Daily News Briefs

Sensor technology company FRAMOS broke ground on the construction of its new campus in Cakovec, Croatia, into which the company said it plans to move next year. The facility marks the largest...

For the last few years, I have taken time in December to reflect on what happened in the last year and what it means for the one to come. I would reflect on the major events within the laser industry...

The only constants in life may be death and taxes, but many would argue that regulatory change is another one of life’s certainties. Proof of this can be seen in the FDA-initiated transition...

Ultrafast optical imaging is typically measured in picoseconds, whereas high-speed electronic cameras image at the millisecond and microsecond timescale. To bridge the gap between these technologies,...

The Zebra FS42, Aurora™ Software Suite, 3S40, and 3S80 from Zebra Technologies Corporation are industrial automation solutions for manufacturers. The Zebra FS42 is a fixed industrial scanner...

The FiberEdge® GN1816 and GN1848 from Semtech are linear transimpedance amplifiers and laser drivers, respectively, for short reach 400 g and 800 g data center applications. The GN1816 is a 56...

The Version 1.0 release of the CapSen PiC software from CapSen Robotics combines 3D vision, motion planning, and control algorithms to give robots the ability to locate, pick, and manipulate objects...

The QE195LP-S-MB from Gentec-EO is a pyroelectric laser energy detector specifically made to measure lasers with extra wide beams in applications such as advanced materials research and processing,...

Adhesives for fiber optic components that perform well on glass, metal, ceramic and most plastic substrates provide excellent chemical and solvent resistance. They also can act as an electrical...

There is a growing market for imaging systems that provides an immediate, slow-motion view of a process that allows one to see events that happen too quickly for the human eye to perceive or...

Neodymium-doped crystals and glasses such as Nd:YAG (neodymium:yttrium aluminum garnet) have long been used as laser gain materials. Optically pumped, they produce an output wavelength close to 1...

Early fiber lasers were inefficient and limited to low powers, until more effective methods emerged to deliver the pump light into the cladding. Valentin Gapontsev, founder and CEO of IPG Photonics,...

We offer custom prisms, polygons, windows, mirrors, and wedges from one source. FISBA not only has the complete production chain in-house, we can also develop entire systems built-to-spec or support...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

The ILMS is designed for profiling focused, high-power industrial lasers. This system combines reimaging/magnification optics, a polarization preserving beam sampler, and a DataRay beam profiler to...

The most common optical thin-film coating produced today (and for more than 80 years!) is the antireflection (AR) coating. This webinar will present the concepts and design principles of AR coatings,...

As the demand for efficient production of optical systems grows in industries ranging from aerospace and defense to medical imaging, the automation of optical assembly processes becomes increasingly...

Dynamic Beam Lasers (DBLs) are fiber lasers based on Coherent Beam Combining (CBC) whose operational properties offer a set of parameters that did not previously exist in lasers. DBLs open new...

The high variety of tailor-fitted molecular structures of Polyethylene (PE) can fulfill the requirements of various applications, however, it also poses difficulty in the mechanical recycling of...

Cutting laser systems are advanced machines that use focused laser beams to cut, engrave, or mark materials with high precision. These systems are widely used in various industries due to their...

Embedded vision refers to the integration of computer vision technologies into various embedded systems, devices, or machines. Computer vision involves teaching machines to interpret and understand...

A fluorescent screen refers to a phosphorescent or fluorescent-coated surface that emits visible light when exposed to other forms of electromagnetic radiation, such as x-rays or ultraviolet light....

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Mega Speed Corporation, founded in 2001 by Canadian Photonic Labs, leads in high-speed imaging technology. We design, manufacture, and market advanced high-speed video cameras, digital video...