Search
Menu
PI Physik Instrumente - Space Qualified Steering LB LW 12/24

Optical Data Storage Dips Below the Diffraction Limit

Facebook X LinkedIn Email
Physicists at The City College of New York (CCNY) have developed a technique with the potential to enhance optical data storage capacity in diamonds. This is possible by multiplexing the storage in the spectral domain.

“It means that we can store many different images at the same place in the diamond by using a laser of a slightly different color to store different information into different atoms in the same microscopic spots,” said Tom Delord, postdoctoral research associate at CCNY. “If this method can be applied to other materials or at room temperature, it could find its way to computing applications requiring high-capacity storage.”
Protocol for charge state control of color centers in a high-density sample. CCNY researchers address sub-ensembles of atoms at the same spot but at different frequencies to imprint 12 images at the same location. Courtesy of Nature Nanotechnology.
Protocol for charge state control of color centers in a high-density sample. CCNY researchers address sub-ensembles of atoms at the same spot but at different frequencies to imprint 12 images at the same location. Courtesy of Nature Nanotechnology.

The research focused on a tiny element in diamonds and similar materials, known as “color centers.” These, basically, are atomic defects that can absorb light and serve as a platform for what are termed quantum technologies.

“What we did was control the electrical charge of these color centers very precisely using a narrow-band laser and cryogenic conditions” Delord said. “This new approach allowed us to essentially write and read tiny bits of data at a much finer level than previously possible, down to a single atom.”

Optical memory technologies have a resolution defined by diffraction limit, the minimum diameter that a beam can be focused to, which approximately scales as half the light beam wavelength (for example, green light would have a diffraction limit of 270 nm).

Bristol Instruments, Inc. - 872 Series LWM 10/24 MR

“So, you cannot use a beam like this to write with resolution smaller than the diffraction limit because if you displace the beam less than that, you would impact what you already wrote. So normally, optical memories increase storage capacity by making the wavelength shorter (shifting to the blue), which is why we have Blu-ray technology,” Delord said.

What differentiates the CCNY optical storage approach from others is that it circumvents the diffraction limit by exploiting the slight color (wavelength) changes existing between color centers separated by less than the diffraction limit.

“By tuning the beam to slightly shifted wavelengths, it can be kept at the same physical location but interact with different color centers to selectively change their charges — that is, to write data with sub-diffraction resolution,” said Richard C. Monge, a postdoctoral fellow at CCNY who was involved in the study as a Ph.D. student.

Another unique aspect of this approach is that it’s reversible.

“One can write, erase, and rewrite an infinite number of times,” Monge said. “While there are some other optical storage technologies also able to do this, this is not the typical case, especially when it comes to high spatial resolution. A Blu-ray Disc is again a good reference example — you can write a movie in it but you cannot erase it and write another one.”

The research was published in Nature Nanotechnology (www.doi.org/10.1038/s41565-023-01542-9).

Published: December 2023
Research & TechnologyLasersOpticsdiamondoptical storagedatadata storagestoragememorycomputingCity College of New YorkCUNYAmericasNature Nanotechnologydiffraction limitTechnology News

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.