Photonics Dictionary

A measurement technique used for the rapid quantitative evaluation of surface quality based on the detection and analysis of light scattered from the surface.

An aspheric plate placed at, or near, the center of curvature of a spherical reflector and used to correct for spherical aberration.

A Schottky diode is a type of semiconductor diode characterized by its low forward voltage drop and fast switching speed. It is formed by the junction of a metal and an n-type semiconductor, creating...

Schrödinger's cat is a thought experiment devised by the physicist Erwin Schrödinger in 1935 to illustrate the paradoxical nature of quantum mechanics, particularly the concept of...

A scientific CMOS (complementary metal-oxide-semiconductor) camera is a type of digital camera specifically designed for scientific imaging applications. It employs CMOS sensor technology, which...

Scientific complementary metal-oxide semiconductor (sCMOS) refers to a type of image sensor technology specifically designed for scientific and industrial imaging applications. Unlike traditional...

A pinhole camera used to record a radioactive tracer's distribution in a subject by means of a scintillation counter or a fluorescent screen; used when a recording emulsion is not practical.

A scintillation crystal, also known simply as a scintillator, is a material that emits light when it interacts with ionizing radiation such as gamma rays, x-rays, or charged particles. The emitted...

A scintillation detector is a radiation detection device that utilizes scintillation crystals to detect and measure ionizing radiation, such as gamma rays, x-rays, or charged particles. It consists...

An instrument used to test the hardness of various materials. It measures the pressure on a standard point that is necessary to scratch the material.

A device used to take turbidimetric or nephelometric measurements by considering the contrast between a constant brightness field and an illuminated line positioned behind the solution being tested.

A defect on a polished optical surface whose length is many times its width. Block reek is a chainlike scratch formed in polishing. A runner cut is a curved scratch caused by grinding. A sleek is a...

The process of perforating a silicon or ceramic substrate with a series of tiny holes along which it will break. Nd:YAG or CO2 lasers are now routinely used.

A nonlinear label-free imaging technique commonly used during surgical procedures for the visualization of collagen fibers and muscle tissue (myosin) with submillimeter resolution. During the...

Second-harmonic generation (SHG) is a nonlinear optical process that occurs when two photons with the same frequency combine within a nonlinear material, resulting in the generation of a new photon...

Second-order nonlinear optical properties refer to a class of phenomena exhibited by certain materials in response to intense light, typically in the realm of optics and photonics. Nonlinear optical...

In multifocal spectacles, a term used to denote glass with a high refractive index that has been fused to the blank and ground to a curvature, resulting in added power.

Seidel aberrations refer to a set of monochromatic aberrations in optical systems, named after the German mathematician and physicist Ludwig von Seidel. These aberrations describe deviations from...

Selective laser melting (SLM) is an additive manufacturing (AM) or 3D printing technology that belongs to the powder bed fusion category. SLM is primarily used for metal additive manufacturing, where...

An optically bistable device used for photonic switching, constructed of a multiple quantum well biased by an external voltage, which creates an external field that shifts the wavelength of the onset...

Any material that derives its energy from chemically or electrically induced reactions; isotope or radium excitation is used to form the glow in luminescent watch or clock hands.

Self-phase modulation (SPM) is a nonlinear optical phenomenon that occurs when an intense laser beam passes through a medium, causing a change in the phase of the light due to its interaction with...

A semiconductor is a type of material that has electrical conductivity between that of a conductor and an insulator. In other words, semiconductors have properties that are intermediate between...

A term used to describe a spectacle lens or blank with one surface totally finished.

Three filters used in making a color print of a color negative, red, green and blue-violet, respectively. Each filter transmits about one-third of the visible spectrum onto the print.

A device used in measuring attenuation in optical fiber. The loss caused by the bends in a short reference length of fiber approximates that of a much longer fiber under test.

Servo motion is the controlled motion of a mechanical system achieved through the use of a servo motor, which utilizes feedback mechanisms to ensure accurate positioning, speed, and acceleration....

A servo, short for servomechanism or servo motor, is a closed-loop control system that precisely controls the position, velocity, or acceleration of a mechanical component, typically in response to...

A handheld navigational instrument used to measure the elevation angle of celestial bodies such as the sun. An image of the sun is viewed through a small telescope via two plane mirrors so that any...

The Shack-Hartmann wavefront sensor is an optical device used for measuring the wavefront aberrations of an optical system. It is widely used in adaptive optics systems to correct distortions and...

A term used to denote a concave surface having too long a radius of curvature. That is, its negative power is too small or low.

A term used to describe a convex surface having too short a radius of curvature. To correct this condition, material is cut from the outer portion of the polishing tool.

Image distortion that occurs when the axes of the original image are not perpendicular in the resulting image, making the resulting image appear slanted. Shear can be caused by movement of the...

Short wavelength infrared (SWIR) refers to the portion of the infrared spectrum that encompasses wavelengths roughly between 1,000 and 3,000 nanometers (nm). In the electromagnetic spectrum, infrared...

A compact high-pressure light source in which an electrical discharge between electrodes spaced no more than 12 mm apart occurs in a xenon or other gas medium, providing a visible light resembling a...

A mechanical or electronic device used to control the amount of time that a light-sensitive material is exposed to radiation.

A device used to measure the opening time of a shutter. The most common devices depend on the charging or discharging of an electrical condenser, or on the production of a curve of open area against...

Frequently used in astronomical measurement, it is based on the diurnal rotation of a star relative to the fixed stellar system.

Silicon carbide (SiC) light-emitting diodes (LEDs) are semiconductor devices that emit light when an electric current is applied to them. These LEDs are made using silicon carbide as the...

A solid-state device, composed of silicon, that is used to convert radiation into electrical energy.

An abundant material found in the form of quartz and agate and as one of the major constituents of sand. The silicates of sodium, calcium, and other metals can be readily fused, and on cooling do not...

A material used as a protective layer on an aluminized or silvered mirror. It is evaporated on the mirror as a thin layer, and after exposure to the air the monoxide tends to become silicon dioxide...

A silicon photodiode is a semiconductor device that converts light into an electrical current. It is a type of photodetector specifically designed for detecting and measuring light intensity. Silicon...

A short focal length (less than five inches) positive lens used to produce a magnified image of the object being viewed. While a single element will function, an achromat or multielement assembly...

The process, used with a positive photoresist, in which the photoresist is immersed in developing chemicals while being exposed to the optical pattern. The newly exposed surface is continuously...