Keysight, Georgia Tech Partner on Software Development Center

Semilux International Ltd., a provider of lidar and ADB components, has started a research and development program for the development of a domestic solid-state lidar module for automotive...

Tower Semiconductor and Teramount established a collaboration based on Teramount’s “PhotonicPlug” technology and Tower’s silicon photonic “Bump-ready” wafers,...

Automation company ABB has opened its refitted U.S. robotics headquarters and manufacturing facility in Auburn Hills, Michigan. The expansion will support the development and manufacturing of ABB...

FANUC America, an industrial automation and robotics company, has established the FANUC Automation Endowed Scholarship Fund in collaboration with the SME Education Foundation, the philanthropic arm...

PI’s granite-based multi-axis motion systems can be used for the automation of wafer metrology, glass substrate inspection, and lithography applications. Based on modular concepts, the stages...

The Zebra FS42, Aurora™ Software Suite, 3S40, and 3S80 from Zebra Technologies Corporation are industrial automation solutions for manufacturers. The Zebra FS42 is a fixed industrial scanner...

The BOA™3 from Teledyne DALSA is an AI-powered smart camera for automation and industrial inspection applications. The camera uses the company’s iNspect™ no-code inspection...

The IQ Lens™ System from Theia Technologies is a vision system including a motorized lens, motor control board, average calibration data, and software with graphical interface (GUI). The IQ...

Conditions on the factory floor and in industrial cleanrooms with high-capacity air filtration systems can hamper the use of interferometry. Another problem is the testing of large-aperture mirrors...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

With the understanding of aspheric lens manufacturing provided in part one of this article, designers have the tools to optimize their aspheres; the next step is to understand how to specify and...

This document outlines how Seiwa Optical's fully automated inspection equipment can increase the threshold, reduce chip loss, and decrease production costs of wafer manufacturing.

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

This white paper explores the capabilities of MWIR hyperspectral imaging (HSI), specifically the Specim FX50 camera, in effectively sorting black plastics—a challenge for traditional NIR-based...

MTF measurement usually comprises the optics under test and additional measurement or relay optics. The whitepaper from TRIOPTICS shows that the theoretical measurement error can increase...

Additional Questions & Answers from the webinar are below Speakers: 3-D Vision for Industrial Robot Guidance Clay Flannigan Manager, Robotics and Automation Engineering ...

The societal and economic spasms of the early 2020s highlighted the crucial role of world-spanning supply chains in the modern global economy, as well as the growing role of digital technology,...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Part 1 of the Photonics Entrepreneurship Series 2021-2022, presented by Bruce Forman of QED Technologies and brought to you by Photonics Media. This series is aimed toward helping photonics...

A data acquisition (DAQ) system is a combination of hardware and software used to collect, process, and analyze data from physical phenomena or processes. data acquisition system suppliers...

GigE, short for gigabit Ethernet, refers to a standard for high-speed Ethernet communication, capable of transmitting data at rates of up to 1 gigabit per second (Gbps), or 1000 megabits per second...

The internet of things (IoT) refers to a network of interconnected physical devices, vehicles, appliances, and other objects embedded with sensors, actuators, software, and network connectivity....

Robotic arms, also known as robot arms or manipulator arms, are mechanical devices designed to mimic and perform the functions of human arms. They consist of multiple articulated segments, joints,...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

A frequency comb is a precise and regular series of equally spaced spectral lines, or frequencies, that are generated with great accuracy. The term "frequency comb" is often associated with the Nobel...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Cameras from The Imaging Source are used in many areas of everyday life: in science, industry, medicine, office, traffic engineering, the food industry, the pharmaceutical industry and the media...