Terry Copeland Gets Top Post at Altair Nanotechnologies

DARPA has selected three teams, led by RTX Corp., Draper, and BEAM Co., to develop wireless optical power relays for its Persistent Optical Wireless Relay (POWER) program. The program, which will...

To assist in the reduction of plastic waste, an international research team led by the University of Texas at Austin (UTA) developed a method that uses a low-power laser to initiate carbon-hydrogen...

According to the U.S. Department of Energy (DOE), a data center can consume up to 50× more energy per square foot of floor space than a typical office building. Data centers account for roughly...

The U.S. Naval Research Laboratory (NRL) completed its launch of the Space Wireless Energy Laser Link (SWELL), an experiment to demonstrate laser power beaming in space as part of the scheduled U.S....

GlacialPower’s GP-CVP150P Terminal Blocks (IP20) series LED constant voltage driver supports the universal AC input range from 90 to 264VAC. The drivers are designed with active power factor...

The Linea™ HS2 family from Teledyne DALSA is a family of TDI line scan cameras for life science applications and the inspection of semiconductor wafers, high density interconnects, and flat...

The CellDrop FLi from DeNovix is an automated cell counter for measuring tissue culture, primary cells, and nuclei. The cell counter includes six cell counting applications such as fixed samples,...

The Nano Scan OP800 piezo objective scanner from Prior Scientific Inc. features a mechanical design and integral capacitive feedback for positioning accuracy. Stiff construction allows the...

Just as an electronic connector provides a pluggable connection between electronic circuits, a fiber optic connector provides an optical one. The goal is joining a fiber to a transmitter, receiver or...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Superresolution optical microscopy, for which the Nobel Prize was awarded to Eric Betzig, Stefan Hell, and William Moerner in 2014, has been one of the most momentous developments in the life...

By its original definition, a nanopositioning device is a mechanism capable of repeatedly delivering motion in increments as small as one nanometer. Lately demands from industry and research have...

Optical filters are essential components in a wide range of applications, from life sciences and industrial inspection to environmental monitoring and consumer electronics.

How to achieve high-performance 7-channel multiplex imaging, with Kromnigon’s multiband filter technology and CoolLED’s precision-controlled LED illumination.

Overview of PZ-2000 FT.

XYZ Tracker keeps a specimen in the field of view and in focus. It uses ASI’s Tunable Lens and a secondary camera to gather images from different focal planes without moving the objective or sample....

Free Webinar Additional Questions & Answers from the Webinar below: Speakers: Dr. Robert R. McLeod Associate Professor and Graduate Director Electrical, Computer and Energy...

One of the most challenging decisions when designing a scientific imaging setup is determining the best possible CMOS sensor for the job. The origin of this challenge stems from the fact that imaging...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Fluorescence microscopy has revolutionized life sciences by enabling researchers to study biological samples with exceptional precision. New excitation and illumination light sources and scientific...

Fluorescence correlation spectroscopy (FCS) is a powerful analytical technique used to study the dynamics and interactions of fluorescently labeled molecules in solution at the single-molecule level....

Emission spectroscopy is a technique used to study the emission of electromagnetic radiation (light) by atoms, molecules, or ions when they undergo transitions from excited states to lower energy...

A diode laser is a type of laser that uses a semiconductor diode as the active medium to generate coherent light. Semiconductor diodes are electronic devices that conduct electricity primarily in one...

Ablation laser systems are specialized devices that use laser energy to remove material from a surface through a process called ablation. This process involves the absorption of laser energy by the...

MoviTHERM's Solar-CHECK solution uses lockin thermography to inspect for electrical shunts and other defects in thin-film as well as in thick-film photo-voltaic cells. The cells can either be excited...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

Laser World of Photonics — sponsored by Messe München International — provides a spotlight for promising newcomers, industry veterans and innovative companies. And with tens of thousands of people...

A photodiode is a two-electrode, radiation-sensitive junction formed in a semiconductor material in which the reverse current varies with illumination. Photodiodes are used for the detection of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

Opto Diode Corporation (Camarillo, CA), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs,...

LaserPoint manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy. They developed the hard coatings to absorb the laser radiation which...