Search
Menu
Spectrogon US - Optical Filters 2024 LB

Nanotube Membrane H20 Flow Controlled

Facebook X LinkedIn Email
Troy, N.Y., Feb. 22, 2007 -- By fusing wet and dry nanotechnologies, a Rensselaer Polytechnic Institute team has found a way to control the flow of water through carbon nanotube membranes with unprecedented precision. Their work could inspire technologies designed to transform salt water into pure drinking water almost instantly or to immediately separate a specific strand of DNA from the biological jumble.

Nanotube membranes have fascinated researchers with their combination of high flow rates and high selectivity, allowing them to filter out very small impurities and other organic materials like DNA and proteins from materials with high water content. The problem is that nanotube arrays are hydrophobic, strongly repelling water.
rpi-water-flow.jpg
Precise control of water transport through a nanotube membrane is demonstrated by the new electro-chemical approach. (Photo: Rensselaer)
“We have, at a very fundamental level, discovered that there is a new mechanism to control water transport,” said Nikhil Koratkar, an associate professor of mechanical engineering at Rensselaer and lead author of the paper. “This is the first time that electrochemical means can be used to control the way that the water interacts with the surface of the nanotube.”

A group of Rensselaer researchers led by Koratkar has found a way to use low-voltage electricity to manipulate the flow of water through nanotubes. Control of water’s movement through a nanotube with this level of precision has never been demonstrated before.

“In this century, one of the big challenges is how to get clean drinking water,” Koratkar said. “If you can remove salt from water you can solve this problem. Nature does this all the time. The first step to getting to this process is to control the flow of water through nanochannels, which we have now successfully demonstrated. This is the starting part of the research. The next step would be to capture specific proteins, DNA, or impurities within the water with specifically designed nanotubes.”

The researchers discovered that when the nanotube’s membrane is given a small positive potential of only 1.7 volts, and the water is given a negative potential, the nanotubes quickly switch from repelling water to pumping water through the tube. When the charge on the water is raised, the water flows through at an exponentially faster rate. When the experiment is reversed with a negatively charged nanotube, it takes much higher voltage (90 volts) to move the water through the tube.

Sheetak -  Cooling at your Fingertip 11/24 MR

By simply reversing the polarity of the nanotubes, the team found that they could actually start and stop the flow of water through the tube. When a small positive charge is administered the water moves through the tube, and when that charge is reversed the water flow stops.

The researchers determined that the nanotube walls had been electrochemically oxidized as a result of water electrolysis, meaning that oxygen atoms had coated the surface of the nanotubes enabling the movement of water through the tube. Once the charge is reversed, oxidation stops and the water can no longer flow through the unoxidized portion of the tube.

They also discovered that they could control the rate of water flow through nanotubes sitting directly next to each other, allowing one tube to pump quickly while the one next to it didn’t pump water at all. Such an extreme difference in water absorption so close together is unprecedented and could have major implications for time-released drug coatings, lab-on-a-chip devices and water capture that mimics some of nature’s most efficient water-harvesting materials.

The research is the first step to creating nanotube devices built to filter out specific elements from water and organic materials. With this enabling research in place, more efficient micro-filtration and separation techniques can be created for environmental restoration, the production of safe drinking water, biomedical research and advanced circuitry.

Pulickel Ajayan, a materials science and engineering professor at Rensselaer and a world-renowned expert in fabricating nanotube materials, collaborated with Koratkar on this project. Four other Rensselaer researchers were involved with the research: Saroj Nayak, associate professor of physics; postdoctoral researcher Lijie Ci; and doctoral students Li Chen and Zuankai Wang.

The research, which will be described in the March 14, 2007, issue of the journal Nano Letters, was funded as part of a four-year $1.3 million grant from the National Science Foundation.

For more information, visit: www.rpi.edu

Published: February 2007
Glossary
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
BiophotonicsCoatingsflow of water through carbon nanotube membranesIndustry EventsnanoNews & Featuresphotonicspure drinking waterRensselaerresselaer polytechnic instituteRPIspecific strand of DNAwet and dry nanotechnologies

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.