Industry Consortium Forms to Drive New Standard for Optical Laser Sources

Valens Semiconductor and Leopard Imaging have partnered to design a camera module that will allow automotive OEMs and Tier 1s to significantly reduce time to market for systems built on the A-PHY...

MICROOLED, a manufacturer of high-resolution, low power consumption OLED microdisplays, raised €21 million ($23.6 million) in a fundraising round. MICROOLED is targeting microdisplay...

During the International Vision Standards Meeting in Tokyo, the GenICam working group elected Michael Schmidt chair of the standard working group. Schmidt leads a camera development team at Basler...

The Air Force Maui Optical and Supercomputing site’s Advanced Electro-Optical System, or AEOS, the Department of Defense’s largest telescope, measuring 3.6 m, has been recoated. Results...

The FISBA READYBeam™ is our answer to customers' increasing demand for a compact, powerful, and reliable multicolor laser source that can be easily integrated into existing set-ups. The...

The LED-based standard BN-LLSF-2P from Gigahertz-Optik is suited for calibrations of photometers according to document CIE 251:2023 published in February 2023, and matches CIE Reference Spectrum L41...

The MRSI-A-L from MRSI Systems is an active aligner for optical packing solutions including fiber and lens attachments for transceivers, silicon photonics, AWGs, lidar, and integrated optics. The...

META® holoOPTIX® Notch Filters from Edmund Optics Inc. and Meta Materials Inc. are large, flexible holographic notch filters. The devices maintain consistent notch center wavelengths...

Unlike an edge emitter, a VCSEL has a maximum operating power that is not limited by catastrophic optical damage of the exit aperture because its aperture is larger and its PN junction does not...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Measuring pulsed-beam lasers has generally required the use of a CCD array profiler. This is a reasonable solution for low-power lasers in the UV and visible wavelength range, but these require...

The datasheet highlights the importance of optical components in the aerospace industry, emphasizing the critical role of materials and substrates in ensuring high precision under harsh conditions....

A key task faced by engineers using nonlinear crystals is the correct selection and effective specification of the appropriate NLO crystal for a particular laser design or application. GAMDAN Optics...

OPTOMAN takes innovation very seriously and makes sure that optical components are able to resist the ongoing increase of laser power and decrease in pulse duration, thus high LIDT is OPTOMAN‘s bread...

Optical products, traditionally used for visible light tasks, are moving aside to make room for more specialized optical components that are being manufactured for use in ultraviolet (UV) and...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Every photonics application aims toward quality, precision, and speed. The latter improves performance and reduces costs for market advantage. This improvement in speed requires the efficient use of...

Hair-thin strands of glass, intrinsically transparent and strong, connect today’s world in ways that were unimaginable even 20 years ago. Over the past 50 years, glass optical fibers have...

There are several technologies used to locate and/or measure leaks. Each may have advantages in terms of cost, sensitivity, repeatability, or ease of application. In this webinar, Agilent...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

Design and engineering consulting services refer to professional services provided by specialized firms or individuals to assist clients in various aspects of product development, system design, or...

A display standard no longer in use and originally defined for IBM PCs, with 640 3 480 pixels in 16 colors and a 4:3 aspect ratio. There is also a text mode with 720 3 400 pixels. The standard has...

Lapping and polishing services involve specialized processes used to improve the surface finish and dimensional accuracy of components to meet specific requirements or standards. These services are...

As a leader in the laser system and LED light sources business, Omicron-Laser has been developing, manufacturing, and distributing innovative laser and LED light sources since 1989. Omicron offers CW...

At the exhibition, BWT exhibited more than 20 types of diode lasers, fiber lasers, and ultrafast lasers.

Technology Transfer Programs are often a concerted effort to share skills, knowledge, technologies, methods of manufacturing, samples of manufacturing, and facilities among governments or...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

Since 1975 Valley Design Corp. has been an industry leader in advanced materials processing, as providers of precision lapping, polishing, dicing, 4- and 5-axis CNC machining, grinding, core drilling...

BWT specializes in developing and manufacturing high performance diode laser components and subsystems. As a leading supplier of fiber coupled diode lasers, BWT Beijing provides the lasers in a wide...

With over 40 years of experience, Andover Corporation is a recognized world leader in the manufacture of high-quality optical coatings and optical filters. We have an extensive line of...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...