UDC to Provide OLED Materials

Edmund Optics established a 34,000-sq-ft laser optics center in Oldsmar, Fla. The center is dedicated to manufacturing optical components with high laser damage thresholds from the ultraviolet to the...

A research team from imec has developed perovskite-based LEDs that emit light 1000× brighter than OLEDs. According to the researchers, the advancement is a pivotal milestone toward a perovskite...

Electrical cochlear implants (eCIs) are effective at restoring hearing when used in a quiet environment. However, eCIs do not work as well in noisy surroundings and they are unable to fully capture...

With the development of a single-layer, blue-emitting OLED, researchers at the Max Planck Institute (MPI) for Polymer Research demonstrated that one-layer OLEDs can achieve a performance level...

The SFT-03X chipset from Luminus Devices is a red-green-blue (RGB) LED for industrial and consumer applications such as AR wearable displays, companion projectors for smartphones, screenless...

The SST-08H-UV from Luminus Devices is a high-power UV-A LED for applications such as horticulture, curing inks, medical instrumentation, fluorescence imaging, disinfection, and flashlight...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

The ISMS-30-VAS from Gigahertz-Optik is a dual use integrating (sampling) sphere light source for reflection measurements on flat, convex, and concave displays and annulus design for separating...

The market for flat panel displays (FPDs) has undergone tremendous growth, driven mostly by increased demand for televisions, cell phones, computers, digital cameras and MP3 players. Similarly,...

High-brightness LEDs have found their way into applications such as signs and displays, cell phone flash modules, automotive lighting and general illumination. Some applications, however, such as...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

This application note demonstrates the use of ATR-FTIR spectroscopy for the analysis of human serum albumin. An IR5 FTIR spectrometer was used, equipped with a heated ATR accessory, to help tackle...

This technical white paper describes how tunable bandpass filters with wide and deep out-of-band blocking can be built using continuously variable edge filters combined with homogeneous blocking...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

Barry Young, CEO of the OLED Association and an authority on the technology, presents a broad look at display applications utilizing OLEDs. In 2015, OLED displays had revenues of US$13.5b and it is...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Microdisplays are essential for wearable AR/VR/MR devices, such as smart glasses. Emissive microdisplays, such as OLEDs or micro-LEDs, provide significant advantages in terms of form factor and power...

Success in a specific market depends on meeting the right technical requirements. As demand increases, it becomes necessary to develop and establish new manufacturing processes to produce functional...

Optoelectronics is a branch of electronics that focuses on the study and application of devices and systems that use light and its interactions with different materials. The term "optoelectronics" is...

An active matrix organic light-emitting diode (AMOLED) display is a type of flat-panel display technology that combines the active matrix addressing scheme with organic light-emitting diodes (OLEDs)....

An LED (light-emitting diode) is a semiconductor device that emits light when an electric current passes through it. LEDs are commonly used for lighting, displays, and indicators. A NanoLED is on the...

Fluorescence and phosphorescence spectroscopy are techniques used to study the emission of light (photons) by molecules following their excitation by external energy sources. While both processes...

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

On this month's episode of Light Matters, we introduce you to a green energy company that is transforming China's national treasure — the giant panda — into panda-shaped solar farms. We also bring...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

An organic light-emitting diode is a type of LED technology that utilizes organic compounds to produce light. OLEDs are commonly used in display technologies, such as television screens, computer...

A microlens array is a grid-like structure composed of numerous small lenses, typically arranged in a regular pattern. Each individual lens in the array is referred to as a microlens. These...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Opto Diode Corporation (Camarillo, CA), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs,...

A History of Quality Since 1974 Glass Fab Inc. has met customers' stringent specifications by providing fabricated parts made of optical glass, filter glass, fused quartz and fused silica, low...