Search
Menu
CMC Electronics - Advanced Low-Noise 2024 LB

IR camera senses hot spots to aid firefighters, military pilots

Facebook X LinkedIn Email
Ashley N. Paddock, [email protected]

Firefighters and military pilots often use very cold, cumbersome infrared devices to detect hot spots and see through smoke, but a technology that uses gallium nitride (GaN) could eliminate the need for those conventional instruments.

Researchers at the University of Central Florida, led by professors David Hagan and Eric Van Stryland, have discovered that GaN – currently used to read Blu-ray DVDs – could offer an alternative to expensive liquid nitrogen, which boils at —200 °C.


Professor David Hagan, at right, and professor Eric Van Stryland, both of the University of Central Florida, have found that gallium nitride could replace liquid nitrogen to reduce the size of infrared detectors. Courtesy of the University of Central Florida.


Although much more research is needed, Hagan and Van Stryland believe that infrared sensors on military airplanes or lightweight cameras could be possible applications for their technology. Infrared detection and other thermal imaging systems are usually based on mercury cadmium telluride (MCT). Researchers have long wanted to see if GaN could detect infrared light and produce results similar to those achieved with MCT detectors.

To test the theory, the scientists used uncooled GaN detectors and employed two-photon absorption, using two photons of light at different wavelengths. They observed that GaN, as a semiconductor, is surprisingly sensitive to infrared. They used short bursts of light to conduct their initial experiments but soon plan to test the longer bursts that would be required to make the new technology practical, and they are looking to develop devices that can house it.

While the method is suitable for detection, they hope to expand into other applications such as all-optical switching, in which they could control one light beam with another. They have also envisioned two-photon gain and two-photon lasers.

The team’s research appeared online Aug. 7 in Nature Photonics (doi: 10.1038/nphoton.2011.168).
OSI Optoelectronics - Design & Manufacturing Standard Oct 22 MR

Published: November 2011
Glossary
gallium nitride
Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is widely used in the production of various electronic and optoelectronic devices, including light-emitting diodes (LEDs), laser diodes, power electronics, and high-frequency communication devices. Key points about gallium nitride (GaN): Chemical composition: Gallium nitride is a binary compound...
thermal imaging
Thermal imaging is a technology that detects infrared radiation (heat) emitted by objects and converts it into an image, known as a thermogram, which displays temperature variations in different colors. Unlike visible light imaging, thermal imaging does not require any ambient light and can be used in complete darkness or through obstructions such as smoke, fog, and certain materials. Thermal cameras use sensors to detect infrared radiation and generate images based on the temperature...
AmericasBlu-ray DVDscamerasDavid HagandefenseEric Van StrylandFloridagallium nitrideGaNImaginginfrared detectioninfrared devicesinfrared sensorsMCTMCT detectorsmercury cadmium telluridemilitary airplanesResearch & TechnologysemiconductorsSensors & DetectorsTech Pulsethermal imagingtwo-photon absorptionUniversity of Central Florida

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.