Search
Menu
Meadowlark Optics - Wave Plates 6/24 LB 2024

Continuous-Wave OPA Supports Noise-Reduced Chip-Scale Optical Signal Processing

Facebook X LinkedIn Email
GOTHENBURG, Sweden, Oct. 8, 2021 — An optical amplifier developed at Chalmers University of Technology is poised to radically improve optical communications performance. The compact amplifier is designed to fit on a chip and amplify light without generating excess noise.

Light-based communications make it possible to send information around the world and into space. However, when it travels long distances, the light loses power. Without amplifiers, up to 99% of the signal in an optical fiber cable would disappear within 100 km.

As a result, multiple amplifiers are needed to support optical transmission, and each added amplifier increases the noise level. This diminishes signal quality.

The compact optical amplifier developed at Chalmers is thousands of times smaller than its precursor, its developers said. The component is made of silicon nitride and consists of nine separate waveguides. Each waveguide is composed of 22 spirals and can amplify light by about 10 times with a noise figure of only 1.2 decibels. Each waveguide on the 20 mm chip outperforms a single bulky amplifier. Courtesy of Ping Zhao, Zhichao Ye, and Yen Strandqvist/Chalmers University of Technology.
The compact optical amplifier developed at Chalmers is thousands of times smaller than its precursor, its developers said. The component is made of silicon nitride and consists of nine separate waveguides. Each waveguide is composed of 22 spirals and can amplify light by about 10 times with a noise figure of only 1.2 decibels. Each waveguide on the 20-mm chip outperforms a single bulky amplifier. Courtesy of Ping Zhao, Zhichao Ye, and Yen Strandqvist/Chalmers University of Technology.
Optical parametric amplifiers (OPAs), which use a nonlinear optical material to create amplification, can amplify signals without generating excess noise. The monolithic OPA developed by the Chalmers team based on the Kerr effect demonstrates a noise figure that is well below the conventional quantum limit when operated in phase-sensitive mode.

Although other amplifiers have used the Kerr effect, none have demonstrated the ability to do so in a format as compact as the Chalmers device — which is small enough to fit on a computer chip just several mm in size.

The amplifier operates in a continuous wave (CW). The researchers said that until now, parametric amplifiers have operated with a pulsed pump only, limiting their use in real applications.

The Chalmers team used a low-loss (1.4 dB/m) silicon nitride waveguide within a chip area of 23 mm2, to demonstrate CW parametric amplification of 9.5 dB with a noise figure of 1.2 dB — considerably below the conventional 3-dB quantum limit and, according to the team, the lowest loss ever achieved in a dispersion-engineered, integrated waveguide, silicon-nitride material platform. Because silicon nitride is transparent from the visible to the mid-infrared wavelength range, its use makes the amplifier scalable to different wavelengths.

DataRay Inc. - ISO 11146-Compliant

With very low noise and a small monolithic footprint, the CW-pumped, silicon nitride-based amplifier could be a milestone for optical communications, ultrafast spectroscopy, and quantum optics and metrology. The researchers believe that an even lower noise figure and an even higher gain in amplification are possible by further reducing the waveguide losses, increasing the waveguide length, and reducing the crosstalk between the fundamental and higher-order optical modes.

The new component is made of silicon nitride and consists of nine separate waveguides (left). Each waveguide is composed of 22 spirals and can amplify light by about ten times with a noise figure of only 1.2 decibels. Each spiral (right) has an area of 1 square millimeter and the shape enables the compact design of the amplifier.
The new component is made of silicon nitride and consists of nine separate waveguides (left). Each waveguide is composed of 22 spirals and can amplify light by about 10 times with a noise figure of only 1.2 dB. Each spiral (right) has an area of 1 mm2 and the shape enables the compact design of the amplifier. Courtesy of Zhichao Ye and Yen Strandqvist/Chalmers University of Technology.
“Since it’s possible to integrate the amplifier into very small modules, you can get cheaper solutions with much better performance, making this very interesting for commercial players in the long run,” said professor Peter Andrekson, who led the research.

The amplifier’s strong performance also means that fewer amplifiers would be needed for long-distance data transmission, making it a cost-effective option for boosting optical signals.

“We consider this to be an important step toward practical use, not only in communication, but in areas including quantum computers, various sensor systems, and in metrology when making atmospheric measurements from satellites for Earth monitoring,” Andrekson said. “This could be compared to switching from older, dial-up internet to modern broadband, with high speed and quality.”

The research was published in Science Direct (www.science.org/doi/10.1126/sciadv.abi8150).

Published: October 2021
Glossary
metrology
Metrology is the science and practice of measurement. It encompasses the theoretical and practical aspects of measurement, including the development of measurement standards, techniques, and instruments, as well as the application of measurement principles in various fields. The primary objectives of metrology are to ensure accuracy, reliability, and consistency in measurements and to establish traceability to recognized standards. Metrology plays a crucial role in science, industry,...
quantum
The term quantum refers to the fundamental unit or discrete amount of a physical quantity involved in interactions at the atomic and subatomic scales. It originates from quantum theory, a branch of physics that emerged in the early 20th century to explain phenomena observed on very small scales, where classical physics fails to provide accurate explanations. In the context of quantum theory, several key concepts are associated with the term quantum: Quantum mechanics: This is the branch of...
quantum optics
The area of optics in which quantum theory is used to describe light in discrete units or "quanta" of energy known as photons. First observed by Albert Einstein's photoelectric effect, this particle description of light is the foundation for describing the transfer of energy (i.e. absorption and emission) in light matter interaction.
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
educationResearch & TechnologyEuropeChalmers University of TechnologyChalmers UniversitySwedenOpticsoptical amplificationoptical metrologymetrologyfiber opticsLight Sourcesquantumquantum opticsquantum metrologyTest & Measurementspectroscopic applicationsnanowaveguidesoptical waveguidingsingle-mode waveguidingoptical devices

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.