Search
Menu
Meadowlark Optics - Wave Plates 6/24 LB 2024

Infrared Spectroscopy Moves to the Fast Lane

Facebook X LinkedIn Email
JOEL WILLIAMS, ASSOCIATE EDITOR
[email protected]

Researchers at the University of Tokyo have developed a technique to drastically increase the speed of infrared spectroscopy. The technique, called time-stretch infrared spectroscopy, surpasses dual-comb spectroscopy nearly 10× over. The research could enable observation of very quick chemical reactions, as well as new applications in high-speed imaging or label-free flow cytometry.

“I have worked on developing dual-comb spectroscopy for a while and noticed its advantages and disadvantages, and realized that we need another technique to improve its measurement speed with higher sensitivity,” said Takuro Ideguchi of the Institute for Photon Science and Technology at the University of Tokyo.
Laser pulses lasting for mere femtoseconds (one-quadrillionth of a second) are stretched to the nanosecond (one-billionth of a second) range. Courtesy of Ideguchi et al.
Laser pulses lasting for mere femtoseconds are stretched to the nanosecond range. Courtesy of Ideguchi et al.

To achieve that end, Ideguchi sought some new time-increasing components: a time-stretcher and a detector. With those in hand, Ideguchi and his students started their experiment. 

The laser pulse is stretched with a technique called free-space angular-chirp-enhanced-delay. The system consists of a grating, a pair of curved mirrors, and a flat mirror pair with a slight angle. The light is dispersed through the grating and relayed with the curved mirrors to the flat mirrors. At the entrance of the flat mirror, different colors have different incident angles.

“These light components reflect multiple times on the flat mirrors and finally reflect back to the same path,” Ideguchi said. “Since the different colors travel different paths, the output pulse gets stretched.”

Sheetak -  Cooling at your Fingertip 11/24 MR
The system consists of various optical components including lasers, mirrors, lenses and detectors. It can detect wavelengths between 4.4 and 4.9 µmicrometers (thousandths of a millimeter). Courtesy of Ideguchi et al.
The system consists of various optical components including lasers, mirrors, lenses, and detectors. It can detect wavelengths between 4.4 and 4.9 µm. Courtesy of Ideguchi et al.

The stretching of the pulse allows a detector to more accurately receive and analyze the signal. The detector, developed by one of the research paper’s authors, Tatsuo Dougakiuchi of Hamamatsu Photonics, is a quantum cascade detector, based on the quantum cascade laser. Because absorption and emission are opposite processes, Ideguchi said, they can use the semiconductor chip as both a detector and a laser.

The system is capable of reading 80 million spectra per second.

“This method, time-stretch infrared spectroscopy, is about 100 times faster than dual-comb spectroscopy, which had reached an upper speed limit due to issues of sensitivity,” Ideguchi said.

Ideguchi and his team envision the technology being used for the monitoring of rapid chemical changes and high-throughput measurement.

The research was published in Communications Physics (www.doi.org/10.1038/s42005-020-00420-3).

Published: September 2020
Glossary
infrared spectroscopy
The measurement of the ability of matter to absorb, transmit or reflect infrared radiation and the relating of the resultant data to chemical structure.
infrared
Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths roughly between 700 nanometers (nm) and 1 millimeter (mm). It is divided into three main subcategories: Near-infrared (NIR): Wavelengths from approximately 700 nm to 1.4 micrometers (µm). Near-infrared light is often used in telecommunications, as well as in various imaging and sensing...
detector
1. A device designed to convert the energy of incident radiation into another form for the determination of the presence of the radiation. The device may function by electrical, photographic or visual means. 2. A device that provides an electric output that is a useful measure of the radiation that is incident on the device.
quantum cascade laser
A quantum cascade laser (QCL) is a type of semiconductor laser that operates based on the principles of quantum mechanics. It is a versatile and powerful device used for emitting coherent light in the mid-infrared to terahertz range of the electromagnetic spectrum. Quantum cascade lasers were first proposed by Federico Capasso, Jerome Faist, Deborah Sivco, Carlo Sirtori, Albert Hutchinson, and Alfred Cho in 1994. Key features and principles of quantum cascade lasers: Quantum cascade...
Research & Technologyspectroscopyinfrared spectroscopytime-stretchtime-stretch infrared spectroscopyinfrareddual comb spectroscopydual-comb spectroscopyUniversity of TokyoThe University of TokyoAsia-Pacificdetectorquantum cascade laserquantum cascadeTech Pulse

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.