Search
Menu
PI Physik Instrumente - 50 ways hexapod ROS LB 7/24
Photonics Marketplace

Show Filters
Hide Filters
Products by Category

Key Suppliers

CASTECH INC - High Precision CNC Polished Aspherical Lenses
AdTech Ceramics - Ceramic Packages 1-24 HP
25 products

Photonics Products

Clear All Filters xmotor controllers x
HT1111LC ProScan Stage
HT1111LC ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 100kg
  • X-Axis Travel Length: 108mm
  • Y-Axis Travel Length: 108mm
  • Stage Type: Motorized
  • Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
  • Minimum Step Size: 0.4 µm
  • Stepper Motor: 4 phase, 1 amp/phase, microstepping
Linear Stages
Linear Stages
BUSCH Microsystems GmbH
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Max. Acceleration: 5 m/s²
  • Max. velocity: 0,2 m/s
  • Resolution of Measuring System: 100 – 1 nm
5 mm Linear Stage with Piezoelectric Inertia Drive
5 mm Linear Stage with Piezoelectric Inertia Drive
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 1kg
  • Mass: 32g
  • Height: 6.5mm
  • X-Axis Travel Length: 5mm
  • Max. Linear Speed: 10mm/s
  • Stage Type: Motorized
  • Connector Type: 15-Pin Female D-Sub
  • Max. Step Frequency: 20 kHz
  • Operation: Open-Loop
Automated Photonics Alignment Systems
Automated Photonics Alignment Systems
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Other
H-840 High Performance High Value Hexapod
H-840 High Performance High Value Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 40kg
  • Mass: 5kg
  • Height: 25cm
  • X-Axis Range: 10cm
  • Y-Axis Range: 10cm
  • Z-Axis Range: 5cm
H117 ProScan Stage
H117 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 100mm/s
  • Stage Type: Motorized
  • Max. Resolution: up to 10 nm
  • Repeatability: ±0.7 µm
H101F Flat Top Stage
H101F Flat Top Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 42mm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 40mm/s
  • Stage Type: Motorized
  • Minimum Step Size (resolution): 0.02 µm
H101A ProScan™ Stage
H101A ProScan™ Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 68cm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Minimum Step Size: 0.01 µm
  • XY Repeatability: 0.7 µm
ES107 OptiScan Stage
ES107 OptiScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Drive Mechanism: Anti-backlash precision lead screw
  • Linear Slides: 3 mm ball bearings
  • Repeatability: ±5 µm
H107 ProScan Stage
H107 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 63mm
  • X-Axis Travel Length: 112mm
  • Y-Axis Travel Length: 70mm
  • Stage Type: Motorized
  • Linear Slides: 3 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: 4 phase, 1 amp per phase micro stepping
HLD117 Linear Motor Stage
HLD117 Linear Motor Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 6kg
  • Mass: 7kg
  • Height: 45mm
  • X-Axis Travel Length: 120mm
  • Y-Axis Travel Length: 80mm
  • Max. Linear Speed: 300mm/s
  • Metric Accuracy (per mm of travel): 0.045 µm
  • Min. Step Size (resolution): 0.05 µm
  • XY Repeatability: 0.15 µm
M3-RS-U2-4.5-360 Rotary Stage
M3-RS-U2-4.5-360 Rotary Stage
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 3g
  • Mass: 3g
  • Height: 16mm
  • Max. Rotation Speed (degrees/s): 1100
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Accuracy: 0.25 deg
  • Controller: Embedded in the stage!
  • Encoder Resolution: ~21.9727 mdeg (Absolute)
DK-M3-RS-U2-2M-20-L Beam Steering Developer’s Kit
DK-M3-RS-U2-2M-20-L Beam Steering Developer’s Kit
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 3g
  • Mass: 3g
  • Height: 16mm
  • Max. Rotation Speed (degrees/s): 1100
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Accuracy: 0.25 deg
  • Closed-loop Controller: Embedded in the stage!
  • Encoder Resolution: ~21.9727 mdeg (Absolute)
M3-LS-3.4-15 Linear Stage
M3-LS-3.4-15 Linear Stage
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 200g
  • Mass: 30g
  • Height: 11mm
  • X-Axis Travel Length: 15mm
  • Y-Axis Travel Length: 15mm
  • Max. Linear Speed: 4mm/s
  • Closed-loop Controller: Embedded in the stage!
  • Force: 1 N
  • Length × Width x Height: 32 x 32 x 11 mm
OMDe2
OMDe2
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • Communication: RS485
  • Controller: Stepper Motor
  • Drive Power: 2.5 Amp
PCIx Motion Controller, PCI Bus
PCIx Motion Controller, PCI Bus
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • Analog Output: 16-bit Resolution
  • Encoder Feedback: 4
  • GPIO: 12
OMA Servo Controller & Amp
OMA Servo Controller & Amp
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • Absolure Encoder: BiSS
  • Commands: 170
  • Communication: USB
DL125
DL125
MKS/Newport
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 2kg
  • Mass: 2.8kg
  • Height: 44.45mm
  • X-Axis Travel Length: 125mm
  • Max. Linear Speed: 500mm/s
  • Stage Type: Motorized
  • Accuracy Guaranteed: ±1.5 µm
  • Bi-directional Rep.: ±0.15 µm
  • Min. Incremental Motion: 0.075 µm
SmartStage™ XY
SmartStage™ XY
Dover Motion
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 200mm
  • Y-Axis Travel Length: 200mm
  • Max. Linear Speed: 1m/s
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Accuracy: < 16 μm
  • Repeatability: 0.8 μm
U6 Ultra XYZ/RYP Fully Automated Positioner
U6 Ultra XYZ/RYP Fully Automated Positioner
Luminos Photonics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 1kg
  • Mass: 2.2kg
  • Height: 156mm
  • X-Axis Travel Length: 2.5mm
  • Y-Axis Travel Length: 2.5mm
  • Z-Axis Travel Length: 12.7mm
  • Mounting Plate Height: 131.8 mm
  • Pitch Travel: 3 deg
  • Roll Travel: 3 deg
U3 Ultra XYZ Fully Automated Positioner
U3 Ultra XYZ Fully Automated Positioner
Luminos Photonics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 1kg
  • Mass: 1.85kg
  • Height: 100mm
  • X-Axis Travel Length: 2.5mm
  • Y-Axis Travel Length: 2.5mm
  • Z-Axis Travel Length: 12.7mm
  • X & Y Max. Linear Speed: 2 mm/s
UMX Motion Controller, USB
UMX Motion Controller, USB
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • UMX-25: 2-axis servo controller
  • UMX-26: 2-axis stepper controller
  • UMX-45: 4-axis servo controller
MAXnet Motion Controller
MAXnet Motion Controller
OMS Motion Inc.
  • Category: Optomechanics & Positioning / Other Optomechanics / Positioning
  • Type: Motion Controllers
  • MAXnet-3000: 3-axis stepper or servo
  • MAXnet-5000: 5-axis stepper or servo
  • MAXnet-A000: 10-axis stepper or servo
Scanius Line
Scanius Line
piezosystem jena Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 3kg
  • Height: 35mm
  • X-Axis Travel Length: 150mm
  • Y-Axis Travel Length: 72mm
  • Max. Linear Speed: 160mm/s
  • Stage Type: Motorized
  • Flatness (over 10 mm): 0,2
  • Motor Type: piezoelectric drive
  • On-axis-accuracy: 20 μrad
MT25
MT25
mechOnics AG
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 100g
  • Mass: 46g
  • Height: 30.5mm
  • Max. Rotation Speed (degrees/s): 1
  • Stage Type: Motorized
  • Driver Included?: No
  • Ambient Conditions: Standard
  • High Vacuum Preparation: 10^-6 mbar
  • Ultra-high Vacuum Prep.: 10^-9 mbar
Photonics Products

Marketplace Help Need Help?
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.