Omicron Names Distributor

Building on an existing multiyear R&D pursuit to establish technology that produces laser pulses at 250 J with a repetition rate of 10 Hz, Hamamatsu Photonics has developed a laser system that...

University of California, Riverside (UCR) researchers have designed a composite material that offers powerful photon upconversion capabilities and that could support a range of light-driven...

Dementia is difficult to diagnose during the initial stages of the disease. Using current testing methods, it can take over two years for patients to receive a diagnosis. Many patients are not...

Photoimmunotherapy targets cancer cells with microscopic, nano-engineered cancer drugs that are light-activated at the lesion site. Although the technology is increasingly used to treat metastatic...

The GLX60AC family from Laser Tools Co. are high-power laser emitters used for creating laser lines, illuminating pathways, and creating overhead crane exclusion zones. The laser modules use a...

The LVCM-025-029-02 and LVCM-025-029-02M miniature linear voice coil servo motors from Moticont are 1-in. diameter brushless devices. The high-speed devices offer high force-to-size ratios,...

The F.0100-ir marking system from FOBA creates deep black markings on medical stainless steel, titanium, or plastics using an ultrashort-pulse laser. Its adjustable pulse width and its 10-W...

The HVCM-051-032-013-01 Linear Voice Coil Motor from Moticont features a high force-to-size ratio and a 19.1-mm stroke. The low-inertia, high-speed, hollow core brushless servo motor is clean,...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

Conditions on the factory floor and in industrial cleanrooms with high-capacity air filtration systems can hamper the use of interferometry. Another problem is the testing of large-aperture mirrors...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

With the understanding of aspheric lens manufacturing provided in part one of this article, designers have the tools to optimize their aspheres; the next step is to understand how to specify and...

The FISBA READYBeam™ is our answer to customers' increasing demand for compact, powerful, and reliable multicolor laser source that can be easily integrated into existing set-ups. The multicolor...

This article outlines the various factors which contribute to the successful manufacturing of vacuum windows. The understanding and use of cutting-edge technology, quality control via...

This white paper will identify the specifications that can influence the scanner’s field of view and also highlight hardware and controller-oriented solutions for improving it. Key topics include:...

Protecting food crops is vital to the world’s food chain, and pesticides are a critical tool to kill, repel, and control pests. One method to reduce the dangers of pesticides is limiting the allowed...

Fluorescence imaging is a key technique in both biomedical research and clinical diagnosis. Fluorescence-based microscopy for high-resolution and high-throughput multifluorophore imaging typically...

Light-sheet fluorescence microscopy (LSFM) has generated significant interest in the biological community. Not only does it deliver light to only the in-focus portion of a specimen, decreasing the...

Femtosecond frequency combs represent unparalleled measurement tools with diverse applications in spectroscopy, metrology, and quantum physics. This discussion delves into the critical aspects of...

The interaction between photons and acoustic phonons within materials, first described by Leon Brillouin, has been widely investigated to characterize the mechanical and physical properties of...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

Micromachining laser systems are advanced tools that use laser technology to perform highly precise material removal and modification at micro and nanoscales. These systems enable the fabrication of...

A multiline laser system refers to a type of laser that is capable of emitting multiple discrete wavelengths or spectral lines simultaneously. Unlike single-line lasers, which produce radiation at a...

A pump laser is a type of laser used to provide the necessary energy to the gain medium of another laser or laser system, initiating the process of stimulated emission and producing laser light. The...

Lumispot Technology Group is headquartered in Suzhou Industrial Park, with registered capital of CNY 73.83 million and an office and production area of about 14,000 square meters. We have set up...

Established in 1990, Applied Scientific Instrumentation is a reknown American company committed to the advancement of science. ASI products have been thoroughly tested and evaluated in numerous labs...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

Omicron-Laser has been developing, manufacturing and distributing innovative laser and LED light sources since 1989. With a highly qualified team based in Germany, Omicron is specialized in...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Avantier Inc. is an unparalleled leader in providing innovative imaging systems solutions and optical systems solutions. We offer advance precision custom optical design, optical engineering...

AKELA Laser Corporation is a leading manufacturer of high-powered diode lasers specializing in custom laser diode products with wavelengths in any combination from 375 nm to 12 µm and output...