Iridex Signs Distribution Deal with Peregrine Surgical

Nanoimprint technology developer Morphotonics appointed Hugo da Silva as CEO. Da Silva has over 20 years of experience in advanced materials, manufacturing, and commercialization. He most recently...

Exail, a high-tech industrial group specializing in photonics technologies, has signed a contract with Lawrence Livermore National Laboratory (LLNL) to provide more than 60 dual-stage modulators to...

The Leibniz Institute of Photonic Technology (Leibniz-IPHT) and the State University of New York at Albany (SUNY Albany) have established the Center for Biophotonic Technology and Artificial...

The U.K. is funding five quantum hubs with £100 million ($128 million) to support the development of practical applications for quantum technologies in areas like medical scanning, secure...

The WaveShift Series from TeraXion are fiber Bragg grating (FBG) reflectors for Raman fiber lasers in applications such as spectroscopy, laser pumping, biomedical, and telecommunications. The...

The single-frequency, 308-nm fiber-based UV laser from AdValue Photonics Inc. emits 3 W of average power with a diffraction limited beam. The device enables reliable, high-performance operation...

The Spectra-Physics® IceFyre® FS IR200 laser from MKS Instruments Inc. is a high-power femtosecond laser designed for fast and high-quality micromachining applications. With >200-W...

The IQ1C195(380-210) from Power Technology is a continuous wave high-power 380-nm laser diode module for high-end analytical and scientific applications, such as bioanalysis, fluorescence, and Raman...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

Given the pace at which technology advances, there always seems to be a learning curve. With the abundance of consumer electronics available, there typically is no right or wrong way to use these...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Finding the ideal ultra-fast laser source for a multiphoton imaging setup is not trivial. It is a fine balance between peak power, pulse energy and laser wavelength. In this white paper we show that...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

The erbium-doped glass laser is used in the field of eye-safe rangefinders and is characterized by its reliability and cost effectiveness. This laser is also known as the 1535nm DPSS eye-safe laser...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

Diffusing light can be used to quantitatively probe the physiology of tissues located far below the surfaces of the body. The emerging light fields contain a wealth of diagnostic information about...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Please join us for a FREE webinar. Dr. Farouc Jaffer of Harvard Medical School and Massachusetts General Hospital will present on his lab’s use of cutting-edge fluorescence molecular...

FREE WEBINAR Sponsored by: Hamamatsu & Applied Scientific Instrumentation Additional Questions & Answers from the webinar are below: Dr. Kimani C. Toussaint Jr. Quantitative...

Optical consulting services involve specialized expertise and support provided by optical engineering firms, consultants, or individual experts to assist clients with various optical-related...

Free-space optics (FSO), also known as optical wireless communication or optical wireless networking, refers to the transmission of data using modulated beams of light through free space (air or a...

The generic term applied to all sources of visible radiation from burning matter to ionized vapors and lasers, regardless of the degree of excitation.

swept-source Raman spectroscopy is an advanced analytical technique that combines the principles of Raman spectroscopy with a swept-source laser system. It enables rapid and sensitive chemical...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

On this month's episode of Light Matters, we take you to central Massachusetts as Worcester Polytechnic Institute and Quinsigamond Community College take on a comprehensive joint photonics laboratory...

Technology Transfer Programs are often a concerted effort to share skills, knowledge, technologies, methods of manufacturing, samples of manufacturing, and facilities among governments or...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

CASTECH is a recognized leading supplier of nonlinear optical crystals, laser crystals and precision optical components for laser, telecom, medical, analysis and detector markets. Products...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...