Accu-Cal 50-LED Radiometer
Dymax, HeadquartersRequest Info
TORRINGTON, Conn., May 13, 2010 — Although many UV and visible radiometers have a wide range of sensitivity in the UVA through visible portions of the spectrum, their sensitivity levels may not match the specific narrowband frequencies emitted by LED curing systems. The CE-marked Accu-Cal 50-LED radiometer from Dymax Corp. addresses this and offers accurate intensity and dosage measurements for LED curing equipment.
Consistent light-curing requires periodic monitoring of light energy intensity and dosage levels. The radiometer is simple to operate and offers accurate measurement of curing energy. It can measure energy levels emitted from 3-, 5- and 8-mm lightguides and LED floodlamps.
A spectral sensitivity range of 350 to 450 nm and stray or reflected energy intensity measurement from 1 mW/cm2 to 40 W/cm2 make this unit suitable for measuring LED-curing source energy levels. A 9-mm-diameter photosensor assembly provides repeatable measurements and protection from high temperatures.
The radiometer is PTB- and NIST-traceable, and it measures 145 × 63 × 30 mm. The operating temperature of the optometer is from 5 to 40 °C, and of the detector, 120 °C continuous, with 200 °C peak. Power is supplied by two AA batteries with a battery life of 250 h. The unit automatically shuts off after 1 h.
https://dymax.com
/Buyers_Guide/Dymax_Headquarters/c3927
Published: May 2010
REQUEST INFO ABOUT THIS PRODUCT
* First Name:
* Last Name:
* Email Address:
* Company:
* Country:
Message:
When you click "Send Request", we will record and send your personal contact information to Dymax, Headquarters by email so they may respond directly. You also agree that Photonics Media may contact you with information related to this inquiry, and that you have read and accept our
Privacy Policy and
Terms and Conditions of Use.
Register or login to auto-populate this form:
Login
Register
* Required