Photonics Dictionary

In the SI system, prefix meaning 1018. (E).

A factor, F, indicating the increase in shot noise in an avalanche photodiode as compared with the ideal multiplier, which is noiseless. The noise, which results from variations in avalanche gains,...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

Excimer laser coronary angioplasty (ELCA) refers to a medical procedure used in the treatment of coronary artery disease. This technique involves the use of an excimer laser to perform angioplasty, a...

1. The process by which an atom acquires energy sufficient to raise it to a quantum state higher than its ground state. 2. More specifically with respect to lasers, the process by which the material...

In laser pumping, parasitic absorption that occurs at certain wavelengths, decreasing pump efficiency and gain.

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...

Flux leaving a surface per unit area.

In cosmology, a star that exhibits a rapid increase in the magnitude of light, which is followed by a slow decrease in magnitude. The nova and supernova are explosive variables.

In optics, the total radiant energy incident on a surface-per-unit area. It is equal to the integral over time of the radiant flux density. Also known as radiant exposure.

A ray that has a nonisotropic speed in a doubly refracting crystal. It does not necessarily obey Snell's law upon refraction at the crystal surface.

Extreme ultraviolet (EUV) refers to a specific range of electromagnetic radiation in the ultraviolet part of the spectrum. EUV radiation has wavelengths between 10 and 124 nanometers, which...

A photodetector composed of a semiconductor material whose responsive properties can be altered by the addition of impurities to the basic material. Copper- and mercury-doped germanium are both...

The organ of vision or light sensitivity.

Also termed eye distance. The distance between the vertex of the last optical surface of a visual optical system and the system's exit pupil.

Instruments used by ophthalmologists and optometrists to study the eye. There are, for instance, the ophthalmoscope to observe and photograph the retina; the retinoscope and optometer to determine...

An optical device used to monitor movement of the human eye.

Wavelengths between 400 and 1400 nm (VIS to NIR) are focused onto the retina by the cornea. Because the retina is sensitive to light, these wavelengths can be damaging even at low energies. It is the...

Also known as ocular. The lens system used between the final real image in a visual optical system and eye. It acts as an image magnifier. Many types of eyepieces are known; e.g., the Huygens used in...

An f-theta lens, also known as an f-theta scan lens or simply an f-theta lens system, is a specialized optical component used in laser scanning systems, particularly in laser marking, engraving, and...

A multiple-beam interferometer, usually consisting of two flat plates, with high reflective ability. The plates are set parallel to one another by spacers so that lightwaves may bounce back and forth...

A means of determining a prism's index of refraction by placing the prism so that its emergent face is perpendicular to the incident beam. This arrangement permits the determination of the prism's...

With respect to a unit cell in a crystal structure, the property defining an atom located at the center of each face.

The reproduction of a picture or image, produced by scanning the image and converting it into electrical signals that carry the image to be reproduced. Also known as fax.

In imaging technology, assigning color to black and white images to differentiate features or convey information. Also called colorizing.

A set of rays through a lens originating at a common point and contained in one plane.

The diffraction pattern of a source such as a light-emitting diode, injection laser diode or the output end of an optical waveguide observed at an infinite distance from the source.

A region far from an aperture or source where the diffraction pattern is essentially the same as that at infinity. Changes in diffraction patterns of points within the far-field region are...

A laser with output over a wide range of wavelengths spanning the far-infrared region of the spectrum (30 to 1000 µm); typically, it consists of a metal or dielectric waveguide one to two...

The Faraday effect, named after the English scientist Michael Faraday, is a phenomenon in physics where the polarization plane of light is rotated when the light passes through a transparent medium...

The fiber optic connector standard for Nippon Telephone & Telegraph (NTT) installations, developed with Nippon Electric Co. (NEC).

In image processing and machine vision, the process in which an initial measurement pattern or some subsequence of measurement patterns is transformed to a new pattern feature. In image pattern...

A circuit that permits feedback in an electronic device.

A system designed to control the output quantity of a device by returning a portion of its output signal to its input. This results in the manipulation of the input quantity so that the desired...

The signal-to-noise ratio (SNR) obtained with a Fourier transform spectrometer when detector noise prevails, which exceeds the SNR of a scanning spectrometer in the same time by a factor proportional...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

The Fermi liquid state refers to a specific state of matter in quantum mechanics, particularly describing the behavior of interacting fermions (particles with half-integer spin, such as electrons) at...

The region of a ferroelectric crystal where spontaneous polarization is uniformly directed.

Ferroelectric materials are a type of dielectric materials that exhibit spontaneous electric polarization, meaning they possess a permanent electric dipole moment even in the absence of an external...

The properties of certain materials that cause them to have relative permeabilities that exceed unity. This permeability permits the materials to exhibit hysteresis.

A mechanical fixture, generally a rigid tube, used to confine the stripped end of a fiber or a fiber bundle.