Landrex Chooses N.E. Representative

INDUS Holding AG has acquired robotics technology company Gestalt Robotics. The company joins INDUS’ engineering segment. Gestalt Robotics is a developer of automation technologies for...

Rutronik Elektronische Bauelemente GmbH, a broadline distributor of electronic components, has acquired a 30% stake in collective mind GmbH, a developer of machine vision applications for AI...

ZEISS and 3D scanner and measurement systems developer Scantech are partnering to offer Scantech scanners with ZEISS inspection software. The collaborations seeks to enhance the performance of...

Researchers from the Fraunhofer Institute for Material and Beam Technology IWS (Fraunhofer IWS) have established a spinoff company to commercialize a measuring system developed at the institute....

The VT-Z600 and VT-S1040 automated optical inspection systems from Omron Automation Americas use advanced hardware and sophisticated image processing to deliver reliability and performance at...

The LSP-LRS-1200 and -1000 from LumiSpot Tech are 905-nm laser ranging modules that can be used in laser range finding, distance sensing, consumer, and defense applications. The LSP-LRS-1200 can...

The STURDeCAM34 from e-con Systems is an automotive multi-camera designed for automotive and industrial applications. Based on onsemi’s AR0341AT CMOS image sensor, the camera delivers up to 150...

The πShaper 12_12_2.05_HP from AdlOptica Optical Systems GmbH is a beam shaper for high-power 2-µm lasers. The near-IR beam shaper transforms a Gaussian laser beam into a flat-top beam...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Illumination design has developed rapidly to include not only automotive headlamps and street lamps, but also backlit displays, fluorescent panel lighting, light-emitting diode or laser sources, and...

By observing a few simple rules that govern diode lasers’ properties, driving them loses much of its mystery. Below its threshold current, a diode laser emits LED light with spontaneous...

Imaging has long been used in industrial processes to measure, monitor, control, or otherwise manage the production of goods. The challenge to the process designer is to develop a tool that captures...

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

Laser modules play a critical role in many processes, and selecting the right laser module is essential to optimize system performance. Applications will vary widely in their requirements and the key...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

The development of omnidirectional multi-camera digital image correlation (DIC) systems to establish 3D reconstruction and pattern recognition requirements could be a potential breakthrough for...

Are you curious about how to put deep learning technologies to use? Would you like to know what deep learning can accomplish within your machine vision application? This webinar will give users...

3D optical methods have come a long way from the early stereo viewers and multiangle sliding images that existed more than a century ago. As measurement tools, these methods have in the past 40 years...

Steve Allen provides a brief overview and examples of procedures that continue to push adoption and proliferation of optical fiber-based medical devices. From cosmetic surgery to cutting-edge sensing...

GigE, short for gigabit Ethernet, refers to a standard for high-speed Ethernet communication, capable of transmitting data at rates of up to 1 gigabit per second (Gbps), or 1000 megabits per second...

An atomic absorption spectrometer (AAS) is an analytical instrument used to determine the concentration of specific chemical elements in a sample by measuring the absorption of light at...

A monochromator is an optical instrument used to isolate and select a narrow range of wavelengths from a broader spectrum of light. The term monochromator is derived from "monochromatic," meaning...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

An optical flat is a piece of glass, pyrex, or quartz having one or both surfaces carefully ground and polished plano, generally flat to less than a tenth of a wavelength. Optical flats are used in...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

More Than One Million Embedded Cameras Designed and Delivered Since 1995. Excellence. Every day. Every time. VIDEOLOGY INDUSTRIAL-GRADE CAMERAS Is a global camera developer and...