photography, the term applied to the filter used in the photographic system and with the exciting source to screen out ambient radiations and to transmit the exciting...

A small incandescent lamp whose intense beam is focused on the optical soundtrack of a motion picture film. The soundtrack modulates the beam, which in turn is detected by a photocell that produces...

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...