Physicists have assembled the first integrated circuits (ICs) that use excitons -- particles that emit a flash of light as they decay -- instead of electrons to ferry signals. These exciton-based transistors could be used in a new kind of computer that bridges the gap between computing and communications. Integrated circuits, assemblies of transistors that are the building blocks for all electronic devices, currently use electrons to carry the signals needed for computation. But almost all communications devices use light, or photons, to send signals. The need to convert the signalling language from electrons to photons limits the speed of electronic devices. Leonid Butov, a professor of physics at the University of California, San Diego (UCSD), and his colleagues at UCSD and UC Santa Barbara (UCSB), have built several exciton-based transistors that could form the foundation of a new type of computer, they reported June 19 in an online version of the journal Science. The circuits they have assembled are the first computing devices to use excitons. "Our transistors process signals using exitons, which like electrons can be controlled with electrical voltages but unlike electrons transform into photons at the output of the circuit," Butov said. "This direct coupling of excitons to photons bridges a gap between computing and communications." A circuit that uses excitons for computing flashes light as the particles decay to release photons. (Image courtesy Leonid Butov/UCSD) Excitons are created by light in a semiconductor such as gallium arsenide, which separates a negatively charged electron from a positively charged "hole." If the pair remains linked, it forms an exciton. When the electron recombines with the hole, the exciton decays and releases its energy as a flash of light. Butov and his colleagues have used a special type of exciton where the electron and its hole are confined to different "quantum wells," separated by several nanometers. This configuration creates an opportunity to control the flow of excitons using voltage supplied by electrodes. These voltage gates create an energy bump that can halt the movement of excitons or allow them to flow. Once that energy barrier is removed, the exciton can travel to the transistor output and transform to light, which could be fed directly into a communication circuit, eliminating the need to convert the signal. "Excitons are directly coupled to photons, which allows us to link computation and communication," Butov said. Others involved in the discovery were UCSD's Alex High and Ekaterina Novitskaya and UCSB's Micah Hanson and Arthur Gossard. The scientists created simple ICs by joining exciton transistors to form several types of switches that accurately direct signals along one or several pathways. Because excitons are fast, the switches can be flipped quickly. Switching times on the order of 200 picoseconds have been demonstrated so far. (A picosecond is one trillionth of a second). While exciton computation itself may not be faster than electron-based circuits, the speed will come when sending signals to another machine, or between different parts of a chip that are connected by an optical link, the researchers said. The circuits Butov and his colleagues created demonstrate that excitons could be used for computing, but practical applications will require the use of different materials. The gallium arsenide excitonic circuits will only work at frigid temperatures below 40 K (or -390 °F), a limit determined by the binding energy of the excitons. (Warmer than that, and the electrons won't bind with their holes to form excitons in this structure). The operating temperature can be increased by choosing different semiconductor materials, the scientists said. The research was funded by the Army Research Office, the Department of Energy and the National Science Foundation. For more information, visit: www.ucsd.edu