National Semiconductor Amplifies Flat Panel Display Technologies

An international research team has produced an all-perovskite tandem solar cell with exceptionally high open-circuit voltage and efficiency. The prototype device demonstrates the potential of...

The range of optical systems in which reflective optics appear is an appropriate indicator of the importance of these components. Mirrors are ubiquitous in the optical bench setups that enable...

With the development of a single-layer, blue-emitting OLED, researchers at the Max Planck Institute (MPI) for Polymer Research demonstrated that one-layer OLEDs can achieve a performance level...

ZEISS and 3D scanner and measurement systems developer Scantech are partnering to offer Scantech scanners with ZEISS inspection software. The collaborations seeks to enhance the performance of...

The Diffrar™ series from Mitsui Chemicals are an array of polymer wafers for waveguides used in AR glasses. Equipped with optical properties including a high refractive index of 1.67 or higher...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The CX.SWIR.XC cameras from Baumer are infrared cameras for applications in the semiconductor industry with wafer positioning and food industry. The cameras use static and dynamic defect pixel...

The dual-lens TSMP95000 and single-lens TSMP96000 and TSMP98000 from Vishay Intertechnology are miniaturized infrared (IR) sensor modules for remote control systems that combine a wide supply voltage...

Imaging has long been used in industrial processes to measure, monitor, control, or otherwise manage the production of goods. The challenge to the process designer is to develop a tool that captures...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

Excimers are pulsed gas lasers that deliver high output power and pulse energies in the ultraviolet and deep-ultraviolet wavelengths. This enables them to power applications that cannot be supported...

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

Laser modules play a critical role in many processes, and selecting the right laser module is essential to optimize system performance. Applications will vary widely in their requirements and the key...

The ILMS is designed for profiling focused, high-power industrial lasers. This system combines reimaging/magnification optics, a polarization preserving beam sampler, and a DataRay beam profiler to...

Embedded vision is an emerging and growing technology with use cases developing across many fields, from medical imaging to autonomous vehicles. Fundamentally, embedded vision is the integration of...

Learn how to design more efficient light pipes, with desired output performance in less time, using virtual prototyping. In this webinar, attendees will learn how to design better, more...

The high variety of tailor-fitted molecular structures of Polyethylene (PE) can fulfill the requirements of various applications, however, it also poses difficulty in the mechanical recycling of...

While the concept of neuromorphic-enabled event cameras isn’t new, the last few years have seen a significant pick up in the adoption of this technology. This is due, in part, to the progress...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to capture digital images. CMOS cameras have become ubiquitous due to their low...

A singulated die refers to an individual semiconductor chip that has been separated or singulated from a larger wafer. This term is commonly used in the semiconductor manufacturing industry. ...

An actuator is a mechanical or electromechanical device that is responsible for moving or controlling a mechanism or system. It converts various forms of energy (such as electrical, hydraulic,...

Area scan, in the context of imaging and cameras, refers to a method of capturing an entire two-dimensional image in a single snapshot or exposure. Unlike line scan, which captures images one line at...

Tune into this month's edition of Light Matters for 'Part 1' of an exclusive interview with SPIE CEO, Eugene Arthurs, as he speaks about his upcoming retirement. We’ll also take you to Rochester,...

PCO-Tech Inc. introduces their newest line of sCMOS cameras - the pco.panda 4.2 and the pco.panda 4.2 back illuminated (bi) camera. Both cameras provide high quantum efficiency with low dark current...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Lambda Research Optics, Inc. is a leading manufacturer of laser optics with high power thin-film coatings and high precision fabrications. Lambda serves a wide range of industries, such as Biotech,...