Netherlands Partners with New York State on Semiconductors

In cell biology and medical imaging, the targeted manipulation of cells under controlled conditions is a major challenge in understanding processes and causal relationships. Researchers are dependent...

A high-numerical aperture extreme-ultraviolet (NA EUV) lithography center is set to be built at the NanoTech Complex semiconductor research facility in Albany, N.Y. The state of New York...

Representatives from the New York Center for Research, Economic Advancement, Technology, Engineering, and Science (NY CREATES) visited the Fraunhofer Institute in Dresden, Germany to set concrete...

Wave Photonics, a developer of technologies for the adoption of integrated photonics, has secured a £4.5 million ($5.7 million) round led by the U.K. Innovation & Science Seed Fund and...

The P-545 PInano® family from PI is a piezo stage family for applications including biological imaging, semiconductor inspection, photonics testing, particle tracking, 3D imaging, and...

The F440 Smart Camera from Omron Automation enhances flexibility in machine vision applications. The device enables fully self-contained vision systems within machinery, offering ease of use...

The QSFP OCM (optical channel monitor) from PhotonPath, in collaboration with Jabil, is a pluggable optical channel monitor on a quad small form factor pluggable (QSFP) form factor created as a...

The SenS 1920 from New Imaging Technologies is a full HD resolution SWIR camera for semiconductor, wafer, and solar panel inspection and intelligence, surveillance, and reconnaissance applications....

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

Given the pace at which technology advances, there always seems to be a learning curve. With the abundance of consumer electronics available, there typically is no right or wrong way to use these...

The Image Slicer is used to slice the image into 32 identical elements and the subsequent arrangement of these into a a pseudo-long image chain. The aim was to undercut the challenging specifications...

This application note demonstrates the use of ATR-FTIR spectroscopy for the analysis of human serum albumin. An IR5 FTIR spectrometer was used, equipped with a heated ATR accessory, to help tackle...

We are pros at designing, developing, and manufacturing notch filters!

Short wave pass and long wave pass filters are a specialty of ours. Learn more...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

LASER COMPONENTS brings together some of the brightest minds in the industry for a one-hour workshop. Doctoral students from MIT, Princeton University, and Stanford University share how they are...

Join us for a FREE webinar! CMOS-integrated nanophotonics (CINP) has the potential to bring traditional semiconductor industry efficiency and low-cost manufacturing to single-mode, short-reach...

Silicon photonics and planar waveguide technologies have become integral components in the rapidly evolving landscape of optical communication, sensing, and integrated photonics. Planar waveguides...

A CubeSat is a type of miniaturized satellite characterized by its standardized size and modular design. CubeSats are typically used for scientific research, technology demonstration, educational...

The term "metaverse" refers to a collective virtual shared space, created by the convergence of virtually enhanced physical reality and persistent virtual worlds. It is a concept derived from science...

Ion-beam sputtering (IBS) is a physical vapor deposition (PVD) technique used for depositing thin films onto substrates. It involves bombarding a target material with a beam of energetic ions,...

An opaque projector is a device used for enlarging and projecting images from opaque objects such as printed pages, photographs, or three-dimensional objects onto a screen or surface. Unlike a...

In this month's Light Matters Extra, we give you an in-depth look at the recent Luminate Lightning Awards. New York’s Lieutenant Governor Kathy Hochul was there and tells us why Luminate is important...

Tune into this month's edition of Light Matters for 'Part 1' of an exclusive interview with SPIE CEO, Eugene Arthurs, as he speaks about his upcoming retirement. We’ll also take you to Rochester,...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

What if cancer cells in the body were so visible that doctors could guarantee removal of every last trace? Researchers at Michigan Tech are developing technology that could do just that. Also on this...

Germanium crystal refers to a crystalline form of the element germanium (Ge), which is a metalloid and semiconductor commonly used in various electronic and optical applications. Germanium crystals...