Search
Menu
Optimax Systems, Inc. - Ultrafast Coatings 2024 LB
Photonics Marketplace

Show Filters
Hide Filters
Products by Category

Key Suppliers

Sheetak -  Cooling at your Fingertip 5/24 MR
HIWIN Corp. - Datowork Strain Wave Gears HP 10/24
47 products

Photonics Products

Clear All Filters xpositioning drive x
BiSlide® Linear Assemblies
BiSlide® Linear Assemblies
Velmex Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 136.1kg
  • Height: 6.2cm
  • X-Axis Travel Length: 203.2cm
  • Y-Axis Travel Length: 203.2cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
  • Load Capacity (horizontally): 300 lbs
  • Travel Lengths: up to 80"
UniSlide® Assemblies
UniSlide® Assemblies
Velmex Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 182kg
  • Height: 7.95cm
  • X-Axis Travel Length: 106.68cm
  • Y-Axis Travel Length: 106.68cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
Velmex VXC™ Motor Controller
Velmex VXC™ Motor Controller
Velmex Inc.
  • Category: Other Photonic Products / Components, Equipment, & Systems
  • Type: Component
PY Series Mounts
PY Series Mounts
Siskiyou Corporation
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Optical Mounts
IVM Series, Top Adjust Kinematic Mounts
IVM Series, Top Adjust Kinematic Mounts
Siskiyou Corporation
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Optical Mounts
7600 Series Stage
7600 Series Stage
Siskiyou Corporation
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 2.5kg
  • Height: 22cm
  • X-Axis Travel Length: 20mm
  • Y-Axis Travel Length: 20mm
  • Max. Linear Speed: 1.7mm/s
  • Backlash: < 5 µm
  • Maximum horizontal axis load: 10 lbs
  • Maximum vertical axis load: 4 lbs
V-610 High Precision Rotation Stage
V-610 High Precision Rotation Stage
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 2kg
  • Mass: 630g
  • Height: 28mm
  • Max. Rotation Speed (degrees/s): 540
  • Stage Type: Motorized
  • Driver Included?: Yes
NanoScanZ Nanopositioning Piezo Z Stages
NanoScanZ Nanopositioning Piezo Z Stages
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 500g
  • Height: 21mm
  • Stage Type: Motorized
  • Accuracy and Linearity: 0.5% of travel
  • Operating Temperature: 5-50 °C
  • Repeatability: 5 nm
Brushless DC Motor Driven XY Stage
Brushless DC Motor Driven XY Stage
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Mass: 8.9kg
  • Height: 70.1mm
  • X-Axis Travel Length: 150mm
  • Y-Axis Travel Length: 150mm
  • Max. Linear Speed: 170mm/s
  • Absolute On-Axis Accuracy: ±10 μm
  • Continuous Motor Force: 10.0 N
  • Maximum Acceleration: 1000 mm/s^2
VantagePro Galvanometer Scanners
VantagePro Galvanometer Scanners
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 1 Axis
  • Repeatablility (µrad): 20
  • Linearity (%): 99.88
  • Overall Height (no mirror): 35.7mm
  • Weight: 0.45kg
  • Housing Diameter: 9.47 mm
  • Max. Beam Diameter: 4 mm or 5 mm Available
  • Mirror Coatings Available: Protected Silver, Nd:YAG
Fine Adjustment Screws
Fine Adjustment Screws
Kozak Micro Adjusters
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Other
Linear Stages
Linear Stages
BUSCH Microsystems GmbH
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Max. Acceleration: 5 m/s²
  • Max. velocity: 0,2 m/s
  • Resolution of Measuring System: 100 – 1 nm
Polaris® 5-Axis Kinematic Mounts
Polaris® 5-Axis Kinematic Mounts
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Optical Mounts
  • Cleanroom Compatible: Yes
  • Optic Diameter: Ø1/2"
  • Tip/Tilt Range: ±4°
5 mm Linear Stage with Piezoelectric Inertia Drive
5 mm Linear Stage with Piezoelectric Inertia Drive
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 1kg
  • Mass: 32g
  • Height: 6.5mm
  • X-Axis Travel Length: 5mm
  • Max. Linear Speed: 10mm/s
  • Stage Type: Motorized
  • Connector Type: 15-Pin Female D-Sub
  • Max. Step Frequency: 20 kHz
  • Operation: Open-Loop
Multi-Axis Gantries, Cartesian Robots
Multi-Axis Gantries, Cartesian Robots
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
Miniature Linear Stages
Miniature Linear Stages
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
HT1111LC ProScan Stage
HT1111LC ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 100kg
  • X-Axis Travel Length: 108mm
  • Y-Axis Travel Length: 108mm
  • Stage Type: Motorized
  • Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
  • Minimum Step Size: 0.4 µm
  • Stepper Motor: 4 phase, 1 amp/phase, microstepping
PRO190LM Series
PRO190LM Series
Aerotech Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 60kg
  • Mass: 36.4kg
  • Height: 85mm
  • X-Axis Travel Length: 1000mm
  • Max. Linear Speed: 2m/s
  • Stage Type: Motorized
  • Accuracy: ±1.5 μm
  • Resolution: 5 nm
M3-RS-U2-4.5-360 Rotary Stage
M3-RS-U2-4.5-360 Rotary Stage
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 3g
  • Mass: 3g
  • Height: 16mm
  • Max. Rotation Speed (degrees/s): 1100
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Accuracy: 0.25 deg
  • Controller: Embedded in the stage!
  • Encoder Resolution: ~21.9727 mdeg (Absolute)
DK-M3-RS-U2-2M-20-L Beam Steering Developer’s Kit
DK-M3-RS-U2-2M-20-L Beam Steering Developer’s Kit
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 3g
  • Mass: 3g
  • Height: 16mm
  • Max. Rotation Speed (degrees/s): 1100
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Accuracy: 0.25 deg
  • Closed-loop Controller: Embedded in the stage!
  • Encoder Resolution: ~21.9727 mdeg (Absolute)
M3-LS-U2-8 Linear Stage
M3-LS-U2-8 Linear Stage
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 20g
  • Mass: 15g
  • Height: 10mm
  • X-Axis Travel Length: 8mm
  • Y-Axis Travel Length: 8mm
  • Max. Linear Speed: 35mm/s
  • Control interface: I2C or SPI or USB
  • Controller: Embedded in stage!
  • Input power: 5 V DC (4.75 V to 5.5 V)
M3-LS-3.4-15 Linear Stage
M3-LS-3.4-15 Linear Stage
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 200g
  • Mass: 30g
  • Height: 11mm
  • X-Axis Travel Length: 15mm
  • Y-Axis Travel Length: 15mm
  • Max. Linear Speed: 4mm/s
  • Closed-loop Controller: Embedded in the stage!
  • Force: 1 N
  • Length × Width x Height: 32 x 32 x 11 mm
OMDe2
OMDe2
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • Communication: RS485
  • Controller: Stepper Motor
  • Drive Power: 2.5 Amp
PCIx Motion Controller, PCI Bus
PCIx Motion Controller, PCI Bus
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • Analog Output: 16-bit Resolution
  • Encoder Feedback: 4
  • GPIO: 12
IG 282 SD Rotary Surface Grinder
IG 282 SD Rotary Surface Grinder
DCM Tech Inc.
  • Category: Optics & Optical Fabrication / Optical Fabrication Equipment
  • Type: Grinding
  • Width: 203cm
  • Height: 229cm
  • Length: 173cm
  • Volts: 230
  • Max Part Height (Inch): 12
  • Max Swing Diameter (inch): 27
  • Spindle Motor (HP): 20
MMS
MMS
Dover Motion
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 12kg
  • Height: 37mm
  • X-Axis Travel Length: 400mm
  • Max. Linear Speed: 2m/s
  • Stage Type: Motorized
  • Driver Included?: No
  • Accuracy: <15 μm
  • Repeatability: 2 μm
UMX Motion Controller, USB
UMX Motion Controller, USB
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • UMX-25: 2-axis servo controller
  • UMX-26: 2-axis stepper controller
  • UMX-45: 4-axis servo controller
MAXnet Motion Controller
MAXnet Motion Controller
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • MAXnet-3000: 3-axis stepper or servo
  • MAXnet-5000: 5-axis stepper or servo
  • MAXnet-A000: 10-axis stepper or servo
Electric Cylinder with Built-in Encoder
Electric Cylinder with Built-in Encoder
Moticont
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • X-Axis Travel Length: 2.5cm
  • Max. Linear Speed: 100cm/s
  • Continuous Force: up to 33.9 N
  • Encoder Resolution: 1.25 and 5.0 µm
  • Intermittent Force: up to 107 N
DLS Hybrid-Drives
DLS Hybrid-Drives
SmarAct GmbH
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Mass: 50g
  • Height: 12mm
  • X-Axis Travel Length: 21mm
  • Max. Linear Speed: 20
  • Stage Type: Motorized
  • Scan Range: > 10 µm
SMARPOD CLS-32, hexapod-like
SMARPOD CLS-32, hexapod-like
SmarAct GmbH
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Mass: 550g
  • Height: 54mm
  • X-Axis Range: 20mm
  • Y-Axis Range: 20mm
  • Z-Axis Range: 10mm
Hollow Core Motorized Rotation Stage
Hollow Core Motorized Rotation Stage
Optimal Engineering Systems Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Goniometer Stage
  • Max. Load: 45kg
  • Mass: 1.7kg
  • Height: 4.5cm
  • Max. Rotation Speed (degrees/s): 90
  • Stage Type: Manual,Motorized
  • Driver Included?: No
  • Aperture Size: 3 cm
  • Range of Travel: 360 degrees continuous
  • Stage Diameter: from 59 to 400 mm
DC Motor Motorized Linear Stages
DC Motor Motorized Linear Stages
Moticont
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 20kg
  • Mass: 6.4kg
  • Height: 9.5cm
  • X-Axis Travel Length: 13.2cm
  • Y-Axis Travel Length: 13.2cm
  • Max. Linear Speed: 150cm/s
  • Continuous Force: 4.6 to 21.5 N
  • Continuous Power: 10 to 50 W
  • Encoder Type: Quadrature
ANPx311
ANPx311
attocube systems AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 2000g
  • Mass: 30g
  • Height: 10mm
  • X-Axis Travel Length: 2.5mm
  • Stage Type: Motorized
  • magnetic field: 0 - 31 T
  • temperature range: 1 - 373 K
Scanius Line
Scanius Line
piezosystem jena Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 3kg
  • Height: 35mm
  • X-Axis Travel Length: 150mm
  • Y-Axis Travel Length: 72mm
  • Max. Linear Speed: 160mm/s
  • Stage Type: Motorized
  • Flatness (over 10 mm): 0,2
  • Motor Type: piezoelectric drive
  • On-axis-accuracy: 20 μrad
Micrometer Screw Piezo Drive - MICI
Micrometer Screw Piezo Drive - MICI
piezosystem jena Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Optical Mounts
  • Capacitance (±20%): 7.2 μF
  • Max. push forces: 110 N
  • Motion Loop: 250 μm
Saturn 9B
Saturn 9B
ScannerMAX
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 10mm
  • Max. Scan Angle X (degrees): 110
  • Max. Scan Angle Y (degrees): 110
  • Small Step Response (µs): 300
  • Repeatablility (µrad): 5
  • Linearity (%): 99.9
Saturn 5B
Saturn 5B
ScannerMAX
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 6mm
  • Max. Scan Angle X (degrees): 110
  • Max. Scan Angle Y (degrees): 110
  • Small Step Response (µs): 120
  • Repeatablility (µrad): 5
  • Linearity (%): 99.9
Saturn 1B
Saturn 1B
ScannerMAX
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 4mm
  • Max. Scan Angle X (degrees): 110
  • Max. Scan Angle Y (degrees): 110
  • Small Step Response (µs): 75
  • Repeatablility (µrad): 5
  • Linearity (%): 99.9
MT25
MT25
mechOnics AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 100g
  • Mass: 46g
  • Height: 30.5mm
  • Max. Rotation Speed (degrees/s): 1
  • Stage Type: Motorized
  • Driver Included?: No
  • Ambient Conditions: Standard
  • High Vacuum Preparation: 10^-6 mbar
  • Ultra-high Vacuum Prep.: 10^-9 mbar
MX35 3D
MX35 3D
mechOnics AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 200g
  • Mass: 76g
  • Height: 36mm
  • X-Axis Travel Length: 10mm
  • Y-Axis Travel Length: 10mm
  • Z-Axis Travel Length: 10mm
  • Ambient Conditions: Standard
  • High Vacuum Preparation: 10^-6 mbar
  • Ultra-high Vacuum Prep.: 10^-9 mbar
MS30
MS30
mechOnics AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 400g
  • Mass: 32g
  • Height: 12.5mm
  • X-Axis Travel Length: 8mm
  • Y-Axis Travel Length: 18mm
  • Z-Axis Travel Length: 30mm
  • Open Loop Version: Up to 50 nm repeatability
  • Open Loop Version: 10 nm min. step size
  • Standard Version: Ambient conditions
MS15
MS15
mechOnics AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 0.3kg
  • Mass: 0.04kg
  • Height: 7mm
  • X-Axis Travel Length: 3.5mm
  • Y-Axis Travel Length: 3.5mm
  • Z-Axis Travel Length: 3.5mm
  • Ambient Conditions: Standard
  • High Vacuum Preparation: 10^-6 mbar
  • Ultra-high Vacuum Prep.: 10^-9 mbar
NTS-3
NTS-3
J.A. Noll Co.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 1kg
  • Mass: 0.2kg
  • Height: 2cm
  • X-Axis Travel Length: 2.5cm
  • Y-Axis Travel Length: 2.3cm
  • Stage Type: Manual
Low Profile Motorized Linear Stage
Low Profile Motorized Linear Stage
IntelLiDrives Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 20kg
  • Mass: 3kg
  • Height: 42mm
  • X-Axis Travel Length: 600mm
  • Y-Axis Travel Length: 600mm
  • Max. Linear Speed: 40
  • Resolution: 0.25 micron
Planar ServoRIng PSR-200
Planar ServoRIng PSR-200
IntelLiDrives Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 50kg
  • Mass: 7kg
  • Height: 42mm
  • Max. Rotation Speed (degrees/s): 300
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Continuous current: 5.1 amp
  • Resolution: 0.5 arc-sec
  • Tabletop diam: 200 mm
ServoBelt Linear Drive
ServoBelt Linear Drive
Servo2Go.com Ltd.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 150kg
  • X-Axis Travel Length: 5000cm
  • Y-Axis Travel Length: 5000cm
  • Stage Type: Manual,Motorized
Photonics Products

Marketplace Help Need Help?
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.