Asylum Research Invests in German Distributor

Electro Optic Systems (EOS) secured a conditional contract to supply remote weapon systems (RWS) to Ukraine valued at up to $80 million. EOS’ Defence Systems business secured the contract with...

ZEISS will expand its market presence in Poland for its Industrial Quality and Research segment by acquiring LENSO, a provider of 3D scanning and metrology solutions. LENSO will join the ZEISS Sales...

SPIE’s Awards Committee has named the recipients of its annual awards, recognizing achievements and service in photonics research, education, and industry. The awards span a broad range of...

Devices that capture light from quantum dots, like chip-scale lasers and optical amplifiers, have made their way from the lab to the commercial market. The transition for newer quantum dot-based...

The N-332 family from PI are nanometer-precision linear stages designed for applications in semiconductor technology, fiber optics, microscopy, bio-nanotechnology, metrology, and scientific research...

The DAG8-60 Series from Optimal Engineering Systems are motorized vertical elevator stages for applications including microscopy, inspection, metrology, positioning, photonics, sampling, and laser...

The FocusX from Bruker Alicona is an optical 3D measuring device meant for applications where highly reflective surfaces, steep flanks, and complex forms must be measured. Able to measure small...

The P-616 from PI is an XYZ piezo nanopositioning stage based on a parallel-kinetic design for applications such as fiber optics alignment, microscopy, 3D imaging, and semiconductor metrology, among...

By its original definition, a nanopositioning device is a mechanism capable of repeatedly delivering motion in increments as small as one nanometer. Lately demands from industry and research have...

An interferometer is an instrument that compares the position or surface structure of two objects. The basic two-beam division of amplitude interferometer components consists of a light source, a...

Ultraprecision machining can be defined in general terms as the removal of material from a substrate utilizing a machine tool that operates at a resolution of 10 nm (0.4 μin.) or less. The...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

In this white paper, Dr. Iain Johnson, Lumencor’s Director of Technical Support, tests Lumencor’s laser-based CELESTA Light Engine for consistency, power, and stability using continuous wave...

Specifications for illumination systems for biomedical imaging and industrial metrology generally converge on spectral, spatial and temporal light output characteristics. This article describes some...

Accurate control over film thickness and uniformity is essential for throughput and performance in the automotive, aerospace, semiconductor, medical, and research industries. The modern standard for...

The datasheet provides an overview of surface treatments for optical components, focusing on various types of coatings, substrates, and applications. It outlines the different types of coatings...

This webinar will discuss rapid 3D, multiplexed imaging of large tissue samples, based on recent advances in light-sheet fluorescence microscopy, multiplexed molecular labeling, and optical tissue...

3D optical methods have come a long way from the early stereo viewers and multiangle sliding images that existed more than a century ago. As measurement tools, these methods have in the past 40 years...

Presenters: Professor Stephen Boppart The Future of Healthcare With Optical Biomedical Imaging A medical doctor and professor at the University of Illinois, Boppart's...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

In optics, a motion controller refers to a device or system that precisely controls the movement of optical components, such as mirrors, lenses, stages, or other elements within an optical setup. The...

An ultrafast pulsed laser is a type of laser that emits extremely short pulses of light with durations typically on the order of femtoseconds (10-15 seconds) or picoseconds (10-12 seconds). These...

Supercontinuum refers to a broad spectrum of light that spans a wide range of wavelengths, typically from the visible to the near-infrared or even mid-infrared regions of the electromagnetic...

A multiline laser system refers to a type of laser that is capable of emitting multiple discrete wavelengths or spectral lines simultaneously. Unlike single-line lasers, which produce radiation at a...

Solving MERFISH challenges for Spatial Transcriptomics

In this video, we explore how an AOM CGH (computer-generated hologram) coupled with our metrology platform enables testing for a freeform optic. The metrology platform provides a mount for a test...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

Hear first-hand from our management team about the thought process behind Zygo's rebrand and how it went down.

An atomic force microscope is a high-resolution imaging and measurement instrument used in nanotechnology, materials science, and biology. It is a type of scanning probe microscope that operates by...

A Twyman-Green interferometer is a testing device that provides a contour map of the emergent wavefront for the observer in terms of the given wavelength of the light.

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Avantier Inc. is an unparalleled leader in providing innovative imaging systems solutions and optical systems solutions. We offer advance precision custom optical design, optical engineering...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...

Mad City Labs, Inc. is a leading manufacturer of piezo nanopositioning systems and instrumentation capable of sub-nanometer positioning resolution. Our product line of nanopositioners,...