Intune Reduces Tunable Laser Calibration Time Even Further

Ultrafast optical imaging is typically measured in picoseconds, whereas high-speed electronic cameras image at the millisecond and microsecond timescale. To bridge the gap between these technologies,...

Scientists from Brookhaven National Laboratory showed that ionic liquids provide an efficient means to convert one color of laser light into another. The discovery could lead to a way to create...

The hunt is on for better gas analyzers, driven by growing demands. For instance, hydrogen sulfide, an industrial byproduct, has a permissible worker exposure limit of 20 parts per million (ppm) in a...

In cell biology and medical imaging, the targeted manipulation of cells under controlled conditions is a major challenge in understanding processes and causal relationships. Researchers are dependent...

The Tunable Laser System from Spectrolight Inc. is an all-in-one tunable light source system that enables precise selection of a broad spectral range from 410 to 1650 nm and easy bandwidth adjustment...

The SPA-100 O-Band Swept Photonics Analyzer from Santec leverages the sweeping range of a tunable laser to maintain a high resolution reflectometer (<6 µm). Previously only available in a CL...

The Laser 2000 series swept tunable laser from Quantifi Photonics Ltd. is a compact, laboratory-grade device that can be operated as a step-tuned, swept-wavelength, or fixed-wavelength...

Chilas BV’s compact narrow-linewidth widely tunable laser module is suitable for a range of sensing applications like structural health monitoring using Fiber Bragg gratings, lidar, optical...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Laser diodes vary widely in their wavelengths, powers, spectra and beam quality. Yet they share two fundamental components with all other lasers: an optical amplifier and a resonator that confines...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

Early fiber lasers were inefficient and limited to low powers, until more effective methods emerged to deliver the pump light into the cladding. Valentin Gapontsev, founder and CEO of IPG Photonics,...

Everything you need to know about soldering, mounting, thermal management, drive current, environment, and more, regarding extending the lifetime of your laser diodes.

OPTOMAN takes innovation very seriously and makes sure that optical components are able to resist the ongoing increase of laser power and decrease in pulse duration, thus high LIDT is OPTOMAN‘s bread...

An in-depth look at the advancements in quantum computing and the use of lasers from the team at the Bernien Lab at the University of Chicago. The team builds quantum computers out of individual...

A laser safety program is the cornerstone of any organization using Class 3B and 4 laser systems. Management is responsible for ensuring the safe use of lasers owned and operated under its control....

Femtosecond lasers for two-photon excitation microscopy now feature tunable repetition rates, optimizing the energy-to-average-power ratio for superior imaging performance. These tunable lasers allow...

Broadband tunable lasers have long been considered essential for scientific research in fields such as fluorescence imaging and material science. Their versatility stems from their ability to cover...

This presentation by Excelitas Technologies® discusses the introduction and integration of swept vertical-cavity surface-emitting lasers (VCSELs) to address challenges in OCT imaging. OCT has...

First realized in 1994 by Bell Labs, quantum cascade lasers (QCLs) enable rapid advancements in academic, industrial, and defense applications. QCLs are now available in a diverse range of commercial...

Laser parameters are the characteristics that define the behavior and performance of a laser. These parameters can be categorized into several groups: spatial, temporal, spectral, and operational. ...

A spectroscopic technique in which an excitation band absorbs laser energy resulting in an electronic transition. The isotopic species may then be measured using a time of flight mass spectrometer....

Spectroscopy laser systems are specialized setups that utilize lasers to study the interaction between light and matter. These systems are integral to various scientific and industrial applications...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

A research team in Zurich breaks an ultrashort-pulse laser record. The ETH Zurich team lead by Ursula Keller is behind that breakthrough. PhotonDelta launches a PIC-based contest that could land one...

SNORQL Project overview - The key objective for the Space-certified Nonlinear Optical Rugged Quantum Lasers (SNORQL) project is to produce the world’s first ruggedized, packaged frequency doubling...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

The Frankfurt Laser Company's image video highlights its journey from its founding to becoming a leader in laser technology. The video showcases the company's growth, innovation, and commitment to...

Laser tubes and bores are devices, usually made of glass or a similar material, that contain the resonant cavity and optics of a gas laser.

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

LASER SAFETY • Eyewear • Barriers • Windows • Training laservision USA designs and manufactures a comprehensive assortment of custom-made laser safety eyewear that attenuates...