78 products

Optomechanics & Positioning

Clear All Filters x positioning system x Optomechanics & Positioning x

Nano-Bio
Mad City Labs Inc.

Category: Optomechanics & Positioning / Stages
Type: Nanopositioning Stage
Max. Load: 0.5kg
Control: Closed Loop
Stability: High
Type: Low profile, two axis

Premier Product

VantagePro Galvanometer Scanners
Thorlabs Inc.

Category: Optomechanics & Positioning / Galvanometers
Type: 1 Axis
Repeatablility (µrad): 20
Linearity (%): 99.88
Overall Height (no mirror): 35.7mm
Weight: 0.45kg
Housing Diameter: 9.47 mm
Max. Beam Diameter: 4 mm or 5 mm Available
Mirror Coatings Available: Protected Silver, Nd:YAG

Dual-Axis Galvanometer Scan Heads
Thorlabs Inc.

Category: Optomechanics & Positioning / Galvanometers
Type: 2 Axis
Max. Beam Diameter: 45mm
Max. Scan Angle X (degrees): 22.5
Max. Scan Angle Y (degrees): 22.5
Small Step Response (µs): 1200
Repeatablility (µrad): 10
Linearity (%): 99.9
Control Electronics: Analog Servo Amplifiers
Gain Drift: 50 ppm/°C
Mirror Substrate: Fused Silica/SiC/Si

H-811 6-Axis Motion Miniature Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 5kg
Mass: 2.2kg
Height: 11cm
X-Axis Range: 34cm
Y-Axis Range: 34cm
Z-Axis Range: 21cm

NanoScanZ Nanopositioning Piezo Z Stages
Prior Scientific Inc.

Category: Optomechanics & Positioning / Stages
Type: Nanopositioning Stage
Max. Load: 500g
Height: 21mm
Stage Type: Motorized
Accuracy and Linearity: 0.5% of travel
Operating Temperature: 5-50 °C
Repeatability: 5 nm

PZ-2000FT Series Automated Stage
Applied Scientific Instrumentation Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Max. Load: 2kg
X-Axis Travel Length: 120mm
Y-Axis Travel Length: 110mm
Max. Linear Speed: 7mm/s
Stage Type: Motorized
Driver Included?: Yes
Maximum Continuous Output: 13 mA
PZ-2150 Travel Range: 150 μm
PZ-2300 Travel Range: 300 μm

SMFCx/Six Axis Single-Mode Fiber Coupler
Siskiyou Corporation

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Height: 45mm
X-Axis Travel Length: 2mm
Y-Axis Travel Length: 2mm
Stage Type: Manual

Linear Stages
BUSCH Microsystems GmbH

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Stage Type: Motorized
Driver Included?: Yes
Max. Acceleration: 5 m/s²
Max. velocity: 0,2 m/s
Resolution of Measuring System: 100 – 1 nm

intelliSCANse
SCANLAB GmbH

Category: Optomechanics & Positioning / Galvanometers
Type: 2 Axis

LC 100 Series Sealed Linear Encoders
Heidenhain Corporation

Category: Optomechanics & Positioning / Optical Encoders
Type: Linear
Encoder Reading: Absolute
Max. Distance: 4.24m

FIREFLY3D 3-Axis Laser Scan Head
Novanta Photonics, Precision Medicine & Manufacturing

Category: Optomechanics & Positioning / Galvanometers
Type: 3 Axis
Aperture: 20 mm
Wavelength Options: 1050 nm - 1090 nm

Lightning II 2 & 3-Axis Scan Head
Novanta Photonics, Precision Medicine & Manufacturing

Category: Optomechanics & Positioning / Galvanometers
Type: 3 Axis
Aperture (2-Axis): 14, 20, 25, 30 mm
Aperture (3-Axis): 20, 30, 50 mm
Repeatability (2-Axis): < 1 µrad

MOVIA 2-Axis Laser Scan Head
Novanta Photonics, Precision Medicine & Manufacturing

Category: Optomechanics & Positioning / Galvanometers
Type: 2 Axis
Aperture: 10 mm
Repeatability: < 3.5 µrad
Scan Angle: ± 20°

VERSIA 2-Axis Hybrid Laser Scan Head
Novanta Photonics, Precision Medicine & Manufacturing

Category: Optomechanics & Positioning / Galvanometers
Type: 2 Axis
Aperture: 14 mm
Repeatability: < 2 µrad
Scan Angle: ± 21°

Multi-Axis Gantries, Cartesian Robots
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Stages
Type: Linear Stage

Miniature Linear Stages
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Stages
Type: Linear Stage

Automated Photonics Alignment Systems
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other

H-840 High Performance High Value Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 40kg
Mass: 5kg
Height: 25cm
X-Axis Range: 10cm
Y-Axis Range: 10cm
Z-Axis Range: 5cm

HexGen HEX500-350HL
Aerotech Inc.

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 200kg
Mass: 49kg
Height: 350mm
X-Axis Range: 100mm
Y-Axis Range: 110mm
Z-Axis Range: 54mm
Linear Accuracy: ±0.5 μm
Linear Resolution: 20 nm
Rotary Accuracy: ±2.5 μrad

HexGen HEX300-230HL
Aerotech Inc.

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 45kg
Mass: 12kg
Height: 230mm
X-Axis Range: 55mm
Y-Axis Range: 60mm
Z-Axis Range: 25mm
Linear Accuracy: ±0.5 μm
Linear Resolution: 20 nm
Rotary Accuracy: ±2.5 μrad

HexGen HEX150-140HL
Aerotech Inc.

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 7.5kg
Mass: 2.3kg
Height: 141mm
X-Axis Range: 40mm
Y-Axis Range: 40mm
Z-Axis Range: 16mm
Linear Accuracy: ±0.75 µm
Linear Resolution: 20 nm
Rotary Accuracy: ±7.3 µrad

precSYS 5-axis micromachining system
SCANLAB GmbH

Category: Optomechanics & Positioning / Galvanometers
Type: 3 Axis
Weight: 30kg

Galvanometer: dynAXIS3 M
SCANLAB GmbH

Category: Optomechanics & Positioning / Galvanometers
Type: 1 Axis
Small Step Response (µs): 0.4
Repeatablility (µrad): 1
Overall Height (no mirror): 74mm
Weight: 300g
Nonlinearity: <0.1%

Motorized ZDeck Quick Adjust Platform System
Prior Scientific Inc.

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Optical Mounts
ProScan Computer Interface: RS 232/USB
Spacers Provided: Four pillar spacers, four one in. spacers
Vibration Table Compatibility: 1/4-20 or 6 mm

H-845 Heavy-Duty Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Max. Load: 1000kg
Mass: 120kg
Height: 66cm
X-Axis Range: 3.4cm
Y-Axis Range: 3.2cm
Z-Axis Range: 1.3cm

intelliWELD
SCANLAB GmbH

Category: Optomechanics & Positioning / Galvanometers
Type: 3 Axis

HT1111LC ProScan Stage
Prior Scientific Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Max. Load: 100kg
X-Axis Travel Length: 108mm
Y-Axis Travel Length: 108mm
Stage Type: Motorized
Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
Minimum Step Size: 0.4 µm
Stepper Motor: 4 phase, 1 amp/phase, microstepping

ES107 OptiScan Stage
Prior Scientific Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
X-Axis Travel Length: 114mm
Y-Axis Travel Length: 75mm
Stage Type: Motorized
Driver Included?: Yes
Drive Mechanism: Anti-backlash precision lead screw
Linear Slides: 3 mm ball bearings
Repeatability: ±5 µm

OE-1250 GEN II MS-Stage
Applied Scientific Instrumentation Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
X-Axis Travel Length: 125mm
Y-Axis Travel Length: 125mm
Max. Linear Speed: 14mm/s
Stage Type: Motorized
Driver Included?: Yes
XY Axis Maximum Velocity: 7 mm /sec
XY Axis Resolution: 0.022 μm
XY Axis RMS Repeatability: < 0.7 μm

Granite Gantry Ultra-Precision XYZ Positioning System
Opton Laser International SA

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Max. Load: 30kg
X-Axis Travel Length: 1000mm
Y-Axis Travel Length: 1300mm
Max. Linear Speed: 1000mm/s
Stage Type: Motorized
Driver Included?: No
Acceleration: ≤15.000 mm/s2
Bi-direct. Repeatability: ±0.5 µm or better
Calibrated Abs. Accuracy: ±1.5 µm or better

4 DoF Pre-defined Positioning System
SmarAct GmbH

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage

Twin Gantry Open Stage
Schneeberger Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Stage Type: Motorized

SMARPOD 110.45, hexapod-like
SmarAct GmbH

Category: Optomechanics & Positioning / Hexapods
Type: Hexapod
Mass: 400g
Height: 45mm
X-Axis Range: 20mm
Y-Axis Range: 20mm
Z-Axis Range: 10mm

M3-RS-U2-4.5-360 Rotary Stage
New Scale Technologies Inc.

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage
Max. Load: 3g
Mass: 3g
Height: 16mm
Max. Rotation Speed (degrees/s): 1100
Stage Type: Motorized
Driver Included?: Yes
Accuracy: 0.25 deg
Controller: Embedded in the stage!
Encoder Resolution: ~21.9727 mdeg (Absolute)

M3-F Focus Module
New Scale Technologies Inc.

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other
Closed-loop Controller: Embedded in the module!
Housing Dimension: 20 x 22 x 16 mm
Linear Accuracy: ±30 μm

DK-M3-RS-U2-2M-20-L Beam Steering Developer’s Kit
New Scale Technologies Inc.

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage
Max. Load: 3g
Mass: 3g
Height: 16mm
Max. Rotation Speed (degrees/s): 1100
Stage Type: Motorized
Driver Included?: Yes
Accuracy: 0.25 deg
Closed-loop Controller: Embedded in the stage!
Encoder Resolution: ~21.9727 mdeg (Absolute)

M3-LS-U2-8 Linear Stage
New Scale Technologies Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Max. Load: 20g
Mass: 15g
Height: 10mm
X-Axis Travel Length: 8mm
Y-Axis Travel Length: 8mm
Max. Linear Speed: 35mm/s
Control interface: I2C or SPI or USB
Controller: Embedded in stage!
Input power: 5 V DC (4.75 V to 5.5 V)

M3-LS-3.4-15 Linear Stage
New Scale Technologies Inc.

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Max. Load: 200g
Mass: 30g
Height: 11mm
X-Axis Travel Length: 15mm
Y-Axis Travel Length: 15mm
Max. Linear Speed: 4mm/s
Closed-loop Controller: Embedded in the stage!
Force: 1 N
Length × Width x Height: 32 x 32 x 11 mm

intelliSCAN IV
Scanlab America Inc.

Category: Optomechanics & Positioning / Galvanometers
Type: 2 Axis

Alloy 30 Lens Tube
ALLVAR

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Lens Tubes
CTE: -30ppm/°C
Material: ALLVAR Alloy 30
Thread: SM1 (1.035"-40)

Rotary Motion Systems
ALIO Industries LLC

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage
Max. Load: 40kg
Max. Rotation Speed (degrees/s): 5500
Stage Type: Motorized

Linear Motion Systems
ALIO Industries LLC

Category: Optomechanics & Positioning / Stages
Type: Nanopositioning Stage
Max. Load: 80kg
X-Axis Travel Length: 450mm
Y-Axis Travel Length: 450mm
Max. Linear Speed: 1m/s
Stage Type: Motorized

Mirror Tilting System - PSH
piezosystem jena Inc.

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage
Max. Load: 100g
Mass: 350g
Height: 40.5mm
Stage Type: Motorized
Driver Included?: Yes
Axes: X, Y
Nonlinearity: 0.002%
Resolution Closed Loop: 0.02 μrad

Copper Thermal Straps
Technology Applications Inc. (TAI)

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other
Mass: 30g - 1kg
Price: $200 - $1,500
Thermal Conductance: 0.1 - 2.0 W/K

Graphite Thermal Straps
Technology Applications Inc. (TAI)

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other
Mass: 15 g - 100 g
Price: $1,000 - $5,000
Thermal Conductance: 0.1 - 2.0 W/K

Motorized Lens Actuator
MPS Micro Precision Systems AG

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other

Custom Optomechanical Systems
JENOPTIK Optical Systems LLC, Advanced Photonic Solutions

Category: Optomechanics & Positioning / Other Optomechanics / Positioning
Type: Other

precSYS 5-axis
Scanlab America Inc.

Category: Optomechanics & Positioning / Galvanometers
Type: 3 Axis
Weight: 30kg

Motorized Gimbal Mounts
Optimal Engineering Systems Inc.

Category: Optomechanics & Positioning / Stages
Type: Rotation Stage
Max. Load: 20kg
Mass: 24kg
Height: 60cm
Max. Rotation Speed (degrees/s): 90
Stage Type: Manual,Motorized
Driver Included?: No
Motor Type: Stepper and Servo
Range of Travel: 360° Continuous on All Axes
Table Size: Diam: 3.937 in. (100 mm)

DLS Hybrid-Drives
SmarAct GmbH

Category: Optomechanics & Positioning / Stages
Type: Linear Stage
Mass: 50g
Height: 12mm
X-Axis Travel Length: 21mm
Max. Linear Speed: 20
Stage Type: Motorized
Scan Range: > 10 µm

Optomechanics & Positioning Products