Search
Menu
DataRay Inc. - ISO 11146-Compliant Laser Beam Profilers

Researchers Develop Open-Source Modular Microscope

Facebook X LinkedIn Email
Researchers from the Leibniz Institute of Photonic Technology (Leibniz IPHT), Friedrich Schiller University, and Jena University Hospital developed a low-cost modular microscope that has the potential to greatly expand access to high-resolution microscopic imaging technology.

The basic building block of the system, the UC2 (You See Too), is a 3D-printed cube with an edge length of 5 cm that can host a variety of components including lenses, LEDs, and cameras.
The open-source 3D-printed cube can host self-designed inserts, electrical and optical components. The resulting modules can be combined to form complex optical instruments. Courtesy of UC2.
The open-source 3D-printed cube can host self-designed inserts and electrical and optical components. The resulting modules can be combined to form complex optical instruments. Courtesy of UC2.

The device's modular nature enables adaptability to the needs of specific research, said Leibniz IPHT Ph.D. student Benedict Diedrich.

“With our method,” he said, “it is possible to quickly assemble the right tool to map specific cells. If, for example, a red wavelength is required as excitation, you simply install the appropriate laser and change the filter. If an inverted microscope is needed, you stack the cubes accordingly.”

Low cost and easy reproducibility are other advantages of the device, Diedrich said. “Commercial microscopes that can be used to examine pathogens over a longer period of time cost hundreds or thousands of times more than our UC2 setup. You can hardly get them into a contaminated laboratory from which you may not be able to remove them because they cannot be cleaned easily.” 

Sheetak -  Cooling at your Fingertip 11/24 MR

The researchers published construction plans and software on GitHub, a freely accessible online repository, so that the open source community can access, expand, and modify the presented systems. “With the feedback from users, we improve the system step by step and add ever-new creative solutions,” said René Lachmann, a Ph.D. student at Leibniz IPHT who helped develop the system.

Another benefit of the modular system is the ability to teach simple optical concepts to generate student interest in optical science. To that end, the researchers developed a sophisticated tool set for educational purposes in schools and universities: With “The Box,” UC2 introduces a kit that enables users to learn about and try out optical concepts and microscopy methods.

“The components can be combined to form a projector or a telescope; you can build a spectrometer or a smartphone microscope,” said Barbora Maršíková, who developed experiments and a series of ready-to-use documentations that the UC2 team has tested in a number of workshops.

“We want to make modern microscopy techniques accessible to a broad public and build up an open and creative microscopy community,” Diedrich said.

The research was published in Nature Communications (www.doi.org/10.1038/s41467-020-19447-9).


Published: November 2020
Glossary
3d printing
3D printing, also known as additive manufacturing (AM), is a manufacturing process that builds three-dimensional objects layer by layer from a digital model. This technology allows the creation of complex and customized structures that would be challenging or impossible with traditional manufacturing methods. The process typically involves the following key steps: Digital design: A three-dimensional digital model of the object is created using computer-aided design (CAD) software. This...
microscope
An instrument consisting essentially of a tube 160 mm long, with an objective lens at the distant end and an eyepiece at the near end. The objective forms a real aerial image of the object in the focal plane of the eyepiece where it is observed by the eye. The overall magnifying power is equal to the linear magnification of the objective multiplied by the magnifying power of the eyepiece. The eyepiece can be replaced by a film to photograph the primary image, or a positive or negative relay...
Research & TechnologyMicroscopylow cost3d printing3D printed microscopemodularNature CommunicationsLeibnizLeibniz InstituteLeibniz Institute of Photonic TechnologiesLeibniz Institute of Photonic TechnologyLeibniz IPHTFriedrich SchillerFriedrich Schiller UniversityFriedrich Schiller University JenaJena University HospitalUC2microscopeeducationeducationalBioScan

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.