Photonics Dictionary

An acousto-optic tunable filter (AOTF) is a device that utilizes the acousto-optic effect to selectively filter and transmit light based on its wavelength or frequency. It operates by applying an...

The use of optical or electronic recording systems to extract information from the terrain, while aloft, for reconnaissance applications.

An APD detector, or avalanche photodiode detector, is a type of photodetector used to detect light or optical signals by converting incoming photons into electrical current. It operates based on the...

An argon-fluoride (ArF) excimer laser is a type of ultraviolet laser that operates using a mixture of argon and fluorine gases. Excimer lasers are a class of gas lasers that emit light in the UV...

An atomic clock is a highly precise timekeeping device that uses the vibrations or oscillations of atoms as a reference for measuring time. The most common type of atomic clock uses the vibrations of...

An attenuator is an electronic or optical device used to reduce the power or intensity of a signal without significantly affecting its waveform or other characteristics. Attenuators are commonly used...

Automated optical inspection (AOI) is a technology used in manufacturing processes, particularly in electronics, to automatically inspect and detect defects or anomalies in products. AOI systems use...

A blue diode laser is a type of semiconductor laser that emits light in the blue wavelength range of the electromagnetic spectrum, typically between 400 and 500 nanometers. Diode lasers are compact,...

Brillouin scattering is a phenomenon in physics where an incident electromagnetic wave (usually light) interacts with acoustic phonons (quantized lattice vibrations) in a material, resulting in the...

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or transmit light over a broad range of wavelengths. These mirrors are constructed...

A CCD image sensor, or charge-coupled device image sensor, is a type of electronic device used to convert optical images into electronic signals. It is a key component in digital cameras, camcorders,...

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

A deep-ultraviolet (DUV) laser is a type of laser that emits light in the deep ultraviolet region of the electromagnetic spectrum, typically with wavelengths ranging from about 200 nm down to 10 nm....

Diffractive optical processors are optical devices that utilize diffractive optics principles to perform various computational tasks, such as image processing, pattern recognition, and optical...

An edge-emitting light-emitting diode is a type of LED structure where light emission occurs primarily along the edge of the semiconductor chip rather than from the surface. Edge-emitting LEDs are...

An electro-optic deflector is a device that can change the direction of light beams using an electric field. It operates based on the electro-optic effect, which involves the modulation of the...

An electro-optic modulator (EOM) is a device used to modulate the amplitude, phase, or polarization of light waves using an external electrical signal. Electro-optic modulation is a fundamental...

A cathode-ray tube that increases the brightness or size of an image or forms a visible image from invisible radiation. The focal plane for the optical image is a large, light-sensitive, cold...

An electron-beam lithography (EBL) system is a sophisticated nanofabrication tool used in the semiconductor industry and research laboratories to pattern extremely fine features with sub-micrometer...

The term "embedded laser" typically refers to a laser device that is integrated or embedded into a larger system or structure. In this context, "embedded" implies that the laser is an integral part...

An etalon is an optical device that consists of two parallel reflecting surfaces separated by a precise and known distance. It operates based on the principle of optical interference and is used to...

The Faraday effect, named after the English scientist Michael Faraday, is a phenomenon in physics where the polarization plane of light is rotated when the light passes through a transparent medium...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A fiber optic attenuator is a passive optical component designed to attenuate or decrease the intensity of an optical signal traveling through a fiber optic link. It achieves this by introducing a...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in orientation or rotation. It operates based on the principle of the Sagnac effect,...

A fiber optic transceiver, often simply referred to as an "optical transceiver," is a device used in fiber optic communications to transmit and receive data over optical fibers. It integrates both a...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

A fiber-coupled photoconductive antenna (FCPA) is a type of optoelectronic device that combines a photoconductive antenna with optical fibers for the purpose of generating or detecting terahertz...

Fluoride fibers are optical fibers made from fluoride-based materials, typically fluoride glasses or crystalline fluoride compounds. These fibers are characterized by their unique optical properties,...

Fused quartz and silica are closely related materials, both composed primarily of silicon dioxide (SiO2), but they are produced through different manufacturing processes and have distinct properties...

A GaAlAs laser is a type of semiconductor laser diode that emits light in the near-infrared region of the electromagnetic spectrum. It is composed of layers of gallium, aluminum, and arsenic, hence...

Gallium arsenide phosphide (GaAsP) is a semiconductor alloy composed of gallium (Ga), arsenic (As), and phosphorus (P). It is commonly used in the fabrication of optoelectronic devices, particularly...

Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is...

A galvanometric scanner, also known as a galvanometer scanner or galvo scanner, is a type of optical scanning device used to rapidly and precisely direct a laser beam or other light source to...

GaN (gallium nitride) distributed feedback (DFB) lasers refer to a specific type of semiconductor laser based on Gallium Nitride materials and designed with a distributed feedback structure. These...

Germanium crystal refers to a crystalline form of the element germanium (Ge), which is a metalloid and semiconductor commonly used in various electronic and optical applications. Germanium crystals...

Graphene is a two-dimensional allotrope of carbon consisting of a single layer of carbon atoms arranged in a hexagonal lattice pattern. It is the basic building block of other carbon-based materials...

Gyroscopy refers to the principles and applications of gyroscopes, devices that measure or maintain orientation based on the principles of angular momentum. Gyroscopes are essential in various...

A holographic grating is a type of diffraction grating that is produced using holographic recording techniques. It consists of a periodic structure of alternating transparent and opaque regions,...

An electro-optic system using, in general form, an evacuated glass envelope with a semitransparent photocathode at one end and a luminescent screen at the other for the amplification of an optical...

Any form of lens, optical system (camera, telescope, microscope, etc.), or opto-electronics utilized for the purpose of producing an image of a given object.

Indium gallium arsenide (InGaAs) is a semiconductor compound composed of indium (In), gallium (Ga), and arsenic (As). It belongs to the III-V group of semiconductors and is commonly used in...

Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the...