Definitions

An Abbe-Porro prism, often referred to simply as a Porro prism, is an optical prism used in binoculars and other optical instruments to invert and reverse an image. It is named after the Italian...

Measures the absorption or sample transmittance over a range of specified wavelengths. Sample may be placed within the device and the transmission measured to an accuracy of given percent. The...

Actinic glass is a type of glass specifically designed to filter or block ultraviolet (UV) light and other forms of actinic radiation. UV filtering: Actinic glass effectively absorbs or...

An active infrared (IR) system is a type of technology that uses infrared radiation actively emitted and detected by sensors for various purposes. Here are the key features and applications of active...

An optical adapter typically refers to a device or component used in optical systems to facilitate connections between different types of optical fibers, connectors, or interfaces. Here are a few...

Optical addressability refers to the capability to control or manipulate individual elements that emit or modulate light (such as pixels in a display or light sources in an optical network) using...

Optical thin film adhesion specifically refers to the adhesion properties of thin films used in optical applications. Here’s a detailed definition: Thin film materials: Optical thin films...

The advanced communication technology satellite (ACTS) was a program developed by NASA (National Aeronautics and Space Administration) in the United States to demonstrate and advance satellite...

A category of systems designed to communicate a photo taken from the air (e.g., aircraft, balloon, satellite) to a ground station. It can be done by direct television transmission of the photo, or by...

Alternating current (AC) is an electrical current in which the direction of flow of electric charge periodically reverses. This reversal occurs at regular intervals, typically in a sinusoidal...

In digital data transmission, the representation of a bit by change in amplitude of the outgoing signal. Amplitude shift keying (ASK) is less sensitive than phase-shift keying, but can tolerate...

Analog-to-analog (AA) refers to the process or system that involves the conversion or transmission of analog signals from one form to another, without converting them into digital signals at any...

Analog-to-digital (A/D) is a process that converts continuous analog signals into discrete digital signals. This process coverts analog signals continuously, which vary smoothly over time, into a...

An antireflection coating (AR coating) is a thin film or coating applied to optical surfaces, such as lenses or windows, to minimize unwanted reflections and increase the transmission of light...

The use of a variable transmission filter at the aperture stop of a lens to modify its diffraction pattern. Reduced transmission at the center of the aperture will favor performance at high...

A mode of data transmission whereby each bit of information is generated separately, with some stop/start code to indicate the interval between bits.

Attenuation refers to the gradual loss or reduction of intensity, force, or magnitude of a particular property as it propagates through a medium or travels over a distance. This concept is prevalent...

Concerned with the transmission and reception of both sight and sound. An audiovisual system communicates pictorial images and audio signals.

The propagation constant evaluated along the axis of a waveguide, that is, in the direction of transmission. Also called axial propagation wave number.

A filter with a transmission that is high for a particular band of frequencies, but that falls to low values above and below this band.

The simplest method of transmission on a local area network. The entire bandwidth of the cable is used to transmit a single unmodulated digital signal. Baseband transmission is capable of...

A unit of speed of transmission or receipt of a signal, roughly equal to bits per second; common baud rates are 300, 1200, 2400, 4800 and 9600.

Signal used in optical transmission systems to generate currents in a detector that are decoded with reference to a specified threshold.

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or transmit light over a broad range of wavelengths. These mirrors are constructed...

A local area network topology in which all nodes are tapped off a single cable, and all hear every transmission on the cable.

Camera Link HS (high speed) is a standard developed for high-speed digital data transmission in machine vision and industrial imaging applications. It is an evolution of the original Camera Link...

The electron beam tube of a television camera that converts an optical image into a pattern of electrostatic charges and then scans the pattern to produce a corresponding electronic signal for...

An optical interference coating, vacuum-deposited on a circular substrate, whose transmission characteristics may be varied by physical rotation.

CoaXPress (CoaXPress or CXP) is a standardized digital interface and communication protocol used primarily in machine vision and industrial imaging applications. It enables high-speed data...

A fiber optic communications system that works on the principles of homodyning or heterodyning. The transmitting laser produces an optical wave that is modulated in amplitude, phase or frequency by...

A coherent fiber bundle (CFB), also known as a coherent fiber optic bundle, is an assembly of multiple optical fibers arranged in a specific geometric pattern to maintain the spatial coherence of...

The transmission of a color photograph by separating the colors into varying intensities of red, blue and green, and then sending separate transmissions of the three color signals to a receiving...

A filter that passes a series of wavelength regions that are at equal distances from one another, such that its output resembles the teeth of a comb. In video transmission, a comb filter is used to...

A deliberately nonlinear amplitude modulation that strengthens weak signals and reduces strong signals for transmission.

Energy loss encountered at connectors in optical fiber transmission systems. The major contributors are mutual core displacement and fiber axis tilt. It is observed in both permanent splices and...

A liquid, usually of a specific refractive index and dispersion, serving as an interface between two solids to form a complete light transmission system.

Continuous wave (CW) refers to a type of signal or transmission where the signal is constant and does not vary with time. In various contexts, the term is used to describe continuous, uninterrupted...

The study of the transmission of radiant energy through crystals, especially anisotropic crystals, and their effects on polarization.

A custom optic refers to an optical component that is designed, manufactured, and tailored to meet specific requirements or applications. These optics can include lenses, mirrors, prisms, filters, or...

A technique for measuring fiber attenuation or distortion by performing two transmission measurements. One is at the output end of the full length of the fiber. The other is within 1 to 3 m of the...

1. In detector technology, the long wavelength at which detector response falls to a set percentage (usually 20 or 50 percent). 2. In fiber optics, the shortest wavelength at which a fiber transmits...

In filter terminology, that wavelength where the filter transmission increases beyond 5 percent.

The portion of a glow discharge tube that permits little or no light transmission.

A disc contained within an electronic cell counter for regulating light transmission.

The transmission of light by a condenser to observe either very small particles or very fine lines with a microscope.

The communications network between nodes of a data transmission system.

A device used to delay transmission of a signal for functions such as memory loops, sequential processing or built-in testing. The delay can be achieved by coiling long lengths of coaxial cable or...