Plessey, PhytoLux Sign Horticultural Lighting Agreement

Medical technology company iThera Medical closed a £13 million ($15.6 million) funding round led by TRUMPF Venture. The funding will drive the company’s commercialization and development...

Light-scattering nano-elements, also known as nanoantennas due to their ability to harness light, are used as an optical control technology in nanophotonics. In combination with a phosphor plate, and...

TKH Vision has opened the TKH Vision Solution Center in Konstanz, Germany. The center, located at the Chromasens headquarters, will serve as a demonstration and experience center for TKH...

Silicon photonics company Salience Labs appointed Chris Porthouse chief product officer (CPO). Porthouse most recently served as CPO for Imagination Technologies, and he previously served as general...

The LumaDrive™ Pre-wired Systems series from Advanced Energy Industries are high-efficiency remote centralized drivers for large-scale horticultural, greenhouse, and industrial LED lighting...

The New Energy Light Module (NELM) from New Energy is built with CREE LEDs and is a replacement for the discontinued CREE LED LMH2s. A solution for area illumination and commercial lighting spaces,...

The ZEISS ABIS III is designed for reliable and early inspection of the entire component surface, within cycle time. The combination of projector, cameras, lighting, and the new software ZEISS ABIS...

The SFH 7018 is a red/green/IR LED package from ams OSRAM that can make photoplethysmography (PPG) measurements in smart watches, wristbands, and other wearable devices. The multi-LED package uses a...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

How to achieve high-performance 7-channel multiplex imaging, with Kromnigon’s multiband filter technology and CoolLED’s precision-controlled LED illumination.

Downstream processing refers to the recovery and purification of biosynthetic pharmaceutical products by chromatographic and filtration steps. High-Throughput Raman Spectroscopy is emerging as a...

Presenters: Professor Stephen Boppart The Future of Healthcare With Optical Biomedical Imaging A medical doctor and professor at the University of Illinois, Boppart's...

A new generation of visible laser light sources is being developed to enable advanced optical control through the use of miniature optics and reflectors, high-efficiency fiber optic transport, and...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Fluorescence imaging in life sciences and microscopy applications has traditionally used mercury, metal halide, and xenon arc lamps for illumination. With advances in technology, LEDs are now able to...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

An LED (light-emitting diode) is a semiconductor device that emits light when an electric current passes through it. LEDs are commonly used for lighting, displays, and indicators. A NanoLED is on the...

LiFi, short for light fidelity, is a wireless communication technology that utilizes visible light or infrared light to transmit data. Developed as an alternative or complementary technology to...

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a substrate, typically a printed circuit board (PCB), without the need for...

Short movie about our company including production, product portfolio, and members of our Family company.

Video definition of LED presented by Dan Courtney, Three Rivers Community College.

In this episode, we take you to the stage with a professional lighting designer who uses the latest technologies to create the ambience of theatre productions. And we take a look at just how...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Imperx delivers cutting-edge, high-performance and reliable ruggedized camera solutions for machine vision, industrial, military, aerospace, medical, life sciences, traffic monitoring, and many more...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...