Scantinel Photonics Appoints Michael Richter Commercial Managing Director

Lidar developer Hesai Technology collaborated with NVIDIA to integrate Hesai’s AT128 automotive-grade, ultrahigh-resolution long-range lidar into the NVIDIA DRIVE and NVIDIA Omniverse...

Embedded technology company Vecow and German technology company Solectrix have partnered to develop a plug-and-play AI-based rapid imaging prototyping system. The system aims to provide imaging...

Ford Motor Co. has established Latitude AI, a wholly owned subsidiary focused on developing a hands-free, eyes-off-the-road automated driving system. The formation of the company comes as Ford...

3D lidar developer Outsight has added David Wurtz as regional director of sales for aviation in the North American market. Wurtz has a background in both market knowledge and manufacturing, most...

The ZEISS ABIS III is designed for reliable and early inspection of the entire component surface, within cycle time. The combination of projector, cameras, lighting, and the new software ZEISS ABIS...

The Axiovert 5 cell imaging system from ZEISS uses artificial intelligence and automatic functions to ease daily work in the cell lab. From scientific routine and basic research to phase...

The portfolio of metalens-based transmit-optics from NIL Technology includes two-in-one dot projectors, diffusers, polarization-sensitive optics, and application-specific solutions. All have a single...

The ZEISS T-SCAN hawk 2 handheld 3D laser scanner from Zeiss is a portable, reliable tool to capture data with metrology-grade precision in quality control or reverse engineering, maintenance,...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

If we were to estimate the output of a CCD or thermal camera, we would typically draw an image over the detectors, aligning the image with the detector axes. We show it this way because it’s...

There are three fundamental properties of light: intensity, wavelength, and polarization. Almost all cameras today are designed for monochrome or color imaging. A monochrome camera is used to measure...

Developed in the early 1990s, the silicon photomultiplier (SiPM) is a solid-state photodetector whose sensitivity to light rivals that of a photomultiplier tube (PMT) in a regime where a few hundred...

This white paper compares current sensing technologies for automotive applications. It outlines the challenges faced by LiDAR, Radar, Sonar, and traditional HDR cameras, and addresses the benefits of...

The ability to combine more than one spectral band into a single optical filter can enable flexibility of system design and reduce the number of components and the costs needed to achieve a desired...

Chroma Technology produces machine vision, thin-film interference filters with extremely durable sputtered coatings in various form factors and sizes that work in a wide range of applications....

With the rapid advances in multispectral cameras and lighting, the range of applications continues to expand. As the camera technology improves, multispectral lighting becomes even more important in...

Building a great lidar system requires a great laser. In this webinar, the presenters discuss the five most important criteria for choosing the right laser for your lidar systems, which are...

Distributed feedback (DFB) laser diodes are single-frequency laser sources that can be produced in volume at a low cost. They represent compact and reliable laser technology and are widely used in...

A vision of self-driving cars propels research and development for automotive lidar, vital hardware providing distance and velocity information about car surroundings. Among several lidar...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

FMCW lidar stands for frequency-modulated continuous wave lidar. It is a type of lidar (light detection and ranging) technology used for remote sensing, distance measurement, and 3D mapping. FMCW...

A phase-modulated sensor is a type of sensor that uses modulation of the phase of a signal to measure changes in a physical quantity. In such sensors, variations in the phase of the signal are...

Robotic vision systems, also known as machine vision systems when integrated with robots, are technologies that enable robots to perceive and interact with their environment using visual data. These...

A machine vision system is an integrated combination of hardware and software components designed to capture, process, and analyze images to perform automated inspection, measurement, and quality...

It's a VISION takeover on Photonics Spectra Now! We're bringing you the latest from VISION 2024 in Stuttgart, Germany while the event is still happening. Machine vision takes center stage as we...

Newsight’s enhanced Time-of-Flight (eTOF™) solid-state LiDAR is a complete solution for a versatile and affordable 3D mapping device, using Newsight’s patented eTOF™ technology for improved...

Discover how Emergent Vision Technologies is advancing high-speed, high-resolution imaging at VISION 2024 with innovative camera solutions, transforming applications in automation, AI, and more. New...

Focuslight is developing product platforms and photonics solutions for LiDAR, DMS, and other emerging automotive applications. Focuslight was awarded with volume supply contract with an automotive...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

A digital camera is a device that captures and records still images or video in digital format. Unlike traditional film cameras, which use photographic film to capture and store images, digital...

A machine vision system is an integrated combination of hardware and software components designed to capture, process, and analyze images to perform automated inspection, measurement, and quality...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

ISO 9001 & ISO 13485 certified and D&B DUNS # 113515303 Shanghai Optics is an unparalleled custom system solution provider offering advance precision custom optical design, engineering,...

Cameras from The Imaging Source are used in many areas of everyday life: in science, industry, medicine, office, traffic engineering, the food industry, the pharmaceutical industry and the media...

For over 30 years, Allied Vision has helped people see the bigger picture to achieve their goals. We believe knowledge is power and always strive to deliver valuable insight with our technology...