Orbotech Gets Order from Unicap Electronics

Via its holding company Exaktera, private equity investment firm Union Park Capital has acquired iiM GmbH, a manufacturer of LEDs for machine vision applications. Terms of the deal were not...

Collaborating researchers from Hong Kong, China, and Germany have developed a quantum-sensing technology that encodes changes in fluorescence intensity into spikes that occur during optically...

Basler AG has acquired 25.1% of the shares in Roboception GmbH, an intelligent 3D sensor technology developer. Financial details of the transaction were not disclosed. Roboception CEO and...

A team at Nanjing University of Science and Technology drew on deep learning techniques to achieve high-resolution, high-speed 3D imaging using conventional, low-speed cameras. The new 3D imaging...

The BCM68660 (shown) and BCM55050 from Broadcom Inc. are 50 G PON optical line terminal-optical network unit (OLT-ONU) devices for the acceleration of AI and machine learning at the edge and 50 G...

The SW-4010Q-MCL prism-based line-scan camera from JAI A/S is an industrial device that provides simultaneous and separate imaging of red, green, blue, and SWIR light. Combining CMOS and InGaAs...

The Vue® TV128+ series from Teledyne FLIR is a thermal-and-visible camera payload module for use in industrial inspection applications on uncrewed aerial systems. The ITAR-free camera module...

The ATLASCAN Max and MARVELSCAN from Hexagon AB are handheld 3D scanning devices that can be used in automotive, rail, industrial equipment, and general manufacturing applications. Eliminating the...

By observing a few simple rules that govern diode lasers’ properties, driving them loses much of its mystery. Below its threshold current, a diode laser emits LED light with spontaneous...

Manufacturing the laser diode is complicated by the existence of multiple proprietary techniques and intellectual property barriers together with complex device physics and unique materials. ...

An optical coating engineer is frequently confronted with a difficult specification for a coating. Often the difficulty in the specification results from the particular form of the optical system. If...

The optical materials selected for an optical system depend upon the application, the required system performance and the environment in which the system is to perform; thus the materials’...

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

Telecentric F-theta lenses with large scan fields set new standards for cutting displays.

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

We offer custom prisms, polygons, windows, mirrors, and wedges from one source. FISBA not only has the complete production chain in-house, we can also develop entire systems built-to-spec or support...

Beam profilers are critical tools for characterizing lasers and light sources, whether the goal is to gain fundamental knowledge during research and development, to set important design parameters...

Quantum science is measuring ever-smaller gaps in time, energy, and space, bringing us closer to the fabric of reality itself. In this webinar, Félix Bussières, Ph.D., of ID Quantique...

Vision guidance technology for industrial robot arms has been around for decades. So why is this application still so difficult? 3D vision-guided robotics applications such as bin picking present...

Fiber optic sensing technology has evolved over 60 years of development and commercialization. While many applications are for point sensors, the most rapid expansion has been for distributed fiber...

A machine vision system is an integrated combination of hardware and software components designed to capture, process, and analyze images to perform automated inspection, measurement, and quality...

A laser, usually employing helium-neon or other gases as the active medium, used for alignment in industrial applications.

A vacuum chamber is a sealed enclosure from which air and other gases are removed to create a low-pressure environment, typically close to or at a complete vacuum. These chambers are often...

Laser irradiation is a process that involves the use of focused laser beams to deliver energy to specific areas for medical, industrial, or scientific purposes. The laser (light amplification by...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

A scientific CMOS (complementary metal-oxide-semiconductor) camera is a type of digital camera specifically designed for scientific imaging applications. It employs CMOS sensor technology, which...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

For over 30 years, Allied Vision has helped people see the bigger picture to achieve their goals. We believe knowledge is power and always strive to deliver valuable insight with our technology...