An implantable thin-film system can deliver drugs to specific targets in the body by disintegrating when an electric field is applied. The film developed at the Massachusetts Institute of Technology serves as a "micropharmacy" and could eventually be used to deliver drugs for cancer, epilepsy, diabetes and other diseases. It is among the first drug-delivery coatings that can be remotely activated by applying a small electric field. “You can mete out what is needed, exactly when it's needed, in a systematic fashion,” said Paula Hammond, the Bayer Professor of Chemical Engineering and senior author of a paper on the work appearing in the Feb. 11 issue of the Proceedings of the National Academy of Sciences.The film, which is typically about 150 nanometers (billionths of a meter) thick, can be implanted in specific parts of the body. It is made from alternating layers of two materials: a negatively charged pigment and a positively charged drug molecule, or a neutral drug wrapped in a positively charged molecule. Showing the thin film they have developed are (l-r) postdoctoral associate Kris Wood of the Broad Institute of MIT and Harvard, MIT Bayer Professor of Chemical Engineering Paula Hammond, and chemical engineering graduate student Dan Schmidt. The film releases drugs and other chemical agents upon application of a small electrical field. (Image courtesy MIT) The pigment, called Prussian blue, has been determined by the US Food and Drug Administration to be safe for use in humans. It sandwiches the drug molecules and holds them in place. When an electrical potential is applied to the film, the Prussian blue loses its negative charge, which causes the film to disintegrate, releasing the drugs. The amount of drug delivered and the timing of the dose can be precisely controlled by turning the voltage on and off. The electrical signal can be remotely administered (for example, by a physician) using radio signals or other techniques that have already been developed for other biomedical devices. The films can carry discrete packets of drugs that can be released separately, which could be especially beneficial for chemotherapy. The research team is now working on loading the films with different cancer drugs. Eventually, devices could be designed that can automatically deliver drugs after sensing that they're needed. For example, they could release chemotherapy agents if a tumor starts to regrow, or deliver insulin if a diabetic patient has high blood sugar. “You could eventually have a signaling system with biosensors coupled with the drug delivery component,” said Daniel Schmidt, a graduate student in chemical engineering and one of the lead authors of the paper. Other lead authors are recent MIT PhD recipients Kris Wood, now a postdoctoral associate at the Broad Institute of MIT and Harvard, and Nicole Zacharia, now a postdoctoral associate at the University of Toronto. Because the films are built layer by layer, it is easy to control their composition. They can be coated onto a surface of any size or shape, which offers more design flexibility than other drug-delivery devices that have to be microfabricated. “The drawback to microfabricated devices is that it's hard to coat the drug over a large surface area or over an area that is not planar,” said Wood. Another advantage to the films is that they are easy to mass-produce using a variety of techniques, said Hammond. These thin-film systems can be directly applied or patterned onto 3-D surfaces such as medical implants. Stefani Wrightman, a 2006 MIT graduate, and Brian Andaya, a recent graduate of the University of Rochester and summer intern at the MIT Materials Processing Center, are also authors on the paper. The research was funded by the National Science Foundation, the Office of Naval Research and MIT's Institute for Soldier Nanotechnologies. For more information, visit: www.mit.edu