Cymer Third-Quarter Revenues Increase 36 Percent

Zebra Technologies, whose barcode and fixed industrial scanning, mobile computing, and industrial machine vision systems support intelligent automation solution, has named its current chief for...

Extremely short laser pulses, in the order of attoseconds, provide a powerful way to probe and image ultrashort processes like the motion of electrons in atoms and molecules. While it is...

Far above an oil pipeline, a drone bobs and weaves. The drone, dispatched by Denver, Colorado-based Project Canary, is collecting high-resolution imaging data of the site, while also scanning for any...

Using a laser ablation patterning technique, researchers from the Korea Institute of Industrial Technology and Pohang University of Science and Technology (POSTECH) fabricated deformable...

The WaveMaker™ 4000A, WaveShaper® 1000B, and WaveShaper® 4000B from Coherent are instruments made to test optical networks. The WaveMaker instrument series operates in the C-band, and...

The TH6D-Advanced from Scansonic is an optical seam tracking scanner that was built for automated joining processes. Using powerful image processing and scalable pattern recognition algorithms, it is...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The Emerald™ Gen2 line from Teledyne e2v is a CMOS image sensor family developed for machine vision, outdoor surveillance, and traffic detection and monitoring cameras. The series is available...

Ultraprecision machining can be defined in general terms as the removal of material from a substrate utilizing a machine tool that operates at a resolution of 10 nm (0.4 μin.) or less. The...

While some design engineers know exactly what they need from their laser diode, others may choose a partner to navigate what can be a complex development process. Laser diode manufacturers know which...

Designing devices that incorporate ultrathin films is an important means of enhancing yields. However, characterizing ultrathin films provides a challenge for mainstream metrology tools such as...

In the three decades since its introduction, the CO2 laser has become the workhorse of industrial lasers. Today it is available in a range of designs and sizes with output powers of 20 kW and more....

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

MKS Newport spectral optics product overview providing a summary of competencies in diffraction gratings, optical filters, optical mirrors, OptoFlash multichannel spectrometer engines, and design &...

MKS' Newport OptoFlash delivers up toe 10 discrete channels where pre-determined wavelength detection is essential to acquiring fast sample measurements.

Among metal additive manufacturing technologies, laser-based direct energy deposition (LB-DED) processes, in which a focused laser source is used to melt-fuse materials as they are deposited, are...

Lasers are made of physical matter. Therefore, the natural degradation of their materials can cause variability in performance. Aging optics often cause slow changes in laser behavior and, when left...

The internet has had a revolutionary impact on our world. The vision of quantum internet — capable of transmitting quantum information — will provide novel applications that are provably...

Two critical elements in the ever-growing deployment of intelligent camera systems with machine learning AI capabilities is data quality and data quantity. The sensor that generates this information...

A cryogenically cooled long-wave infrared (LWIR) camera is a specialized thermal imaging device designed to detect infrared radiation in the long-wave infrared spectrum, typically ranging from 8 to...

Micro-optics refers to the design, fabrication, and application of optical components and systems at a microscale level. These components are miniaturized optical elements that manipulate light at a...

A helium-neon (HeNe) laser is a type of gas laser that emits visible red light at a wavelength of 632.8 nm. It operates based on the principle of stimulated emission of photons from excited helium...

Scribing and engraving laser systems are types of laser equipment used for precision cutting, marking, and engraving on various materials. Scribing laser systems: Definition: Scribing...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

Data analysis software is a category of software tools used for the systematic examination of data sets to uncover patterns, trends, relationships, and insights. It supports a range of analytical...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

AOS Technologies AG is a worldwide renowned manufacturer of High Speed Cameras and High Speed Streaming Systems. The cameras and systems are used in industrial, automotive crash test, and defense...