Intel Sells Division for $85 Million

The hunt is on for better gas analyzers, driven by growing demands. For instance, hydrogen sulfide, an industrial byproduct, has a permissible worker exposure limit of 20 parts per million (ppm) in a...

Scientists from Brookhaven National Laboratory showed that ionic liquids provide an efficient means to convert one color of laser light into another. The discovery could lead to a way to create...

Ultrafast optical imaging is typically measured in picoseconds, whereas high-speed electronic cameras image at the millisecond and microsecond timescale. To bridge the gap between these technologies,...

Optatec, the international trade fair for optical technologies, components, and systems, returns to Messe Frankfurt May 14-16. Its 16th iteration, the event retains its focus on optoelectronics,...

The SPA-100 O-Band Swept Photonics Analyzer from Santec leverages the sweeping range of a tunable laser to maintain a high resolution reflectometer (<6 µm). Previously only available in a CL...

The TLS-Red (shown) and TLS-Blue from Spectrolight Inc. are tunable laser systems that combine a supercontinuum laser and a tunable bandpass filter for fields that require precise scanning and fields...

The new product range of tunable dye and Ti:sapphire lasers from Opton Laser International in collaboration with Sirah Lasertechnik covers nano-seconds pulsed dye lasers, narrow-linewidth ring dye...

The Tunable Laser System from Spectrolight Inc. is an all-in-one tunable light source system that enables precise selection of a broad spectral range from 410 to 1650 nm and easy bandwidth adjustment...

Laser diodes vary widely in their wavelengths, powers, spectra and beam quality. Yet they share two fundamental components with all other lasers: an optical amplifier and a resonator that confines...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Finding the ideal ultra-fast laser source for a multiphoton imaging setup is not trivial. It is a fine balance between peak power, pulse energy and laser wavelength. In this white paper we show that...

This white paper will identify the specifications that can influence the scanner’s field of view and also highlight hardware and controller-oriented solutions for improving it. Key topics include:...

Optical products, traditionally used for visible light tasks, are moving aside to make room for more specialized optical components that are being manufactured for use in ultraviolet (UV) and...

The whitepaper describes how femtosecond pulses from a Menhir Photonics MENHIR-1030 seeder can easily be amplified using the modular neoYb amplifiers from neoLASE. The advantages of the presented...

First realized in 1994 by Bell Labs, quantum cascade lasers (QCLs) enable rapid advancements in academic, industrial, and defense applications. QCLs are now available in a diverse range of commercial...

Swept-source optical coherence tomography (SS-OCT) system performance is primarily determined by the rapid tuning speed and wide tuning bandwidth of the swept laser source, as well as the...

Femtosecond lasers for two-photon excitation microscopy now feature tunable repetition rates, optimizing the energy-to-average-power ratio for superior imaging performance. These tunable lasers allow...

This presentation by Excelitas Technologies® discusses the introduction and integration of swept vertical-cavity surface-emitting lasers (VCSELs) to address challenges in OCT imaging. OCT has...

A spectroscopic technique in which an excitation band absorbs laser energy resulting in an electronic transition. The isotopic species may then be measured using a time of flight mass spectrometer....

Laser parameters are the characteristics that define the behavior and performance of a laser. These parameters can be categorized into several groups: spatial, temporal, spectral, and operational. ...

Spectroscopy laser systems are specialized setups that utilize lasers to study the interaction between light and matter. These systems are integral to various scientific and industrial applications...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

In this month's Light Matters Extra, we introduce you to Drake Anthony, aka styropyro. Drake, 25, has been building his own lasers since he was 12 years old. He's got quite the following on his...

Tune into this month’s edition of Light Matters for the complete list of Photonics Media’s Industry Beacon award winners. We’ll also introduce you to an Industry Beacon in the Educator category, and...

In this month’s Light Matters Extra, we take you to the Springfield Technical Community College campus and introduce you to Professor Nick Massa, who has been teaching Optics and Photonics there for...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

We are a manufacturer of Diffraction Limited Fiber Coupled Laser Systems, Optical Systems, and Fiber Optic Systems from 240 nm to 6000 nm. Unique products include various sizes of Fiber Collimators,...