Vision Software:

The physical parameters and versatility of femtosecond sources help to facilitate operations that are beyond the reach of more conventional laser technologies. As emitters of high-intensity,...

Far above an oil pipeline, a drone bobs and weaves. The drone, dispatched by Denver, Colorado-based Project Canary, is collecting high-resolution imaging data of the site, while also scanning for any...

Laser micromachining has proved to be revolutionary in modern manufacturing, enabling the creation of intricate features at the micro- and nanoscale. Laser micromachining and microprocessing envelop...

More than 30 years ago, acclaimed physicist Edward Teller said, “No one should use a laser unless it’s a diode laser.” Although those of us engaged in the manufacture of laser...

The SPL PL90AT03 IR laser diode from ams OSRAM offers 75-W peak power and narrow 110-µm aperture for performance in long-distance lidar and time-of-flight sensing applications. A...

The GLX60AC family from Laser Tools Co. are high-power laser emitters used for creating laser lines, illuminating pathways, and creating overhead crane exclusion zones. The laser modules use a...

Custom air bearing motion systems from Physik Instrumente LP are designed to enhance performance in various industrial applications such as photonics, medical design, aerospace, and semiconductors....

The Monaco 345-25-50 industrial UV femtosecond laser from Coherent Corp. features 50 W of output power. The 400-fs laser is designed for high-speed, high-volume cutting of wafers and stacked...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

The use and importance of colorimetry has grown in unison with the increase of global manufacturing and processing. When plastic automotive trim produced on one continent must match a painted metal...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

Imaging has long been used in industrial processes to measure, monitor, control, or otherwise manage the production of goods. The challenge to the process designer is to develop a tool that captures...

Telecentric F-theta lenses with large scan fields set new standards for cutting displays.

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

The ILMS is designed for profiling focused, high-power industrial lasers. This system combines reimaging/magnification optics, a polarization preserving beam sampler, and a DataRay beam profiler to...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

Deploying supervised learning methods for automated optical inspection (AOI) of semiconductor wafers and other materials enables process engineers to detect defects on bare and patterned samples...

The development of laser welding technology has seen significant advancements in recent years. With the introduction of dynamic beam lasers based on coherent beam combining (CBC), new possibilities...

The discrete electronic energy levels in atoms and atom-like systems and the ability to probe and control them using their interactions with electromagnetic fields have enabled a host of applications...

Andrew Bodkin, founder of Bodkin Design & Engineering, shares a technical overview of the process of machine vision sensing based on his 30 years of experience in electro-optics, custom...

A confocal resonator, also known as a confocal cavity or confocal laser resonator, is a type of optical resonator configuration used in laser systems. The term confocal in this context refers to the...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A read-out integrated circuit (ROIC) is an electronic device used in imaging systems, particularly in infrared (IR) and other sensing technologies. It is designed to interface with an array of...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

The new VirtualLab Fusion 2023 thrills with a firework of new features. In this webinar we give an overview of the new features and put them into context with the development strategy and technical...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

A line-scan camera is a type of digital camera designed to capture images one line or row of pixels at a time, rather than a full two-dimensional frame in a single exposure. Learn more about...

A digital camera is a device that captures and records still images or video in digital format. Unlike traditional film cameras, which use photographic film to capture and store images, digital...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Cameras are indispensable in automation. With more than 25 years of experience and subsidiaries in the USA, Japan, South Korea and the UK as well as offices in Europe and Asia, IDS Imaging...